开发板：Ultra96

Xilinx Vivado：2018.2

1.开发板文件配置

首先要下载Ultra96的开发板定义文件（Board Definition Files），https://github.com/Avnet/bdf，从GitHub上下载AVNET所有开发板文件，如下所示：

对于Ultra96现在有ultra96v1_1.2，ultra96v2_1.0两个版本。将其拷贝到Vivado对应的board_files文件夹下，<install_location>\Vivado\<Vivado Version>\data\boards\board_files，如下所示：

这样我们在建工程时就可以直接选择对应Ultra96开发板了。

2.硬件需求

与Ultra96开发板配套的JTAG是Ultra96 USB-to-JTAG/UART Pod，如下所示，microUSB连接电脑，下载调试。

3.约束文件

板子约束文件可以从官网下载。


# ----------------------------------------------------------------------------
# Bluetooth
# ----------------------------------------------------------------------------
# Bank 26
set_property PACKAGE_PIN C8   [get_ports {BT_AUD_CLK              }];  # "C8.BT_AUD_CLK"
set_property PACKAGE_PIN A8   [get_ports {BT_AUD_FSYNC            }];  # "A8.BT_AUD_FSYNC"
set_property PACKAGE_PIN A9   [get_ports {BT_AUD_IN               }];  # "A9.BT_AUD_IN"
set_property PACKAGE_PIN B9   [get_ports {BT_AUD_OUT              }];  # "B9.BT_AUD_OUT"
set_property PACKAGE_PIN B5   [get_ports {BT_HCI_CTS              }];  # "B5.BT_HCI_CTS"
set_property PACKAGE_PIN B7   [get_ports {BT_HCI_RTS              }];  # "B7.BT_HCI_RTS"# ----------------------------------------------------------------------------
# High-speed expansion connector
# ----------------------------------------------------------------------------
# Bank 65
set_property PACKAGE_PIN P1   [get_ports {CSI0_C_N                }];  # "P1.CSI0_C_N"
set_property PACKAGE_PIN N2   [get_ports {CSI0_C_P                }];  # "N2.CSI0_C_P"
set_property PACKAGE_PIN N4   [get_ports {CSI0_D0_N               }];  # "N4.CSI0_D0_N"
set_property PACKAGE_PIN N5   [get_ports {CSI0_D0_P               }];  # "N5.CSI0_D0_P"
set_property PACKAGE_PIN M1   [get_ports {CSI0_D1_N               }];  # "M1.CSI0_D1_N"
set_property PACKAGE_PIN M2   [get_ports {CSI0_D1_P               }];  # "M2.CSI0_D1_P"
set_property PACKAGE_PIN M4   [get_ports {CSI0_D2_N               }];  # "M4.CSI0_D2_N"
set_property PACKAGE_PIN M5   [get_ports {CSI0_D2_P               }];  # "M5.CSI0_D2_P"
set_property PACKAGE_PIN L1   [get_ports {CSI0_D3_N               }];  # "L1.CSI0_D3_N"
set_property PACKAGE_PIN L2   [get_ports {CSI0_D3_P               }];  # "L2.CSI0_D3_P"
set_property PACKAGE_PIN T2   [get_ports {CSI1_C_N                }];  # "T2.CSI1_C_N"
set_property PACKAGE_PIN T3   [get_ports {CSI1_C_P                }];  # "T3.CSI1_C_P"
set_property PACKAGE_PIN R3   [get_ports {CSI1_D0_N               }];  # "R3.CSI1_D0_N"
set_property PACKAGE_PIN P3   [get_ports {CSI1_D0_P               }];  # "P3.CSI1_D0_P"
set_property PACKAGE_PIN U1   [get_ports {CSI1_D1_N               }];  # "U1.CSI1_D1_N"
set_property PACKAGE_PIN U2   [get_ports {CSI1_D1_P               }];  # "U2.CSI1_D1_P"
set_property PACKAGE_PIN H5   [get_ports {DSI_CLK_N               }];  # "H5.DSI_CLK_N"
set_property PACKAGE_PIN J5   [get_ports {DSI_CLK_P               }];  # "J5.DSI_CLK_P"
set_property PACKAGE_PIN F1   [get_ports {DSI_D0_N                }];  # "F1.DSI_D0_N"
set_property PACKAGE_PIN G1   [get_ports {DSI_D0_P                }];  # "G1.DSI_D0_P"
set_property PACKAGE_PIN E3   [get_ports {DSI_D1_N                }];  # "E3.DSI_D1_N"
set_property PACKAGE_PIN E4   [get_ports {DSI_D1_P                }];  # "E4.DSI_D1_P"
set_property PACKAGE_PIN D1   [get_ports {DSI_D2_N                }];  # "D1.DSI_D2_N"
set_property PACKAGE_PIN E1   [get_ports {DSI_D2_P                }];  # "E1.DSI_D2_P"
set_property PACKAGE_PIN C3   [get_ports {DSI_D3_N                }];  # "C3.DSI_D3_N"
set_property PACKAGE_PIN D3   [get_ports {DSI_D3_P                }];  # "D3.DSI_D3_P"
set_property PACKAGE_PIN C2   [get_ports {HSIC_DATA               }];  # "C2.HSIC_DATA"
# Bank 66
set_property PACKAGE_PIN A2   [get_ports {HSIC_STR                }];  # "A2.HSIC_STR"
# Bank 26
set_property PACKAGE_PIN E8   [get_ports {CSI0_MCLK               }];  # "E8.CSI0_MCLK"
set_property PACKAGE_PIN D8   [get_ports {CSI1_MCLK               }];  # "D8.CSI1_MCLK"# ----------------------------------------------------------------------------
# Fan control
# ----------------------------------------------------------------------------
# Bank 65
set_property PACKAGE_PIN F4   [get_ports {FAN_PWM                 }];  # "F4.FAN_PWM"# ----------------------------------------------------------------------------
# Low-speed expansion connector
# ----------------------------------------------------------------------------
# Bank 65
set_property PACKAGE_PIN D7   [get_ports {HD_GPIO_0               }];  # "D7.HD_GPIO_0"
set_property PACKAGE_PIN F8   [get_ports {HD_GPIO_1               }];  # "F8.HD_GPIO_1"
set_property PACKAGE_PIN F7   [get_ports {HD_GPIO_2               }];  # "F7.HD_GPIO_2"
set_property PACKAGE_PIN G7   [get_ports {HD_GPIO_3               }];  # "G7.HD_GPIO_3"
set_property PACKAGE_PIN F6   [get_ports {HD_GPIO_4               }];  # "F6.HD_GPIO_4"
set_property PACKAGE_PIN G5   [get_ports {HD_GPIO_5               }];  # "G5.HD_GPIO_5"
set_property PACKAGE_PIN A6   [get_ports {HD_GPIO_6               }];  # "A6.HD_GPIO_6"
set_property PACKAGE_PIN A7   [get_ports {HD_GPIO_7               }];  # "A7.HD_GPIO_7"
set_property PACKAGE_PIN G6   [get_ports {HD_GPIO_8               }];  # "G6.HD_GPIO_8"
set_property PACKAGE_PIN E6   [get_ports {HD_GPIO_9               }];  # "E6.HD_GPIO_9"
set_property PACKAGE_PIN E5   [get_ports {HD_GPIO_10              }];  # "E5.HD_GPIO_10"
set_property PACKAGE_PIN D6   [get_ports {HD_GPIO_11              }];  # "D6.HD_GPIO_11"
set_property PACKAGE_PIN D5   [get_ports {HD_GPIO_12              }];  # "D5.HD_GPIO_12"
set_property PACKAGE_PIN C7   [get_ports {HD_GPIO_13              }];  # "C7.HD_GPIO_13"
set_property PACKAGE_PIN B6   [get_ports {HD_GPIO_14              }];  # "B6.HD_GPIO_14"
set_property PACKAGE_PIN C5   [get_ports {HD_GPIO_15              }];  # "C5.HD_GPIO_15"# ----------------------------------------------------------------------------
# IOSTANDARD Constraints
#
# Note that these IOSTANDARD constraints are applied to all IOs currently
# assigned within an I/O bank.  If these IOSTANDARD constraints are
# evaluated prior to other PACKAGE_PIN constraints being applied, then
# the IOSTANDARD specified will likely not be applied properly to those
# pins.  Therefore, bank wide IOSTANDARD constraints should be placed
# within the XDC file in a location that is evaluated AFTER all
# PACKAGE_PIN constraints within the target bank have been evaluated.
# ---------------------------------------------------------------------------- # Set the bank voltage for IO Bank 26 to 1.8V
set_property IOSTANDARD LVCMOS18 [get_ports -of_objects [get_iobanks 26]];# Set the bank voltage for IO Bank 65 to 1.2V
set_property IOSTANDARD LVCMOS12 [get_ports -of_objects [get_iobanks 65]];# Set the bank voltage for IO Bank 66 to 1.2V
set_property IOSTANDARD LVCMOS12 [get_ports -of_objects [get_iobanks 66]];# ----------------------------------------------------------------------------
# PS MIO -
# For reference only - these are assigned in the FSBL
# Pin Location and IOSTANDARD constraints are not necessary
# ---------------------------------------------------------------------------- # J6 UART
#set_property PACKAGE_PIN U4   [get_ports {MIO0_UART1_TX           }];  # "U4.MIO0_UART1_TX"
#set_property PACKAGE_PIN W1   [get_ports {MIO1_UART1_RX           }];  # "W1.MIO1_UART1_RX"# Bluetooth
#set_property PACKAGE_PIN V2   [get_ports {MIO2_UART0_RX_BT_HCI_TX }];  # "V2.MIO2_UART0_RX_BT_HCI_TX"
#set_property PACKAGE_PIN U5   [get_ports {MIO3_UART0_TX_BT_HCI_RX }];  # "U5.MIO3_UART0_TX_BT_HCI_RX"
#set_property PACKAGE_PIN V3   [get_ports {MIO8_BT_EN              }];  # "V3.MIO8_BT_EN"# I2C Mux
#set_property PACKAGE_PIN U6   [get_ports {MIO4_I2C1_SCL           }];  # "U6.MIO4_I2C1_SCL"
#set_property PACKAGE_PIN AA1  [get_ports {MIO5_I2C1_SDA           }];  # "AA1.MIO5_I2C1_SDA"
#set_property PACKAGE_PIN AB2  [get_ports {MIO12_I2C_MUX_RESET_B   }];  # "AB2.MIO12_I2C_MUX_RESET_B"# High-speed expansion connector
#set_property PACKAGE_PIN Y1   [get_ports {MIO6_SPI1_SCLK          }];  # "Y1.MIO6_SPI1_SCLK"
#set_property PACKAGE_PIN V5   [get_ports {MIO9_SPI1_CS            }];  # "V5.MIO9_SPI1_CS"
#set_property PACKAGE_PIN AA2  [get_ports {MIO10_SPI1_MISO         }];  # "AA2.MIO10_SPI1_MISO"
#set_property PACKAGE_PIN W2   [get_ports {MIO11_SPI1_MOSI         }];  # "W2.MIO11_SPI1_MOSI"# microSD Card
#set_property PACKAGE_PIN W3   [get_ports {MIO13_SD0_DAT0_R        }];  # "W3.MIO13_SD0_DAT0_R"
#set_property PACKAGE_PIN W5   [get_ports {MIO14_SD0_DAT1_R        }];  # "W5.MIO14_SD0_DAT1_R"
#set_property PACKAGE_PIN Y4   [get_ports {MIO15_SD0_DAT2_R        }];  # "Y4.MIO15_SD0_DAT2_R"
#set_property PACKAGE_PIN Y3   [get_ports {MIO16_SD0_DAT3_R        }];  # "Y3.MIO16_SD0_DAT3_R"
#set_property PACKAGE_PIN W6   [get_ports {MIO21_SD0_CMD_R         }];  # "W6.MIO21_SD0_CMD_R"
#set_property PACKAGE_PIN AA6  [get_ports {MIO22_SD0_CLK_R         }];  # "AA6.MIO22_SD0_CLK_R"
#set_property PACKAGE_PIN AB6  [get_ports {MIO24_SD0_DETECT        }];  # "AB6.MIO24_SD0_DETECT"# User LEDs
#set_property PACKAGE_PIN AA3  [get_ports {MIO17_PS_LED3           }];  # "AA3.MIO17_PS_LED3"
#set_property PACKAGE_PIN Y5   [get_ports {MIO18_PS_LED2           }];  # "Y5.MIO18_PS_LED2"
#set_property PACKAGE_PIN AA4  [get_ports {MIO19_PS_LED1           }];  # "AA4.MIO19_PS_LED1"
#set_property PACKAGE_PIN AB4  [get_ports {MIO20_PS_LED0           }];  # "AB4.MIO20_PS_LED0"# User Push Button
#set_property PACKAGE_PIN AB5  [get_ports {MIO23_GPIO_PB           }];  # "AB5.MIO23_GPIO_PB"# USB
#set_property PACKAGE_PIN Y6   [get_ports {MIO25_VBUS_DET          }];  # "Y6.MIO25_VBUS_DET"
#set_property PACKAGE_PIN G14  [get_ports {MIO52_USB0_CLK          }];  # "G14.MIO52_USB0_CLK"
#set_property PACKAGE_PIN F14  [get_ports {MIO53_USB0_DIR          }];  # "F14.MIO53_USB0_DIR"
#set_property PACKAGE_PIN G15  [get_ports {MIO54_USB0_DATA2        }];  # "G15.MIO54_USB0_DATA2"
#set_property PACKAGE_PIN C14  [get_ports {MIO55_USB0_NXT          }];  # "C14.MIO55_USB0_NXT"
#set_property PACKAGE_PIN E14  [get_ports {MIO56_USB0_DATA0        }];  # "E14.MIO56_USB0_DATA0"
#set_property PACKAGE_PIN B14  [get_ports {MIO57_USB0_DATA1        }];  # "B14.MIO57_USB0_DATA1"
#set_property PACKAGE_PIN A14  [get_ports {MIO58_USB0_STP          }];  # "A14.MIO58_USB0_STP"
#set_property PACKAGE_PIN E15  [get_ports {MIO59_USB0_DATA3        }];  # "E15.MIO59_USB0_DATA3"
#set_property PACKAGE_PIN D15  [get_ports {MIO60_USB0_DATA4        }];  # "D15.MIO60_USB0_DATA4"
#set_property PACKAGE_PIN G16  [get_ports {MIO61_USB0_DATA5        }];  # "G16.MIO61_USB0_DATA5"
#set_property PACKAGE_PIN C15  [get_ports {MIO62_USB0_DATA6        }];  # "C15.MIO62_USB0_DATA6"
#set_property PACKAGE_PIN F16  [get_ports {MIO63_USB0_DATA7        }];  # "F16.MIO63_USB0_DATA7"
#set_property PACKAGE_PIN E16  [get_ports {MIO64_USB1_CLK          }];  # "E16.MIO64_USB1_CLK"
#set_property PACKAGE_PIN B15  [get_ports {MIO65_USB1_DIR          }];  # "B15.MIO65_USB1_DIR"
#set_property PACKAGE_PIN D16  [get_ports {MIO66_USB1_DATA2        }];  # "D16.MIO66_USB1_DATA2"
#set_property PACKAGE_PIN G17  [get_ports {MIO67_USB1_NXT          }];  # "G17.MIO67_USB1_NXT"
#set_property PACKAGE_PIN B16  [get_ports {MIO68_USB1_DATA0        }];  # "B16.MIO68_USB1_DATA0"
#set_property PACKAGE_PIN A16  [get_ports {MIO69_USB1_DATA1        }];  # "A16.MIO69_USB1_DATA1"
#set_property PACKAGE_PIN A17  [get_ports {MIO70_USB1_STP          }];  # "A17.MIO70_USB1_STP"
#set_property PACKAGE_PIN F17  [get_ports {MIO71_USB1_DATA3        }];  # "F17.MIO71_USB1_DATA3"
#set_property PACKAGE_PIN C17  [get_ports {MIO72_USB1_DATA4        }];  # "C17.MIO72_USB1_DATA4"
#set_property PACKAGE_PIN D17  [get_ports {MIO73_USB1_DATA5        }];  # "D17.MIO73_USB1_DATA5"
#set_property PACKAGE_PIN D18  [get_ports {MIO74_USB1_DATA6        }];  # "D18.MIO74_USB1_DATA6"
#set_property PACKAGE_PIN B17  [get_ports {MIO75_USB1_DATA7        }];  # "B17.MIO75_USB1_DATA7"# Power control
#set_property PACKAGE_PIN G9   [get_ports {MIO26_POWER_INT_B       }];  # "G9.MIO26_POWER_INT_B"
#set_property PACKAGE_PIN F12  [get_ports {MIO32_PS_FP_PWR_EN      }];  # "F12.MIO32_PS_FP_PWR_EN"
#set_property PACKAGE_PIN E9   [get_ports {MIO33_PL_PWR_EN         }];  # "E9.MIO33_PL_PWR_EN"
#set_property PACKAGE_PIN F13  [get_ports {MIO34_POWER_KILL_B      }];  # "F13.MIO34_POWER_KILL_B"# Display Port
#set_property PACKAGE_PIN G11  [get_ports {MIO27_DP_AUX_OUT        }];  # "G11.MIO27_DP_AUX_OUT"
#set_property PACKAGE_PIN G12  [get_ports {MIO28_DP_HPD            }];  # "G12.MIO28_DP_HPD"
#set_property PACKAGE_PIN F9   [get_ports {MIO29_DP_OE             }];  # "F9.MIO29_DP_OE"
#set_property PACKAGE_PIN G10  [get_ports {MIO30_DP_AUX_IN         }];  # "G10.MIO30_DP_AUX_IN"# PMBUS
#set_property PACKAGE_PIN F11  [get_ports {MIO31_INA226_PMBUS_ALERT}];  # "F11.MIO31_INA226_PMBUS_ALERT"# Low-speed expansion connector
#set_property PACKAGE_PIN D10  [get_ports {MIO36_PS_GPIO1_0        }];  # "D10.MIO36_PS_GPIO1_0"
#set_property PACKAGE_PIN E11  [get_ports {MIO37_PS_GPIO1_1        }];  # "E11.MIO37_PS_GPIO1_1"
#set_property PACKAGE_PIN C10  [get_ports {MIO39_PS_GPIO1_2        }];  # "C10.MIO39_PS_GPIO1_2"
#set_property PACKAGE_PIN D11  [get_ports {MIO40_PS_GPIO1_3        }];  # "D11.MIO40_PS_GPIO1_3"
#set_property PACKAGE_PIN B11  [get_ports {MIO44_PS_GPIO1_4        }];  # "B11.MIO44_PS_GPIO1_4"
#set_property PACKAGE_PIN A11  [get_ports {MIO45_PS_GPIO1_5        }];  # "A11.MIO45_PS_GPIO1_5"
#set_property PACKAGE_PIN C9   [get_ports {MIO38_SPI0_SCLK         }];  # "C9.MIO38_SPI0_SCLK"
#set_property PACKAGE_PIN B10  [get_ports {MIO41_SPI0_CS           }];  # "B10.MIO41_SPI0_CS"
#set_property PACKAGE_PIN D12  [get_ports {MIO42_SPI0_MISO         }];  # "D12.MIO42_SPI0_MISO"
#set_property PACKAGE_PIN E13  [get_ports {MIO43_SPI0_MOSI         }];  # "E13.MIO43_SPI0_MOSI"# Wi-Fi
#set_property PACKAGE_PIN V4   [get_ports {MIO7_WLAN_EN            }];  # "V4.MIO7_WLAN_EN"
#set_property PACKAGE_PIN C12  [get_ports {MIO46_SD1_D0            }];  # "C12.MIO46_SD1_D0"
#set_property PACKAGE_PIN B12  [get_ports {MIO47_SD1_D1            }];  # "B12.MIO47_SD1_D1"
#set_property PACKAGE_PIN A12  [get_ports {MIO48_SD1_D2            }];  # "A12.MIO48_SD1_D2"
#set_property PACKAGE_PIN D13  [get_ports {MIO49_SD1_D3            }];  # "D13.MIO49_SD1_D3"
#set_property PACKAGE_PIN A13  [get_ports {MIO50_SD1_CMD           }];  # "A13.MIO50_SD1_CMD"
#set_property PACKAGE_PIN C13  [get_ports {MIO51_SD1_CLK           }];  # "C13.MIO51_SD1_CLK"
#set_property PACKAGE_PIN F18  [get_ports {MIO76_WLAN_IRQ          }];  # "F18.MIO76_WLAN_IRQ"#LPDDR4
#set_property PACKAGE_PIN AA22 [get_ports {PS_DDR_CAA0             }];  # "AA22.PS_DDR_CAA0"
#set_property PACKAGE_PIN AB20 [get_ports {PS_DDR_CAA1             }];  # "AB20.PS_DDR_CAA1"
#set_property PACKAGE_PIN AB17 [get_ports {PS_DDR_CAA2             }];  # "AB17.PS_DDR_CAA2"
#set_property PACKAGE_PIN AB19 [get_ports {PS_DDR_CAA3             }];  # "AB19.PS_DDR_CAA3"
#set_property PACKAGE_PIN AB21 [get_ports {PS_DDR_CAA4             }];  # "AB21.PS_DDR_CAA4"
#set_property PACKAGE_PIN AB16 [get_ports {PS_DDR_CAA5             }];  # "AB16.PS_DDR_CAA5"
#set_property PACKAGE_PIN Y21  [get_ports {PS_DDR_CAB0             }];  # "Y21.PS_DDR_CAB0"
#set_property PACKAGE_PIN AA21 [get_ports {PS_DDR_CAB1             }];  # "AA21.PS_DDR_CAB1"
#set_property PACKAGE_PIN AA18 [get_ports {PS_DDR_CAB2             }];  # "AA18.PS_DDR_CAB2"
#set_property PACKAGE_PIN AA19 [get_ports {PS_DDR_CAB3             }];  # "AA19.PS_DDR_CAB3"
#set_property PACKAGE_PIN AA17 [get_ports {PS_DDR_CAB4             }];  # "AA17.PS_DDR_CAB4"
#set_property PACKAGE_PIN AA16 [get_ports {PS_DDR_CAB5             }];  # "AA16.PS_DDR_CAB5"
#set_property PACKAGE_PIN W20  [get_ports {PS_DDR_CKA_C            }];  # "W20.PS_DDR_CKA_C"
#set_property PACKAGE_PIN V20  [get_ports {PS_DDR_CKA_T            }];  # "V20.PS_DDR_CKA_T"
#set_property PACKAGE_PIN V19  [get_ports {PS_DDR_CKB_C            }];  # "V19.PS_DDR_CKB_C"
#set_property PACKAGE_PIN V18  [get_ports {PS_DDR_CKB_T            }];  # "V18.PS_DDR_CKB_T"
#set_property PACKAGE_PIN U22  [get_ports {PS_DDR_CKE0             }];  # "U22.PS_DDR_CKE0"
#set_property PACKAGE_PIN U21  [get_ports {PS_DDR_CKE1             }];  # "U21.PS_DDR_CKE1"
#set_property PACKAGE_PIN V22  [get_ports {PS_DDR_CS0_N            }];  # "V22.PS_DDR_CS0_N"
#set_property PACKAGE_PIN U20  [get_ports {PS_DDR_CS1_N            }];  # "U20.PS_DDR_CS1_N"
#set_property PACKAGE_PIN AB9  [get_ports {PS_DDR_DMA0             }];  # "AB9.PS_DDR_DMA0"
#set_property PACKAGE_PIN AB14 [get_ports {PS_DDR_DMA1             }];  # "AB14.PS_DDR_DMA1"
#set_property PACKAGE_PIN U9   [get_ports {PS_DDR_DMB0             }];  # "U9.PS_DDR_DMB0"
#set_property PACKAGE_PIN W13  [get_ports {PS_DDR_DMB1             }];  # "W13.PS_DDR_DMB1"
#set_property PACKAGE_PIN AB11 [get_ports {PS_DDR_DQ0              }];  # "AB11.PS_DDR_DQ0"
#set_property PACKAGE_PIN Y10  [get_ports {PS_DDR_DQ1              }];  # "Y10.PS_DDR_DQ1"
#set_property PACKAGE_PIN AB10 [get_ports {PS_DDR_DQ2              }];  # "AB10.PS_DDR_DQ2"
#set_property PACKAGE_PIN W10  [get_ports {PS_DDR_DQ3              }];  # "W10.PS_DDR_DQ3"
#set_property PACKAGE_PIN AA8  [get_ports {PS_DDR_DQ4              }];  # "AA8.PS_DDR_DQ4"
#set_property PACKAGE_PIN Y8   [get_ports {PS_DDR_DQ5              }];  # "Y8.PS_DDR_DQ5"
#set_property PACKAGE_PIN AB7  [get_ports {PS_DDR_DQ6              }];  # "AB7.PS_DDR_DQ6"
#set_property PACKAGE_PIN AA7  [get_ports {PS_DDR_DQ7              }];  # "AA7.PS_DDR_DQ7"
#set_property PACKAGE_PIN AA11 [get_ports {PS_DDR_DQ8              }];  # "AA11.PS_DDR_DQ8"
#set_property PACKAGE_PIN Y11  [get_ports {PS_DDR_DQ9              }];  # "Y11.PS_DDR_DQ9"
#set_property PACKAGE_PIN AA12 [get_ports {PS_DDR_DQ10             }];  # "AA12.PS_DDR_DQ10"
#set_property PACKAGE_PIN AB12 [get_ports {PS_DDR_DQ11             }];  # "AB12.PS_DDR_DQ11"
#set_property PACKAGE_PIN Y14  [get_ports {PS_DDR_DQ12             }];  # "Y14.PS_DDR_DQ12"
#set_property PACKAGE_PIN AA14 [get_ports {PS_DDR_DQ13             }];  # "AA14.PS_DDR_DQ13"
#set_property PACKAGE_PIN Y15  [get_ports {PS_DDR_DQ14             }];  # "Y15.PS_DDR_DQ14"
#set_property PACKAGE_PIN AB15 [get_ports {PS_DDR_DQ15             }];  # "AB15.PS_DDR_DQ15"
#set_property PACKAGE_PIN W8   [get_ports {PS_DDR_DQ16             }];  # "W8.PS_DDR_DQ16"
#set_property PACKAGE_PIN W7   [get_ports {PS_DDR_DQ17             }];  # "W7.PS_DDR_DQ17"
#set_property PACKAGE_PIN V7   [get_ports {PS_DDR_DQ18             }];  # "V7.PS_DDR_DQ18"
#set_property PACKAGE_PIN V10  [get_ports {PS_DDR_DQ19             }];  # "V10.PS_DDR_DQ19"
#set_property PACKAGE_PIN U7   [get_ports {PS_DDR_DQ20             }];  # "U7.PS_DDR_DQ20"
#set_property PACKAGE_PIN T9   [get_ports {PS_DDR_DQ21             }];  # "T9.PS_DDR_DQ21"
#set_property PACKAGE_PIN U10  [get_ports {PS_DDR_DQ22             }];  # "U10.PS_DDR_DQ22"
#set_property PACKAGE_PIN T10  [get_ports {PS_DDR_DQ23             }];  # "T10.PS_DDR_DQ23"
#set_property PACKAGE_PIN U11  [get_ports {PS_DDR_DQ24             }];  # "U11.PS_DDR_DQ24"
#set_property PACKAGE_PIN U12  [get_ports {PS_DDR_DQ25             }];  # "U12.PS_DDR_DQ25"
#set_property PACKAGE_PIN W12  [get_ports {PS_DDR_DQ26             }];  # "W12.PS_DDR_DQ26"
#set_property PACKAGE_PIN W11  [get_ports {PS_DDR_DQ27             }];  # "W11.PS_DDR_DQ27"
#set_property PACKAGE_PIN V14  [get_ports {PS_DDR_DQ28             }];  # "V14.PS_DDR_DQ28"
#set_property PACKAGE_PIN U14  [get_ports {PS_DDR_DQ29             }];  # "U14.PS_DDR_DQ29"
#set_property PACKAGE_PIN W15  [get_ports {PS_DDR_DQ30             }];  # "W15.PS_DDR_DQ30"
#set_property PACKAGE_PIN V15  [get_ports {PS_DDR_DQ31             }];  # "V15.PS_DDR_DQ31"
#set_property PACKAGE_PIN AA9  [get_ports {PS_DDR_DQSA0_C          }];  # "AA9.PS_DDR_DQSA0_C"
#set_property PACKAGE_PIN Y9   [get_ports {PS_DDR_DQSA0_T          }];  # "Y9.PS_DDR_DQSA0_T"
#set_property PACKAGE_PIN AA13 [get_ports {PS_DDR_DQSA1_C          }];  # "AA13.PS_DDR_DQSA1_C"
#set_property PACKAGE_PIN Y13  [get_ports {PS_DDR_DQSA1_T          }];  # "Y13.PS_DDR_DQSA1_T"
#set_property PACKAGE_PIN V8   [get_ports {PS_DDR_DQSB0_C          }];  # "V8.PS_DDR_DQSB0_C"
#set_property PACKAGE_PIN V9   [get_ports {PS_DDR_DQSB0_T          }];  # "V9.PS_DDR_DQSB0_T"
#set_property PACKAGE_PIN V13  [get_ports {PS_DDR_DQSB1_C          }];  # "V13.PS_DDR_DQSB1_C"
#set_property PACKAGE_PIN V12  [get_ports {PS_DDR_DQSB1_T          }];  # "V12.PS_DDR_DQSB1_T"
#set_property PACKAGE_PIN T18  [get_ports {PS_DDR_RST_B            }];  # "T18.PS_DDR_RST_B"
#set_property PACKAGE_PIN T19  [get_ports {LPDDR4_PS_ZQ            }];  # "T19.LPDDR4_PS_ZQ"# PS status
#set_property PACKAGE_PIN K16  [get_ports {PS_ERROR_OUT            }];  # "K16.PS_ERROR_OUT"
#set_property PACKAGE_PIN K18  [get_ports {PS_ERROR_STATUS         }];  # "K18.PS_ERROR_STATUS"
#set_property PACKAGE_PIN K15  [get_ports {PS_INIT_B               }];  # "K15.PS_INIT_B"# ----------------------------------------------------------------------------
# USB Transceiver -- 26 MHz clock
# ----------------------------------------------------------------------------
# Bank 505
#set_property PACKAGE_PIN L20  [get_ports {GTR_CLK0_USB_26M_C_N    }];  # "L20.GTR_CLK0_USB_26M_C_N"
#set_property PACKAGE_PIN L19  [get_ports {GTR_CLK0_USB_26M_C_P    }];  # "L19.GTR_CLK0_USB_26M_C_P"
#set_property PACKAGE_PIN D22  [get_ports {GTR_LANE2_RX_N          }];  # "D22.GTR_LANE2_RX_N"
#set_property PACKAGE_PIN D21  [get_ports {GTR_LANE2_RX_P          }];  # "D21.GTR_LANE2_RX_P"
#set_property PACKAGE_PIN C20  [get_ports {GTR_LANE2_TX_N          }];  # "C20.GTR_LANE2_TX_N"
#set_property PACKAGE_PIN C19  [get_ports {GTR_LANE2_TX_P          }];  # "C19.GTR_LANE2_TX_P"
#set_property PACKAGE_PIN B22  [get_ports {GTR_LANE3_RX_N          }];  # "B22.GTR_LANE3_RX_N"
#set_property PACKAGE_PIN B21  [get_ports {GTR_LANE3_RX_P          }];  # "B21.GTR_LANE3_RX_P"
#set_property PACKAGE_PIN A20  [get_ports {GTR_LANE3_TX_N          }];  # "A20.GTR_LANE3_TX_N"
#set_property PACKAGE_PIN A19  [get_ports {GTR_LANE3_TX_P          }];  # "A19.GTR_LANE3_TX_P"# ----------------------------------------------------------------------------
# Display Port -- 27 MHz clock
# ----------------------------------------------------------------------------
# Bank 505
#set_property PACKAGE_PIN J20  [get_ports {GTR_CLK1_DP_27M_C_N     }];  # "J20.GTR_CLK1_DP_27M_C_N"
#set_property PACKAGE_PIN J19  [get_ports {GTR_CLK1_DP_27M_C_P     }];  # "J19.GTR_CLK1_DP_27M_C_P"
#set_property PACKAGE_PIN K22  [get_ports {GTR_LANE0_TX_N          }];  # "K22.GTR_LANE0_TX_N"
#set_property PACKAGE_PIN K21  [get_ports {GTR_LANE0_TX_P          }];  # "K21.GTR_LANE0_TX_P"
#set_property PACKAGE_PIN F22  [get_ports {GTR_LANE1_TX_N          }];  # "F22.GTR_LANE1_TX_N"
#set_property PACKAGE_PIN F21  [get_ports {GTR_LANE1_TX_P          }];  # "F21.GTR_LANE1_TX_P"
#set_property PACKAGE_PIN D22  [get_ports {GTR_LANE2_RX_N          }];  # "D22.GTR_LANE2_RX_N"
#set_property PACKAGE_PIN D21  [get_ports {GTR_LANE2_RX_P          }];  # "D21.GTR_LANE2_RX_P"
#set_property PACKAGE_PIN C20  [get_ports {GTR_LANE2_TX_N          }];  # "C20.GTR_LANE2_TX_N"
#set_property PACKAGE_PIN C19  [get_ports {GTR_LANE2_TX_P          }];  # "C19.GTR_LANE2_TX_P"
#set_property PACKAGE_PIN B22  [get_ports {GTR_LANE3_RX_N          }];  # "B22.GTR_LANE3_RX_N"
#set_property PACKAGE_PIN B21  [get_ports {GTR_LANE3_RX_P          }];  # "B21.GTR_LANE3_RX_P"
#set_property PACKAGE_PIN A20  [get_ports {GTR_LANE3_TX_N          }];  # "A20.GTR_LANE3_TX_N"
#set_property PACKAGE_PIN A19  [get_ports {GTR_LANE3_TX_P          }];  # "A19.GTR_LANE3_TX_P"# ----------------------------------------------------------------------------
# PMIC Interrupt Request
# ----------------------------------------------------------------------------
# Bank 502
#set_property PACKAGE_PIN B18  [get_ports {PMIC_IRQ                }];  # "B18.PMIC_IRQ"

4.Demo的使用

通过miniDP口连接显示器，插上SD卡，板子设置成SD卡启动，上电启动就可看到Ultra96默认界面

Ultra96基础学习篇——（2）Ultra96初体验相关推荐

  1. Ultra96基础学习篇——（3）Ultra96教程01—04

    开发板:Ultra96 Xilinx Vivado:2018.2 SDK:2018.2 学习Ultra96,在http://zedboard.org/support/design/24166/156可 ...

  2. Ultra96基础学习篇——（1）Ultra96开发板及资料获取

    项目需要,手里多了一块Ultra96的开发板,查找资料不多.学习了一段时间,现在整理一下,以便回顾学习. 1.关于Ultra96开发板 Ultra96板子是AVNET开发的,看价格也是比较便宜的.是基 ...

  3. 鸟哥的Linux私房菜基础学习篇 第0章与第1章的重点探索

    鸟哥的Linux私房菜基础学习篇 第0章与第1章的重点探索 目录 鸟哥的Linux私房菜基础学习篇 第0章与第1章的重点探索 前言 一.计算机概论 1.知识基础 2.知识初阶 3.知识进阶 二.Lin ...

  4. QT界面开发--基础学习篇一（上）

    一.Qt简单介绍: 1.QT的简单理解: Qt简单的说就是一种可以跨平台的编程语言工具,可以直接类比C语言和C++. 且一般QT的代码逻辑也是以C语言和C++(也可以适用于像JS的语言),可以直观理解 ...

  5. 拒绝从入门到放弃_《鸟哥的 Linux 私房菜 — 基础学习篇(第三版)》必读目录

    目录 目录 前言 关于这本书 必看知识点 最后 前言 相信部分刚进入这个行业的新同学会对一个问题感到疑惑,为什么从培训学校出来的学员不被欢迎? 这里记录下一些我个人的看法(博主也曾有面试新员工的经历) ...

  6. python基础代码的含义_Python基础学习篇

    原标题:Python基础学习篇 1.编码 默认情况下,Python 3 源码文件以 UTF-8 编码,所有字符串都是unicode 字符串. 当然你也可以为源码文件指定不同的编码:# -*- codi ...

  7. PyTorch学习笔记：PyTorch初体验

    PyTorch学习笔记:PyTorch初体验 一.在Anaconda里安装PyTorch 1.进入虚拟环境mlcc 2.安装PyTorch 二.在PyTorch创建张量 1.启动mlcc环境下的Spy ...

  8. Python学习笔记：pandas初体验

    Python学习笔记:pandas初体验 一.安装pandas模块 1.安装Python3.7 注意:必须勾选pip(python install package). 2.配置环境变量 3.下载 pa ...

  9. 鸟哥的linux私房菜-基础学习篇 读书笔记

    从事linux工作一年多,算是能够熟练运用linux服务器,但仍觉得自己对Linux的原理,理论缺乏空洞,潜下心来认真阅读尘封的鸟哥经典,知识点很全,收获颇多,实践与知识结合,知行合一,对linux开 ...

最新文章

  1. Android RecycleView ScrollBy不生效
  2. 模拟电路技术之基础知识（一）
  3. WireConnection 最小生成树，prim 第九届“图灵杯”NEUQ-ACM程序设计竞赛个人赛
  4. dataset__getitem___[PyTorch 学习笔记] 2.1 DataLoader 与 DataSet
  5. mysql php 迁移_MySQL数据复制、迁移、转换
  6. 命令父窗口变颜色_【编程】第五期：Python Tkinter图形化教程03布局之父窗口、pack和LabelFrame...
  7. mybatis如何处理参数
  8. c语言 graph,基于图（graph）的应用举例
  9. TCP/IP-链路层
  10. 质量工程师（QA）岗位初介绍
  11. stata14中文乱码问题
  12. 对select标签中的option默认选中后端的数据
  13. android解析xml nbsp报错,Android Studio 3 AndroidManifest.xml报错error: unknown eleme
  14. dxlary 解决AutoCad2006致命错误unhandled access violation reading 0x0000 exception at 6532b0h。
  15. matlab 周期卷积,matlab连续时间信号卷积和离散时间信号卷积程序
  16. M1 mac外接显示器休眠后又失败
  17. js的window.print打印页面 不打印网页中的“打印”按钮
  18. idea modules中Sources介绍
  19. 全新UI运营级在线客服系统源码+无授权/带教程
  20. 【CS231n】十五、深度学习的高效算法和硬件设计_一只神秘的大金毛_新浪博客...

热门文章

  1. Charles青花瓷 解锁https
  2. 资产-服务器变更流程图
  3. 【读百本英文书计划】怎么选读第一本英文书？
  4. 單子の错题：集训错题整理
  5. python爬虫获取并购重组数据
  6. 汽车轮胎，补一下常识
  7. saxon-he报错
  8. 【单片机笔记】上海移远公司NB-IOT模组 BC26 使用STM32 AT命令实现连接阿里云数据上传和下载
  9. 新乡学院二批计算机类分数线,新乡学院2020年录取分数线（附2017-2020年分数线）...
  10. SDP 情绪算法丨场景品牌的角逐，上瘾算法的较量