最近在审一篇英文稿,第一次做这个工作,还有点不知如何表达。幸亏遇上我的处女审稿,我想不会枪毙它的,给他一个major revision后接收吧。呵呵

网上找来一些零碎的资料参考参考。

+++++++++++++++++++++++++++++++

1、目标和结果不清晰。

It is noted that your manuscript needs careful editing by someone with expertise in technical English editing paying particular attention to English grammar, spelling, and sentence structure so that the goals and results of the study are clear to the reader.

2、未解释研究方法或解释不充分。

In general, there is a lack of explanation of replicates and statistical methods used in the study.

Furthermore, an explanation of why the authors did these various experiments should be provided.

3、对于研究设计的rationale:

Also, there are few explanations of the rationale for the study design.

4、夸张地陈述结论/夸大成果/不严谨:

The conclusions are overstated. For example, the study did not show

if the side effects from initial copper burst can be avoid with the polymer formulation.

5、对hypothesis的清晰界定:

A hypothesis needs to be presented。

6、对某个概念或工具使用的rationale/定义概念:

What was the rationale for the film/SBF volume ratio?

7、对研究问题的定义:

Try to set the problem discussed in this paper in more clear,

write one section to define the problem

8、如何凸现原创性以及如何充分地写literature review:

The topic is novel but the application proposed is not so novel.

9、对claim,如A>B的证明,verification:

There is no experimental comparison of the algorithm with previously known work, so it is impossible to judge whether the algorithm is an improvement on previous work.

10、严谨度问题:

MNQ is easier than the primitive PNQS, how to prove that.

11、格式(重视程度):

In addition, the list of references is not in our style. It is close but not completely correct. I have attached a pdf file with "Instructions for Authors" which shows examples.

Before submitting a revision be sure that your material is properly prepared and formatted. If you are unsure, please consult the formatting nstructions to authors that are given under the "Instructions and Forms" button in he upper right-hand corner of the screen.

12、语言问题(出现最多的问题):

有关语言的审稿人意见:

It is noted that your manuscript needs careful editing by someone with expertise in technical English editing paying particular attention to English grammar, spelling, and sentence structure so that the goals and results of the study are clear to the reader.

The authors must have their work reviewed by a proper translation/reviewing service before submission; only then can a proper review be performed. Most sentences contain grammatical and/or spelling mistakes or are not complete sentences.

As presented, the writing is not acceptable for the journal. There are problems with sentence structure, verb tense, and clause construction.

The English of your manuscript must be improved before resubmission. We strongly suggest that you obtain assistance from a colleague who is well-versed in English or whose native language is English.

Please have someone competent in the English language and the subject matter of your paper go over the paper and correct it ?

the quality of English needs improving.

作为审稿人,本不应该把编辑部的这些信息公开(冒风险啊),

但我觉得有些意见值得广大投稿人注意,

就贴出来吧,当然,有关审稿人的名字,Email,文章题名信息等就都删除了,

以免造成不必要的麻烦!

希望朋友们多评价,其他有经验的审稿人能常来指点大家!

国人一篇文章投Mater.类知名国际杂志,

被塞尔维亚一审稿人打25分!

个人认为文章还是有一些创新的,

所以作为审稿人我就给了66分,(这个分正常应该足以发表),提了一些修改意见,望作者修改后发表!

登录到编辑部网页一看,一个文章竟然有六个审稿人,

详细看了下打的分数,60分大修,60分小修,66分(我),25分拒,(好家伙,竟然打25分,有魄力),拒但没有打分(另一国人审),最后一个没有回来!

两个拒的是需要我们反思和学习的!

(括号斜体内容为我注解)

Reviewer 4

Reviewer Recommendation Term: Reject

Overall Reviewer Manuscript Rating: 25

Comments to Editor: Reviewers are required to enter their name, affiliation and e-mail address below. Please note this is for administrative purposes and will not be seen by the author.

Title (Prof./Dr./Mr./Mrs.): Prof.

Name: XXX

Affiliation: XXXXXXXXXXXXXXXXXXXXXXXXXXx

Manuscript entitled "Synthesis XXX。。。。。。。。。。。" it has been synthesized with a number of different methods and in a variety of forms. This manuscript does not bring any new knowledge or data on materials property and therefore only contribution may be in novel preparation method, still this point is not elaborated properly (see Remark 1). Presentation and writing is rather poor; there are several statements not supported with data (for some see Remarks 2) and even some flaws (see Remark 3). For these reasons I suggest to reject paper in the present form.

1. The paper describes a new method for preparation of XXXX, but:

- the new method has to be compared with other methods for preparation of XXXXpowders (INTRODUCTION - literature data, RESULTS AND DISCUSSION - discussion),(通常的写作格式,审稿人实际上很在意的)

- it has to be described why this method is better or different from other methods, (INTRODUCTION - literature data, RESULTS AND DISCUSSION - discussion),

- it has to be added in the manuscript what kind of XXXXXX by other methods compared to this novel one (INTRODUCTION - literature data, RESULTS AND DISCUSSION - discussion),

- it has to be outlined what is the benefit of this method (ABSTRACT, RESULTS AND DISCUSSION, CONCLUSIONS).

(很多人不会写这个地方,大家多学习啊)

2. When discussing XRD data XXXauthors

- state that XXXXX

- state that XXXX

- This usually happens with increasing sintering time, but are there any data to present, density, particle size?

(很多人用XRD,结果图放上去就什么都不管了,这是不应该的)

3. When discussing luminescence measurements authors write "XXXXXIf there is second harmonic in excitation beam it will stay there no matter what type of material one investigates!!!

(研究了什么???)

4.英语写作要提高

(这条很多人的软肋,大家努力啊)

Reviewer 5

Reviewer Recommendation Term: Reject

Overall Reviewer Manuscript Rating: N/A

Comments to Editor:

Title (Prof./Dr./Mr./Mrs.)rof.

Name:(国人)

Affiliation: XXXXXXXXxxxxXXXXXXXXXXXXXxxxx

Dear editor:

Thank you for inviting me to evaluate the article titled "XXXX“. In this paper, the authors investigated the influences of sintering condition on the crystal structure and XXXXXX, However, it is difficult for us to understand the manuscript because of poor English being used.

The text is not well arranged and the logic is not clear. Except English writing, there are many mistakes in the manuscript and the experimental results don't show good and new results. So I recommend to you that this manuscript can not be accepted. The following are the questions and some mistakes in this manuscript:

(看看总体评价,不达标,很多人被这样郁闷了,当然审稿人也有他的道理)

1. TheXXXXXXX. However, this kind material had been investigated since 1997 as mentioned in the author's manuscript, and similar works had been published in similar journals. What are the novel findings in the present work? The synthesis method and luminescence properties reported in this manuscript didn't supply enough evidence to support the prime novelty statement.

(这位作者好猛,竟然翻出自己1997年的中文文章翻译了一边就敢投国际知名杂志,而且没有新的创新!

朋友们也看到了,一稿多发,中文,英文双版发表在网络时代太难了,运气不好审稿人也是国人,敢情曾经看过你的文章,所以必死无疑,这位作者老兄就命运差了,刚好被审稿人看见,所以毫无疑问被拒,(呵呵,我97年刚上初一没见到这个文章,哈哈))

2. In page 5, the author mentioned that: "XXXX Based on our knowledge, "sintering" describes the process when the powders become ceramics. So, I think the word "synthesis" should be better instead of "sintering" here. Second, the XRD patterns didn't show obvious difference between three "sintering" temperatures of 700, 800 and 900 ?C.

(作者老兄做工作太不仔细了,虫子们可别犯啊)

3. Also in the page X, the author mentioned that: XXX。。。。。。。。。。 However, the author didn't supply the morphologies of particles at different synthesizing temperatures. What are the experimental results or the references which support the author's conclusion that the XXXX properties would be influenced by the particle size?

(作者仍在瞎说,这个问题我也指出了,不光我还是看着国人的份上让修改,添加很多东西,说实话,文章看的很累很累)

4. XXXXXXXXXXXXXXX However, to my knowledge, after the milling, the particles size will be decreased exactly, but how and what to destroy the host structure?

(虫子们自己注意)

5. XXX on the vertical axis of the XRD patterns was meaningless, because author add several patterns in one figure. It is obvious that these spectra are not measured by ordinary methods. (都是老问题,不说了)

以下12点无轻重主次之分。每一点内容由总结性标题和代表性审稿人意见构成。

1、目标和结果不清晰。

It is noted that your manuscript needs careful editing by someone with expertise in technical English editing paying particular attention to English grammar, spelling, and sentence structure so that the goals and results of the study are clear to the reader.

2、未解释研究方法或解释不充分。

◆ In general, there is a lack of explanation of replicates and statistical me

thods used in the study.

◆ Furthermore, an explanation of why the authors did these various experiments

should be provided.

3、对于研究设计的rationale:

Also, there are few explanations of the rationale for the study design.

4、夸张地陈述结论/夸大成果/不严谨:

The conclusions are overstated.  For example, the study did not show

if the side effects from initial copper burst can be avoid with the polymer formulation.

5、对hypothesis的清晰界定:

A hypothesis needs to be presented。

6、对某个概念或工具使用的rationale/定义概念:

What was the rationale for the film/SBF volume ratio?

7、对研究问题的定义:

Try to set the problem discussed in this paper in more clear,

write one section to define the problem

8、如何凸现原创性以及如何充分地写literature review:

The  topic  is  novel  but  the  application  proposed  is  not  so  novel.

9、对claim,如A>B的证明,verification:

There is no experimental comparison of the algorithm with previously known work, so it is impossible to judge whether the algorithm is an improvement on previous work.

10、严谨度问题:

MNQ is easier than the primitive PNQS, how to prove that.

11、格式(重视程度):

◆ In addition, the list of references is not in our style. It is close but not completely correct. I have attached a pdf file with "Instructions for Authors" which shows examples.

◆ Before submitting a revision be sure that your material is properly prepared and formatted.  If you are unsure, please consult the formatting nstructions to authors that are given under the "Instructions and Forms" button in he upper right-hand corner of the screen.

12、语言问题(出现最多的问题):

有关语言的审稿人意见:

◆ It is noted that your manuscript needs careful editing by someone with expertise in technical English editing paying particular attention to English grammar, spelling, and sentence structure so that the goals and results of the study are clear to the reader.

◆ The authors must have their work reviewed by a proper translation/reviewing service before submission; only then can a proper review be performed. Most sentences contain grammatical and/or spelling mistakes or are not complete sentences.

◆ As presented, the writing is not acceptable for the journal.  There are pro

blems with sentence structure, verb tense, and clause construction.

◆ The English of your manuscript must be improved before resubmission. We str

ongly suggest that you obtain assistance from a colleague who is well-versed i

n English or whose native language is English.

◆ Please have someone competent in the English language and the subject matte

r of your paper go over the paper and correct it. ?

◆ the quality of English needs improving.

来自编辑的鼓励:

Encouragement from reviewers:

◆ I would be very glad to re-review the paper in greater depth once it has be

en edited because the subject is interesting.

◆ There is continued interest in your manuscript titled "……" which you subm

itted to the Journal of Biomedical Materials Research: Part B - Applied Biomat

erials.

◆ The Submission has been greatly improved and is worthy of publication.

英文论文评审意见_英文论文审稿意见模板相关推荐

  1. 计算机论文 游戏,计算机游戏论文3000字_计算机游戏毕业论文范文模板.doc

    计算机游戏论文3000字_计算机游戏毕业论文范文模板 计算机游戏论文3000字(一):一些智力游戏问题的数学模型及其计算机求解论文 摘要:国内只有相关智力游戏问题的数学模型相关论文,数学模型作为当代社 ...

  2. 计算机技术结业论文,计算机技术结业论文1900字_计算机技术结业毕业论文范文模板.doc...

    计算机技术结业论文1900字_计算机技术结业毕业论文范文模板 计算机技术结业论文1900字(一):基于计算机技术的水利工程管理信息化系统研究论文 水利工程管理是在水利工程开发的基础上从多方面.多角度进 ...

  3. 计算机与未来论文2000字,计算机未来论文2000字_计算机未来毕业论文范文模板.doc...

    计算机未来论文2000字_计算机未来毕业论文范文模板 计算机未来论文2000字(一):计算机图像处理技术的发展与未来 创新探索论文 摘要:文章简述了计算机图像识别技术的发展现状与展望,系统分析了计算机 ...

  4. 计算机3000字论文翻译,计算机翻译论文3000字_计算机翻译毕业论文范文模板.doc...

    计算机翻译论文3000字_计算机翻译毕业论文范文模板 计算机翻译论文3000字(一):基于语料库的计算机辅助翻译教学法探究论文 摘要近年来,语料库技术与翻译实践和翻译研究的结合欣欣向荣,但将语料库技术 ...

  5. 计算机老师德育论文,计算机德育论文2400字_计算机德育毕业论文范文模板.doc

    计算机德育论文2400字_计算机德育毕业论文范文模板 计算机德育论文2400字(一):浅析德育教育在技工院校计算机教学中的应用策略论文 摘要:新形势下德育教育已经在技校计算机教学当中扮演着十分重要的角 ...

  6. 计算机技术应用论文范文,计算机技术应用论文2400字_计算机技术应用毕业论文范文模板.doc...

    计算机技术应用论文2400字_计算机技术应用毕业论文范文模板 计算机技术应用论文2400字(一):浅谈计算机技术在 档案管理应用中的必要性论文 摘要在 档案管理中通过应用计算机技术,能够对各类档案资料 ...

  7. wps英文参考文献怎么对齐_wps英文参考文献怎么对齐_【论文攻略】排版技巧——如何用 Word 编辑参考文献......

    每个需要写毕业论文的朋友都会发现,修改文献是一件非常痛苦的事情,虽然现在也有很多软件可以编排参考文献,其实 word 本身就可以. 采用合适的编辑方法会方便地做到整齐,规范, 自动排序和交叉引用. 1 ...

  8. php食堂管理刷卡系统论文,食堂管理系统_毕业设计论文

    内容介绍 原文档由会员 intt 发布 食堂管理系统_毕业设计论文 目录如下: 一. 引言 2 1.1背景与目的 2 1.2后台数据库为SQL Server 2000简介 2 二. 系统需求分析 2 ...

  9. 如何高效回复审稿意见?(附常用审稿意见回复模板)

    在SCI论文投稿成功后,很多人跟小编一样,肯定会不定期登陆投稿系统查看稿件状态; 然而很多小伙伴也会经常询问小编,某个稿件状态到底是什么意思?首先在审稿意见回复之前,先和小编来看看一般SCI论文投稿状 ...

  10. 看不懂论文代码怎么办_学位论文中的公式排版(制表位+mathtype+域)

    写在前面 为什么把公式排版单独拉出来写一篇文章呢? 因为公式排版实在是太难了.公式居中+标号右对齐,简直反人类好么.在学校期间一直寻找方便的公式排版+自动编号方法,但搜索出来的大多只是用到了制表位,公 ...

最新文章

  1. JDBC第一篇之获得数据库连接
  2. golang 执行外部命令 超时处理 exec.CommandContext
  3. 神经网络模拟条件反射
  4. 跨境电商未来应该怎么走?
  5. php添加jpeg,PHP-如何将JPEG图像保存为渐进JPEG?
  6. VMware10出现VMware Workstation 不可恢复错误: (vmx)
  7. OpenCV中Mat属性step,size,step1,elemSize,elemSize1
  8. Pure公司发布机架规模FlashBlade对象与文件存储方案
  9. h264解码延迟优化_JEET Air Plus:延迟优化技术,让你游戏不掉线
  10. Zint生成二维码环境搭建
  11. centos:清理磁盘空间
  12. 【Unity破事水】如何实现线上试卷选择题的选项
  13. 深度学习方法的超分辨率(Super-resolution)方向论文【不定期更新】
  14. linux mint mac桌面图标,在Ubuntu、Linux Mint上安装Mac OS X主题
  15. PowerTool下载(“啥文件都能删,啥病毒都解决” 工具)
  16. 19.制作自动切换滚动的图片轮播
  17. 简述什么是图灵机_图灵机简介和原理分析
  18. SQL查询无限层级结构的所有下级,所有上级(即所有的子孙曾孙等等)
  19. 为什么普遍用Linux做服务器?
  20. 吃货联盟订餐系统Java代码

热门文章

  1. 如何让背景图片居中?
  2. OSChina 十一乱弹 —— 前女友 is Null
  3. kubuntu我显示服务器,kubuntu 开启ssh 与加速连接速度
  4. 干货 | 收藏贴!一文看懂静态资源服务沉浮及其在携程的演进
  5. Java 求解买卖股票的xx时机含手续费
  6. 《烈烈先秦》8、独撑大厦的真勇者——半残战神李牧
  7. 固定翼航模及四旋翼无人机基础
  8. Pixhawk学习9——固定翼位置控制(L1控制+TECS总能量控制)
  9. linux 编辑文件出现E45readonly option is set (add! to .....)
  10. Google究竟怎么扣税,如何结算?你想知道的都在这里了