FullSSR.pl安装方式部分


/** Author：Henriette-L（3312065512@qq.com）* Date：2021-3-11*/VMware Workstation Pro 14
CentOS 7 64位
FullSSR.pl # https://sourceforge.net/projects/fullssr/.

安装方式
下载后解压
打开终端安装bioperl[@localhost ~]$ perl -MCPAN -e shellCPAN.pm requires configuration, but most of it can be done automatically.
If you answer 'no' below, you will enter an interactive dialog for each
configuration option instead.Would you like to configure as much as possible automatically? [yes] Autoconfigured everything but 'urllist'.Now you need to choose your CPAN mirror sites.  You can let me
pick mirrors for you, you can select them from a list or you
can enter them by hand.Would you like me to automatically choose some CPAN mirror
sites for you? (This means connecting to the Internet) [yes]
Trying to fetch a mirror list from the Internet
Fetching with LWP:
http://www.perl.org/CPAN/MIRRORED.BYLooking for CPAN mirrors near you (please be patient)
...................... done!New urllisthttp://ftp.kr.freebsd.org/pub/CPAN/http://cpan.uni-altai.ru/http://mirror.truenetwork.ru/CPAN/Autoconfiguration complete.commit: wrote '/home/112shiyanshi/.cpan/CPAN/MyConfig.pm'You can re-run configuration any time with 'o conf init' in the CPAN shell
Terminal does not support AddHistory.cpan shell -- CPAN exploration and modules installation (v1.9800)
Enter 'h' for help.cpan[1]> install Module::Build./Build install  -- OKcpan[2]> o conf prefer_installer MBprefer_installer   [MB]
Please use 'o conf commit' to make the config permanent!cpan[3]> o conf commitcommit: wrote '/root/.cpan/CPAN/MyConfig.pm'cpan[4]> install LWPAppending installation info to /root/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.podOALDERS/libwww-perl-6.53.tar.gz/bin/make install  -- OKcpan[5]> install Digest::MD5Appending installation info to /root/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.podTODDR/Digest-MD5-2.58.tar.gz/bin/make install  -- OKcpan[6]> d /bioperl/Distribution    BOZO/Fry-Lib-BioPerl-0.15.tar.gz
Distribution    CDRAUG/BioPerl-1.7.4.tar.gz
Distribution    CDRAUG/Dist-Zilla-PluginBundle-BioPerl-0.27.tar.gz
Distribution    CJFIELDS/BioPerl-1.007002.tar.gz
Distribution    CJFIELDS/BioPerl-1.6.924.tar.gz
Distribution    CJFIELDS/BioPerl-1.7.7.tar.gz
Distribution    CJFIELDS/BioPerl-1.7.8.tar.gz
Distribution    CJFIELDS/BioPerl-DB-1.006900.tar.gz
Distribution    CJFIELDS/BioPerl-Network-1.006902.tar.gz
Distribution    CJFIELDS/BioPerl-Run-1.007002.tar.gz
Distribution    CJFIELDS/BioPerl-Run-1.007003.tar.gz
Distribution    CJFIELDS/Bundle-BioPerl-2.1.9.tar.gz
12 items foundcpan[8]> install CJFIELDS/BioPerl-1.6.924.tar.gzCJFIELDS/BioPerl-1.6.924.tar.gz./Build install  -- OK

安装插件BioSqIocpan[1]> install Module::BuildReading '/root/.cpan/Metadata'Database was generated on Sat, 06 Mar 2021 02:55:31 GMT
o confFetching with LWP:
http://www.perl.com/CPAN/authors/01mailrc.txt.gz
oReading '/root/.cpan/sources/authors/01mailrc.txt.gz'
............................................................................DONE
Fetching with LWP:
http://www.perl.com/CPAN/modules/02packages.details.txt.gz
Reading '/root/.cpan/sources/modules/02packages.details.txt.gz'Database was generated on Mon, 08 Mar 2021 09:41:03 GMT
.............New CPAN.pm version (v2.28) available.[Currently running version is v1.9800]You might want to tryinstall CPANreload cpanto both upgrade CPAN.pm and run the new version without leavingthe current session................................................................DONE
Fetching with LWP:
http://www.perl.com/CPAN/modules/03modlist.data.gz
Reading '/root/.cpan/sources/modules/03modlist.data.gz'
DONE
Writing /root/.cpan/Metadata
Module::Build is up to date (0.4231).cpan[2]> o conf prefer_installer MBKnown options:conf    set or get configuration variablesdebug   set or get debugging optionscpan[3]> o conf commit
commit: wrote '/root/.cpan/CPAN/MyConfigcpan[4]> install LWPAppending installation info to /root/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.podOALDERS/libwww-perl-6.53.tar.gz/bin/make install  -- OKcpan[5]> install Bio::SeqIOAppending installation info to /root/perl5/lib/perl5/x86_64-linux-thread-multi/perllocal.podCJFIELDS/BioPerl-1.7.8.tar.gz/bin/make install  -- OKcpan[7]> d /bioperl/
Distribution    BOZO/Fry-Lib-BioPerl-0.15.tar.gz
Distribution    CDRAUG/BioPerl-1.7.4.tar.gz
Distribution    CDRAUG/Dist-Zilla-PluginBundle-BioPerl-0.27.tar.gz
Distribution    CJFIELDS/BioPerl-1.007002.tar.gz
Distribution    CJFIELDS/BioPerl-1.6.924.tar.gz
Distribution    CJFIELDS/BioPerl-1.7.7.tar.gz
Distribution    CJFIELDS/BioPerl-1.7.8.tar.gz
Distribution    CJFIELDS/BioPerl-DB-1.006900.tar.gz
Distribution    CJFIELDS/BioPerl-Network-1.006902.tar.gz
Distribution    CJFIELDS/BioPerl-Run-1.007002.tar.gz
Distribution    CJFIELDS/BioPerl-Run-1.007003.tar.gz
Distribution    CJFIELDS/Bundle-BioPerl-2.1.9.tar.gz
12 items foundcpan[9]> install CJFIELDS/BioPerl-1.6.924.tar.gzCJFIELDS/BioPerl-1.6.924.tar.gz./Build install  -- OK

同理安装FullSSR.pl文件下use的所有BioPerl插件

安装Primer3[112shiyanshi@localhost ~]$ sudo su
[sudo] 112shiyanshi 的密码：
[root@localhost 112shiyanshi]# sudo apt-get install -y build-essential g++ cmake git-all
sudo: apt-get：找不到命令
[root@localhost 112shiyanshi]# git clone https://github.com/primer3-org/primer3.git primer3
正克隆到 'primer3'...
remote: Enumerating objects: 14, done.
remote: Counting objects: 100% (14/14), done.
remote: Compressing objects: 100% (12/12), done.
remote: Total 7695 (delta 1), reused 7 (delta 1), pack-reused 7681
接收对象中: 100% (7695/7695), 32.35 MiB | 38.00 KiB/s, done.
处理 delta 中: 100% (5668/5668), done.
Checking out files: 100% (689/689), done.
[root@localhost 112shiyanshi]# cd primer3/src
[root@localhost src]# make
no windows
gcc -c -g -Wall -O2  primer3_boulder_main.c
gcc -c -g -Wall -O2  -o format_output.o format_output.c
gcc -c -g -Wall -O2  -o read_boulder.o read_boulder.c
gcc -c -g -Wall -O2  -o print_boulder.o print_boulder.c
g++ -c -g -Wall -O2 -std=c++11  -o libprimer3.o libprimer3.cc
gcc -c -g -Wall -O2 -o p3_seq_lib.o p3_seq_lib.c
ar rv libprimer3.a libprimer3.o p3_seq_lib.o
ar: 正在创建 libprimer3.a
a - libprimer3.o
a - p3_seq_lib.o
ranlib libprimer3.a
gcc -c -g -Wall -O2  -o dpal_primer.o dpal.c
ar rv libdpal.a dpal_primer.o
ar: 正在创建 libdpal.a
a - dpal_primer.o
ranlib libdpal.a
gcc -c -g -Wall -O2 -ffloat-store  -o thal_primer.o thal.c
ar rv libthal.a thal_primer.o
ar: 正在创建 libthal.a
a - thal_primer.o
ranlib libthal.a
gcc -c -g -Wall -O2 -ffloat-store  -o thal_parameters.o thal_parameters.c
ar rv libthalpara.a thal_parameters.o
ar: 正在创建 libthalpara.a
a - thal_parameters.o
ranlib libthalpara.a
gcc -g -Wall -O2   -c -o oligotm.o oligotm.c
ar rv liboligotm.a oligotm.o
ar: 正在创建 liboligotm.a
a - oligotm.o
ranlib liboligotm.a
gcc -c -g -Wall -O2  masker.c
ar rv libmasker.a masker.o
ar: 正在创建 libmasker.a
a - masker.o
ranlib libmasker.a
g++ -g -Wall -O2 -std=c++11 -lstdc++ -g -o primer3_core primer3_boulder_main.o format_output.o read_boulder.o print_boulder.o libprimer3.a libdpal.a libthal.a libthalpara.a liboligotm.a libmasker.a  -lm
gcc -c -g -Wall -o ntdpal_main.o ntdpal_main.c
gcc -c -g -Wall -O2 -o dpal.o dpal.c
gcc -g -o ntdpal ntdpal_main.o dpal.o
gcc -c -g -Wall -O2 -o thal_main.o thal_main.c
gcc -c -g -Wall -O2 -ffloat-store -o thal.o thal.c
gcc -g -o ntthal thal_main.o thal.o thal_parameters.o -lm
gcc -g -Wall -O2 -o oligotm oligotm_main.c liboligotm.a  -lm
gcc -g -Wall -O2 -o long_seq_tm_test long_seq_tm_test_main.c oligotm.o  -lm
g++ -g -Wall -O2 -std=c++11 -lstdc++ -o primer3_masker masker_main.c libprimer3.a libdpal.a libthal.a libthalpara.a liboligotm.a libmasker.a  -lm
[root@localhost src]# make test
no windows
cd ../test; make test
make[1]: 进入目录“/home/112shiyanshi/primer3/test”
cd ../src; make
no windows
make[2]: 进入目录“/home/112shiyanshi/primer3/src”
make[2]: 对“all”无需做任何事。
make[2]: 离开目录“/home/112shiyanshi/primer3/src”
perl cmdline_test.pl TESTING command line argumentsTest 1... [OK]
Test 2... [OK]
Test 3... [OK]
Test 4... [OK]
Test 5... [OK]
Passed all tests - [OK]perl oligotm_test.pl TESTING Tm CALCULATIONSTm tests nr 1-50: [OK]echo; echo; echo 'TESTING ALIGNMENT CALCS'; echo; perl dpal_test.pl ; TESTING ALIGNMENT CALCSError handling of too-long sequence...[OK]
Default implementations + alignment...[OK]
Default implementations + NO alignment 1...[OK]
Default implementations + NO alignment 2...[OK]
Force _dpal_generic...[OK]
Force _dpal_long_nopath_generic 1...[OK]
Force _dpal_long_nopath_generic 2...[OK]
Force long maxgap1 functions 1...[OK]
Force long maxgap1 functions 2...[OK]
echo; echo; echo 'TESTING THERMODYNAMIC ALIGNMENT CALCS'; echo; perl thal_test.pl ;TESTING THERMODYNAMIC ALIGNMENT CALCSError handling of too-long sequence...
1................................... [OK]
Default implementations + alignment...[OK]
Default implementations + NO alignment 1...[OK]
Default implementations + NO alignment 2...[OK]
echo; echo; echo 'TESTING MASKER'; echo; perl masker_test.pl ;TESTING MASKERDefault implementations...[OK]
echo; echo; echo 'TESTING primer3_core'; echo; perl p3test.pl TESTING primer3_coremkdir: ../test/primer_list_tmp
mkdir: ../test/primer1_list_tmp
mkdir: ../test/primer1_th_list_tmp
mkdir: ../test/th-w-other-tasks_list_tmp
p3test.pl for primer3_core version 2.5.0p3test.pl: testing ../src/primer3_coreSTART, Tue Mar  9 12:51:02 2021testing fatal errors..../primer_global_err/bad_divalent_dntp_conc_1
Testing --output and --error flags on
../src/primer3_core --strict_tags ./primer_global_err/bad_divalent_dntp_conc_1.in --output ./primer_global_err/bad_divalent_dntp_conc_1.tmp --error ./primer_global_err/bad_divalent_dntp_conc_1.tmp2./primer_global_err/bad_divalent_dntp_conc_2./primer_global_err/bad_divalent_dntp_conc_3./primer_global_err/bad_divalent_dntp_conc_4./primer_global_err/bad_dna_conc./primer_global_err/bad_first_base_index./primer_global_err/bad_float_1./primer_global_err/bad_float_2./primer_global_err/bad_float_3./primer_global_err/bad_float_4./primer_global_err/bad_gc_1./primer_global_err/bad_gc_2./primer_global_err/bad_gc_3./primer_global_err/bad_gc_int_1./primer_global_err/bad_gc_int_2./primer_global_err/bad_gc_int_3./primer_global_err/bad_min_three_prime_distance./primer_global_err/bad_num_ns./primer_global_err/bad_num_ns_int./primer_global_err/bad_product_sizes_1./primer_global_err/bad_product_sizes_2./primer_global_err/bad_product_sizes_3./primer_global_err/bad_product_sizes_4./primer_global_err/bad_salt_conc./primer_global_err/bad_self_any./primer_global_err/bad_self_any_int./primer_global_err/bad_self_end./primer_global_err/bad_self_end_int./primer_global_err/bad_settings0./primer_global_err/bad_settings1./primer_global_err/bad_settings2./primer_global_err/bad_settings3./primer_global_err/bad_settings4./primer_global_err/bad_settings5./primer_global_err/bad_settings6./primer_global_err/empty_1./primer_global_err/empty_product_size./primer_global_err/gc_clamp_min_size./primer_global_err/incorrect_task./primer_global_err/io_gc_content_obj_fn./primer_global_err/io_obj_fn./primer_global_err/junction_overlap_max_size./primer_global_err/junction_overlap_min_size./primer_global_err/max_min_tm./primer_global_err/max_min_tm_int./primer_global_err/max_opt_tm./primer_global_err/max_opt_tm_int./primer_global_err/MAX_PRIMER_LENGTH./primer_global_err/max_size_limit_int./primer_global_err/max_size_min_product./primer_global_err/max_size_min_product_int./primer_global_err/min_opt_tm./primer_global_err/min_opt_tm_int./primer_global_err/mishyb_obj_fn./primer_global_err/mispr_obj_fn./primer_global_err/must_match_length_0./primer_global_err/must_match_length_1./primer_global_err/must_match_length_10./primer_global_err/must_match_length_2./primer_global_err/must_match_length_3./primer_global_err/must_match_length_4./primer_global_err/must_match_length_5./primer_global_err/must_match_length_6./primer_global_err/must_match_length_7./primer_global_err/must_match_length_8./primer_global_err/must_match_length_9./primer_global_err/no_equal./primer_global_err/no_terminal_equal./primer_global_err/opt_max_size./primer_global_err/opt_max_size_int./primer_global_err/opt_min_size./primer_global_err/opt_min_size_int./primer_global_err/pair_mispr./primer_global_err/pr_gc_content_obj_fn./primer_global_err/product_size_obj_fn./primer_global_err/product_tm_obj_fn./primer_global_err/repeat_lib_err./primer_global_err/repeat_lib_err1./primer_global_err/repeat_lib_err2./primer_global_err/repeat_lib_err3./primer_global_err/repeat_lib_err4./primer_global_err/repeat_lib_err5./primer_global_err/repeat_lib_err6./primer_global_err/repeat_lib_int_err./primer_global_err/repeat_lib_int_err1./primer_global_err/repeat_lib_int_err2./primer_global_err/repeat_lib_int_err3./primer_global_err/repeat_lib_int_err4./primer_global_err/repeat_lib_int_err5./primer_global_err/repeat_lib_int_err6./primer_global_err/seq_quality1./primer_global_err/seq_quality2./primer_global_err/seq_quality3./primer_global_err/seq_quality4./primer_global_err/too_many_product_sizes./primer_global_err/zero_min_size./primer_global_err/zero_num_return
[OK]
primer_must_use_th...0s [OK]
primer_sec_struct_dpal...0s [OK]
primer_task_th...2s [OK]
primer_thal_args...1s [OK]
primer_thal_max_seq_error...1s [OK]
primer_first_base_index...0s [OK]
primer_must_match...0s [OK]
primer_masker...7s [OK]
primer_masker_formatted...6s [OK]
test_compl_error...0s [OK]
test_left_to_right_of_right...0s [OK]
dv_conc_vs_dntp_conc...0s [OK]
primer_boundary...1s [OK]
primer_boundary1...0s [OK]
primer_boundary_formatted...0s [OK]
primer_boundary1_formatted...0s [OK]
primer3_v1_1_4_default_settings...0s [OK]
primer3web_v0_4_0_default_settings...0s [OK]
primer3web_v3_0_0_default_settings...2s [OK]
primer3web_v4_0_0_default_settings...1s [OK]
primer_internal...0s [OK]
primer_internal1...0s [OK]
primer_internal_formatted...0s [OK]
primer_internal1_formatted...0s [OK]
primer_ok_regions...0s [OK]
primer_ok_regions_formatted...0s [OK]
primer_ok_regions2...8s [OK]
primer_tm_lc_masking...0s [OK]
primer_tm_lc_masking_formatted...0s [OK]
primer_start_codon...1s [OK]
primer_task...0s [OK]
primer_task_formatted...0s [OK]
primer_renewed_tasks...0s [OK]
primer_new_tasks...0s [OK]
primer_new_tasks_formatted...1s [OK]
primer_windows_newlines...1s [OK]
primer_must_overlap_point...1s [OK]
primer_overlap_junction...0s [OK]
primer_all_settingsfiles...0s [OK]
primer_high_tm_load_set...0s [OK]
primer_high_gc_load_set...0s [OK]
primer_gc_end...0s [OK]
primer_check...0s [OK]
primer_must_use...0s [OK]
primer_must_use_formatted...0s [OK]
primer_syntax...0s [OK]
primer_end_pathology...0s [OK]
primer_num_best...0s [OK]
primer_quality_boundary...1s [OK]
primer...1s [OK]
primer_list_files...[OK]
primer1...0s [OK]
primer1_list_files...[OK]
primer_mispriming...1s [OK]
primer_mispriming_formatted...0s [OK]
primer_mispriming_boundary1...0s [OK]
primer_mispriming_boundary1_formatted...0s [OK]
primer_mispriming_boundary2...0s [OK]
primer_mispriming_boundary2_formatted...0s [OK]
primer_mispriming_long_lib...1s [OK]
primer_rat...0s [OK]
primer_human...2s [OK]
long_seq...0s [OK]
primer_position_penalty...1s [OK]
primer_position_penalty_formatted...0s [OK]
p3-tmpl-mispriming...1s [OK]
primer_three_prime_distance...0s [OK]
primer_obj_fn...3s [OK]
p3_3_prime_n...1s [OK]
primer_masker...4s [OK]
primer_masker_formatted...3s [OK]
primer_mispriming_th...10s [OK]
th-w-other-tasks...16s [OK]
th-w-other-tasks_list_files...[OK]
primer_new_tasks_th...21s [OK]
primer_sec_struct_thal...22s [OK]
primer_thermod_align...63s [OK]
primer_thermod_align_formatted...46s [OK]
primer1_th...141s [OK]
primer1_th_list_files...[OK]
primer_lib_amb_codes...
NOTE: this test takes _much_ longer than the others (5 to 20 minutes or more).
starting primer_lib_amb_codes at Tue Mar  9 12:57:20 2021...165s [OK]Tests in p3test.pl ran for 543 s (9.05 min)DONE Tue Mar  9 13:00:05 2021 Passed all tests - [OK]echo; echo; echo "Testing completed. You must check the test output for the string FAILED"; echo; echo;Testing completed. You must check the test output for the string FAILEDmake[1]: 离开目录“/home/112shiyanshi/primer3/test”

以上插件安装完毕

FullSSR.pl安装方式部分相关推荐

python基础：python扩展包的安装方式
python扩展包有三种安装方式: 1. pip安装方式.python3默认自带pip,无需另外安装:在python2.7版本上默认为easy_install安装工作进行安装,如果需要使用pip安装, ...
vim插件的安装方式 -- vim注释插件和doxygen函数注释生成插件-ctrlp插件-tabular等号对齐插件...
使用unzip的时候指定 -d选项, 是说明解压到的目标地址. 这个参数还是比较方便的, 比直接unzip到当前目录, 然后在去拷贝到目标目录, 然后再删除当前目录中的解压文件夹, 方便多了. 使 ...
容器云之K8s自动化安装方式的选择
目前kubernetes 已经发展到1.5的时代,但在这之前学习和使用kubernetes还是走了不少弯路,第一个问题就是安装,也许你会说安装很简单.照着官网或网上抄一篇就可以装上了-- 而我们使用k ...
linux安装node js的二进制文件安装方式的注意事项
在linux安装node一般有2种方式. 第一种方式: Node.js 源码安装,也就是nodejs官网上的 Source Code源码. 第二种方式: 直接拿 Node.js 预编译安装包(二进制文 ...
Linux下MySQL的几种安装方式
闲来有空,整理下Linux下Mysql的几种安装方式,分别使用yum/rpm.常规方式编译安装.cmake方式编译安装以及使用二进制方式免编译安装MySQL Linux系统环境: CentOS rel ...
python之路 mysql 博客园_教为学：Python学习之路（二）：MySQLdb的几种安装方式，以及用Python测试连接MySql...
教为学:Python学习之路(二):MySQLdb的几种安装方式,以及用Python测试连接MySql Easy_install安装MySQLdb 很简单,以至于我不晓得该怎么说.一句话. sodu ...
Tesorflow源代码安装方式以及错误的解决方法
Tesorflow源代码安装方式以及错误的解决方法参考文章: (1)Tesorflow源代码安装方式以及错误的解决方法 (2)https://www.cnblogs.com/greentomlee/ ...
Eclipse插件安装方式及使用说明
拷贝安装方式 1.通过ECLIPSE_HOME\plugins安装在eclipse的主目录ECLIPSE_HOME, 比如在我的机器上安装的目录是:ECLIPSE_HOME有一个plugins的目录 ...
mysql centos 源码安装_CentOS5下MySQL源码安装方式
1.编译环境安装 uname -aLinux ha01 2.6.18-194.el5 #1 SMP Fri Apr 2 14:58:35 EDT 2010 i686 i686 i386 GNU/Lin ...

FullSSR.pl安装方式部分

FullSSR.pl安装方式部分相关推荐

最新文章

热门文章