[23]

唐庆菊, 刘元林, 梅晨, 等. 一种热障涂层结构模拟脱粘缺陷试件及其制备方法:CN106124270A[P]. 2016. TANG Q J, LIU Y L, MEI C, et al. A specimen of thermal barrier coating structure with simulated debonding defect and preparation method:CN106124270A[P]. 2016(in Chinese).

[24]

SHEPARD S M, LHOTA J R, RUBADEUX B A, et al. Reconstruction and enhancement of active thermographic image sequences[J]. Optical Engineering, 2003, 42(5):1337-1343.

[1]

PAWLOWSKI L. The science and engineering of thermal spray coatings[M]. 2nd ed. New York:John Wiley & Sons, 1994:401-407.

[25]

KOSHTI A M. Infrared contrast data analysis method for quantitative measurement and monitoring in flash infrared thermography[C]//Structural Health Monitoring and Inspection of Advanced Materials, Aerospace, and Civil Infrastructure 2015, 2015:94370.

[2]

刘纯波, 林锋, 蒋显亮. 热障涂层的研究现状与发展趋势[J]. 中国有色金属学报, 2007, 17(1):1-13. LIU C B, LIN F, JIANG X L. Current state and future development of thermal barrier coating[J]. The Chinese Journal of Nonferrous Metals, 2007, 17(1):1-13(in Chinese).

[3]

魏铮, 胡捷. 热障涂层失效机制和寿命预测研究概述[J]. 装备机械, 2013(4):2-6. WEI Z, HU J. Overview of research on failure mechanism and life prediction of thermal barrier coatings[J]. Equipment Machinery, 2013(4):2-6(in Chinese).

[4]

韩赞东, 李永杰, 陈以方. 陶瓷涂层结合质量的超声斜入射检测[J]. 清华大学学报(自然科学版), 2017, 57(5):454-458. HAN Z D, LI Y J, CHEN Y F. Oblique-incidence ultrasonic testing for the adhesion quality of ceramic coatings[J]. Journal of Tsinghua University (Science & Technology), 2017, 57(5):454-458(in Chinese).

[5]

LI Y, CHEN Z M, MAO Y, et al. Quantitative evaluation of thermal barrier coating based on eddy current technique[J]. NDT & E International, 2012, 50:29-35.

[6]

唐庆菊. SiC涂层缺陷的脉冲红外热波无损检测关键技术研究[D]. 哈尔滨:哈尔滨工业大学, 2014. TANG Q J. Research on the key technology of SiC coating defects detection using pulsed infrared thermal wave non-destructive testing method[D]. Harbin:Harbin Institute of Technology, 2014(in Chinese).

[7]

IBARRACASTANDDO C, TARPANI J R, MALDAGUE X P. Nondestructive testing with thermography[J]. European Journal of Physics, 2013, 34(6):S91-S109.

[8]

VAVILOV V P, BURLEIGH D D. Review of pulsed thermal NDT:Physical principles, theory and data processing[J]. NDT & E International, 2015, 73(1):28-52.

[9]

QUEK S, ALMOND D P. Defect detection capability of pulsed transient thermography[J]. Insight-Non-Destructive Testing and Condition Monitoring, 2005, 47(4):212-215.

[10]

CONNOLLY M P. A review of factors influencing defect detection in infrared thermography:Applications to coated materials[J]. Journal of Nondestructive Evaluation, 1991, 10(3):89-96.

[11]

LÍPEZ F, IBARRA-CASTANEDO C, NICOLAU V, et al. Pulsed thermography signal processing techniques based on the 1D solution of the heat equation applied to the inspection of laminated composites[J]. Materials Evaluation, 2014, 72(1):91-102.

[12]

ALMOND D P, PICKERING S G. An analytical study of the pulsed thermography defect detection limit[J]. Journal of Applied Physics, 2012, 111(9):093510.

[13]

BENDADA A, SFARRA S, GENEST M, et al. How to reveal subsurface defects in Kevlar (R) composite materials after an impact loading using infrared vision and optical NDT techniques[J]. Engineering Fracture Mechanics, 2013, 108:195-208.

[14]

HOLLAND S D, RENSHAW J. Physics-based image enhancement for infrared thermography[J]. NDT & E International, 2010, 43(5):440-445.

[15]

QUEK S, ALMOND D P. Defect detection capability of pulsed transient thermography[J]. Insight-Non-Destructive Testing and Condition Monitoring, 2005, 47(4):212-215.

[16]

BURGHOLZER P. Thermodynamic limits of spatial resolution in active thermography[J]. International Journal of Thermophysics, 2015, 36(9):2328-2341.

[17]

郭伟, 董丽虹, 王海斗, 等. 再制造喷涂层界面结合性能脉冲红外热像评估技术[J]. 中国表面工程, 2018, 31(3):168-176. GUO W, DONG L H, WANG H D, et al. Interfacial adhesion performance assessment of remanufacturing spraying coatings by pulsed thermography[J]. China Surface Engineering, 2018, 31(3):168-176(in Chinese).

[18]

BAI L, GAO B, TIAN S, et al. A comparative study of principal component analysis and independent component analysis in eddy current pulsed thermography data processing[J]. Review of Scientific Instruments, 2013, 84(10):104901.

[19]

SHEPARD S M, AHMED T, RUBADEUX B A, et al. Synthetic processing of pulsed thermographic data for inspection of turbine components[J]. Insight, 2001, 43(9):587-589.

[20]

TAO N, ZENG Z, FENG L, et al. The application of pulsed thermography in the inspection of wind turbine blades[C]//International Symposium on Photoelectronic Detection and Imaging. International Society for Optics and Photonics, 2011:9879-9891.

[21]

BALAGEAS D L, ROCHE J M, LEROY F H. Comparison and ranking procedure for an objective assessment of thermographic NDE methods[C]//International Conference on Quantitative Infrared Thermography, 2016.

[22]

PTASZEK G, CAWLEY P, ALMOND D P, et al. Artificial disbonds for calibration of transient thermography inspection of thermal barrier coating systems[J]. NDT & E International, 2012, 45:71-78.

[23]

唐庆菊, 刘元林, 梅晨, 等. 一种热障涂层结构模拟脱粘缺陷试件及其制备方法:CN106124270A[P]. 2016. TANG Q J, LIU Y L, MEI C, et al. A specimen of thermal barrier coating structure with simulated debonding defect and preparation method:CN106124270A[P]. 2016(in Chinese).

[24]

SHEPARD S M, LHOTA J R, RUBADEUX B A, et al. Reconstruction and enhancement of active thermographic image sequences[J]. Optical Engineering, 2003, 42(5):1337-1343.

[25]

KOSHTI A M. Infrared contrast data analysis method for quantitative measurement and monitoring in flash infrared thermography[C]//Structural Health Monitoring and Inspection of Advanced Materials, Aerospace, and Civil Infrastructure 2015, 2015:94370.