docker-compose整合FastDFS

前言

超简单的部署FastDFS方式，之前lz也发布过如何在服务器直接安装部署fastdfs与nginx，过程是否麻烦并且没有一定基础的人不一定能部署好，但是使用现在的方式部署，那真的是妈妈再也不用担心我部署的FastDFS无法使用，话不多说，快上车。

成功运行后文件结构如下图所示，只需要docker-compose.yml、nginx.conf、storage.conf三个文件就可以运行，话不多说直接上代码。如果是为了运行起来，不要做任何修改，只需要将三个文件代码拷贝到同一个目录下使用指令docker-compose up -d就可以修改，容器会自动修改里面的配置文件为容器IP地址

docker-compose.yml
映射的端口可以自己修改，里面的内容不需要做任何修改，项目启动后会自动修改配置文件中的配置为容器的IP地址

version: '3'
services:tracker:image: season/fastdfs:1.2container_name: trackerrestart: alwaysvolumes:- "./tracker_data:/fastdfs/tracker/data"ports: - "22122:22122"command: "tracker" storage:image: season/fastdfs:1.2container_name: storagelinks: - trackerrestart: alwaysvolumes:- "./storage.conf:/fdfs_conf/storage.conf"- "./storage_base_path:/fastdfs/storage/data"- "./store_path0:/fastdfs/store_path"  ports: - "23000:23000"environment:TRACKER_SERVER: "tracker:22122"command: "storage"nginx:image: season/fastdfs:1.2container_name: fdfs-nginxrestart: alwaysvolumes:- "./nginx.conf:/etc/nginx/conf/nginx.conf"- "./store_path0:/fastdfs/store_path"links: - trackerports: - "8088:8088"environment:TRACKER_SERVER: "tracker:22122"command: "nginx"

nginx.conf

#user  nobody;
worker_processes  1;#error_log  logs/error.log;
#error_log  logs/error.log  notice;
#error_log  logs/error.log  info;#pid        logs/nginx.pid;events {worker_connections  1024;
}http {include       mime.types;default_type  application/octet-stream;#access_log  logs/access.log  main;sendfile        on;#tcp_nopush     on;#keepalive_timeout  0;keepalive_timeout  65;#gzip  on;server {listen       8088;server_name  localhost;#charset koi8-r;#缩略图需要使用插件，需要单独构建nginx镜像，此处忽略#location /group([0-9])/M00/.*\.(gif|jpg|jpeg|png)$ {#   root /fastdfs/storage/data;#   image on;#   image_output off;         #   image_jpeg_quality 75;#   image_backend off;#    image_backend_server http://baidu.com/docs/aabbc.png;# }# group1location /group1/M00 {# 文件存储目录root /fastdfs/storage/data;ngx_fastdfs_module;}#error_page  404              /404.html;# redirect server error pages to the static page /50x.html#error_page   500 502 503 504  /50x.html;location = /50x.html {root   html;}}
}

storage.conf

#is this config file disabled
# false for enabled
# true for disabled
disabled=false# the name of the group this storage server belongs to
group_name=group1# bind an address of this host
# empty for bind all addresses of this host
bind_addr=# if bind an address of this host when connect to other servers
# (this storage server as a client)
# true for binding the address configed by above parameter: "bind_addr"
# false for binding any address of this host
client_bind=true# the storage server port
port=23000# connect timeout in seconds
# default value is 30s
connect_timeout=30# network timeout in seconds
# default value is 30s
network_timeout=60# heart beat interval in seconds
heart_beat_interval=30# disk usage report interval in seconds
stat_report_interval=60# the base path to store data and log files
base_path=/fastdfs/storage# max concurrent connections the server supported
# default value is 256
# more max_connections means more memory will be used
max_connections=256# the buff size to recv / send data
# this parameter must more than 8KB
# default value is 64KB
# since V2.00
buff_size = 256KB# accept thread count
# default value is 1
# since V4.07
accept_threads=1# work thread count, should <= max_connections
# work thread deal network io
# default value is 4
# since V2.00
work_threads=4# if disk read / write separated
##  false for mixed read and write
##  true for separated read and write
# default value is true
# since V2.00
disk_rw_separated = true# disk reader thread count per store base path
# for mixed read / write, this parameter can be 0
# default value is 1
# since V2.00
disk_reader_threads = 1# disk writer thread count per store base path
# for mixed read / write, this parameter can be 0
# default value is 1
# since V2.00
disk_writer_threads = 1# when no entry to sync, try read binlog again after X milliseconds
# must > 0, default value is 200ms
sync_wait_msec=50# after sync a file, usleep milliseconds
# 0 for sync successively (never call usleep)
sync_interval=0# storage sync start time of a day, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
sync_start_time=00:00# storage sync end time of a day, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
sync_end_time=23:59# write to the mark file after sync N files
# default value is 500
write_mark_file_freq=500# path(disk or mount point) count, default value is 1
store_path_count=1# store_path#, based 0, if store_path0 not exists, it's value is base_path
# the paths must be exist
store_path0=/fastdfs/store_path
#store_path1=/home/yuqing/fastdfs2# subdir_count  * subdir_count directories will be auto created under each
# store_path (disk), value can be 1 to 256, default value is 256
subdir_count_per_path=256# tracker_server can ocur more than once, and tracker_server format is
#  "host:port", host can be hostname or ip address
tracker_server=192.168.209.121:22122#standard log level as syslog, case insensitive, value list:
### emerg for emergency
### alert
### crit for critical
### error
### warn for warning
### notice
### info
### debug
log_level=info#unix group name to run this program,
#not set (empty) means run by the group of current user
run_by_group=#unix username to run this program,
#not set (empty) means run by current user
run_by_user=# allow_hosts can ocur more than once, host can be hostname or ip address,
# "*" means match all ip addresses, can use range like this: 10.0.1.[1-15,20] or
# host[01-08,20-25].domain.com, for example:
# allow_hosts=10.0.1.[1-15,20]
# allow_hosts=host[01-08,20-25].domain.com
allow_hosts=*# the mode of the files distributed to the data path
# 0: round robin(default)
# 1: random, distributted by hash code
file_distribute_path_mode=0# valid when file_distribute_to_path is set to 0 (round robin),
# when the written file count reaches this number, then rotate to next path
# default value is 100
file_distribute_rotate_count=100# call fsync to disk when write big file
# 0: never call fsync
# other: call fsync when written bytes >= this bytes
# default value is 0 (never call fsync)
fsync_after_written_bytes=0# sync log buff to disk every interval seconds
# must > 0, default value is 10 seconds
sync_log_buff_interval=10# sync binlog buff / cache to disk every interval seconds
# default value is 60 seconds
sync_binlog_buff_interval=10# sync storage stat info to disk every interval seconds
# default value is 300 seconds
sync_stat_file_interval=300# thread stack size, should >= 512KB
# default value is 512KB
thread_stack_size=512KB# the priority as a source server for uploading file.
# the lower this value, the higher its uploading priority.
# default value is 10
upload_priority=10# the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
# multi aliases split by comma. empty value means auto set by OS type
# default values is empty
if_alias_prefix=# if check file duplicate, when set to true, use FastDHT to store file indexes
# 1 or yes: need check
# 0 or no: do not check
# default value is 0
check_file_duplicate=0# file signature method for check file duplicate
## hash: four 32 bits hash code
## md5: MD5 signature
# default value is hash
# since V4.01
file_signature_method=hash# namespace for storing file indexes (key-value pairs)
# this item must be set when check_file_duplicate is true / on
key_namespace=FastDFS# set keep_alive to 1 to enable persistent connection with FastDHT servers
# default value is 0 (short connection)
keep_alive=0# you can use "#include filename" (not include double quotes) directive to
# load FastDHT server list, when the filename is a relative path such as
# pure filename, the base path is the base path of current/this config file.
# must set FastDHT server list when check_file_duplicate is true / on
# please see INSTALL of FastDHT for detail
##include /home/yuqing/fastdht/conf/fdht_servers.conf# if log to access log
# default value is false
# since V4.00
use_access_log = false# if rotate the access log every day
# default value is false
# since V4.00
rotate_access_log = false# rotate access log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.00
access_log_rotate_time=00:00# if rotate the error log every day
# default value is false
# since V4.02
rotate_error_log = false# rotate error log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.02
error_log_rotate_time=00:00# rotate access log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_access_log_size = 0# rotate error log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_error_log_size = 0# if skip the invalid record when sync file
# default value is false
# since V4.02
file_sync_skip_invalid_record=false# if use connection pool
# default value is false
# since V4.05
use_connection_pool = false# connections whose the idle time exceeds this time will be closed
# unit: second
# default value is 3600
# since V4.05
connection_pool_max_idle_time = 3600# use the ip address of this storage server if domain_name is empty,
# else this domain name will ocur in the url redirected by the tracker server
http.domain_name=tracker_server=tracker:22122# the port of the web server on this storage server
http.server_port=8888

最后cd到放三个文件的目录下，使用指令启动docker-compose

docker-compose up -d

测试

进入到storage节点

docker exec -it storage /bin/bash

进入 storage 容器中使用命令上传一个图片, 可使用容器自带的测试图片, 也可 docker cp 将本机图片复制进来

cd /fdfs_conf
fdfs_upload_file storage.conf anti-steal.jpg #上传一个图片吧, 返回路径如 /group1/M00/00/00/xxxx

访问 localhost:8088/group1/M00/00/00/xxxx 出现防盗链图片即代表部署成功

相信部署过FastDFS的小伙伴就知道这玩意有多麻烦，各种配置文件另外还需要跟服务器IP有关系，为了好用可能还需要设置静态IP，或者编写脚本自动修改像storage.conf以及client.conf等里面的ip配置，麻烦的很，有了docker-compose啥也不用管，太好用了，赞！有兴趣的也可以查看docker hub上的season/fastdfs:1.2的镜像，readme也是十分好理解的

创作不易，记得点赞哦

docker-compose整合FastDFS相关推荐

自动化代码审查平台: 基于Docker Compose整合Jenkins + SonarQube
目录代码审查平台本文目标环境要求系统环境组件服务版本前言代码评审 SonarQube简介概述部署流程检查系统参数设置系统参数拉取代码进入文件目录创建数据卷目录部署文件信息 ...
Docker搭建分布式文件系统fastDFS及SpringBoot整合fastDFS
docker安装fastdfs镜像 docker pull morunchang/fastdfs 运行tracker docker run -d --name tracker --net=host m ...
.NET遇上Docker - 使用Docker Compose组织Ngnix和.NETCore运行
本文工具准备: Docker for Windows Visual Studio 2015 与 Visual Studio Tools for Docker 或 Visual Studio 2017 ...
Docker中搭建FastDFS文件系统（多图）
关于FastDFS FastDFS 是以 C 语言开发的一项开源轻量级分布式文件系统,他对文件进行管理,主要功能有:文件存储,文件同步,文件访问(文件上传/下载)等,特别适合以文件为载体的在线服务,如 ...
使用Docker Compose管理多个容器
使用Docker Compose管理多个容器 Docker Compose是一个用来定义和运行复杂应用的Docker工具.使用Compose,你可以在一个文件中定义一个多容器应用,然后使用一条命令来启 ...
Docker Compose运行MySQL、Redis服务
Docker Compose运行MySQL.Redis服务前言:通过容器来统一管理开发中使用到的依赖,顺便学习docker-compose 1.docker-compose.yml 文件说明 2.d ...
fastdfs中浏览器访问获取不到文件_SpringBoot 2.0 开发案例之整合FastDFS分布式文件系统...
原作者:小柒地址:https://blog.52itstyle.vip/archives/4837/ 前言最近在做一款图床服务,前面的文章也有提到,之前整合了阿里云 OSS 做图片存储,虽然小批量 ...
docker-compose（二）：SpringBoot + Docker Compose
原文地址:http://www.linzichen.cn/article/1597479427321626624 在上篇 docker-compose(一):SpringBoot + Docker 案 ...
Docker 学习笔记 - 进阶四 Docker网络和 Docker compose
Docker 学习笔记 - 进阶四 Docker网络和 Docker compose 4. docker 网络 4.1 docker network是什么 4.1.1 docker不启动,默认网络情况 ...
Docker compose 容器编排
1. 概述问题:如果要使用 Docker 运行 LNMP 架构,那么 Nginx.MySQL.PHP. Linux三个服务运行在一个容器里,还是运行在多个容器里呢? 答案是都可以. 你可以分别放在三 ...

docker-compose整合FastDFS

前言

测试

docker-compose整合FastDFS相关推荐

最新文章

热门文章