参照《自己动手做CPU》自己动手做CPU

前几天参照《自己动手做CPU》一书利用vivado自己做了CPU，当然我只是个学生的水平，这里仅仅作为记录，希望可以给大家一定意义的参考。

文件关系

SampleCPU文件夹里

其中lib文件夹中

mul文件夹中

代码

这次的大作业不是我一个人完成的，也要感谢舍友的大力相助，还有些内容不是我完成的，所以就不公开啦，我只公开我们自己写的部分。

流程图

IF模块

`include "lib/defines.vh"
module IF(input wire clk,  //传入时钟周期input wire rst,  //复位信号，负责初始化各项数据input wire [`StallBus-1:0] stall, //停止信号，负责暂停流水线input wire [`BR_WD-1:0] br_bus,   //从ID段传入，存放指令跳转的相关信息output wire [`IF_TO_ID_WD-1:0] if_to_id_bus,  //IF段到ID段的总线，将IF段的数据进行打包output wire inst_sram_en, //能不能从内存读取指令的使能output wire [3:0] inst_sram_wen,//能不能向内存中写入数据的使能output wire [31:0] inst_sram_addr,//写入内存时的写入地址output wire [31:0] inst_sram_wdata//写入内存的数据// input wire flush,// input wire [31:0] new_pc,
);reg [31:0] pc_reg;reg ce_reg;wire [31:0] next_pc;wire br_e;wire [31:0] br_addr;assign {br_e,br_addr} = br_bus;always @ (posedge clk) beginif (rst) beginpc_reg <= 32'hbfbf_fffc;endelse if (stall[0]==`NoStop) beginpc_reg <= next_pc;endendalways @ (posedge clk) beginif (rst) begince_reg <= 1'b0;endelse if (stall[0]==`NoStop) begince_reg <= 1'b1;endendassign next_pc = br_e ? br_addr : pc_reg + 32'h4;//判断是否需要跳转，若跳转使用传进来的跳转地址，否则选择pc+4assign inst_sram_en = ce_reg;assign inst_sram_wen = 4'b0;assign inst_sram_addr = pc_reg;assign inst_sram_wdata = 32'b0;assign if_to_id_bus = {ce_reg,pc_reg};endmodule

ID模块

`include "lib/defines.vh"
module ID(//这个覆盖了书中ID段和ID/EX段input wire clk,input wire rst,// input wire flush,input wire [`StallBus-1:0] stall,output wire stallreq,input wire [`IF_TO_ID_WD-1:0] if_to_id_bus,input wire [31:0] inst_sram_rdata,input wire [`WB_TO_RF_WD-1:0] wb_to_rf_bus,input wire [`EX_TO_RF_BUS-1:0] ex_to_rf_bus,//Siriinput wire [`WB_TO_RF_WD-1:0] mem_to_rf_bus,//Sirioutput wire [`ID_TO_EX_WD-1:0] id_to_ex_bus,output wire [`BR_WD-1:0] br_bus//Siri);//Siri//读入mem的返回值wire mem_to_rf_we;wire [4:0] mem_to_rf_waddr;wire [31:0] mem_to_rf_wdata;assign {mem_to_rf_we,mem_to_rf_waddr,mem_to_rf_wdata}=mem_to_rf_bus;//Siri//Siri//读入ex的返回值wire ex_to_rf_we;wire [4:0] ex_to_rf_waddr;wire [31:0] ex_to_rf_wdata;wire [5:0] ex_op;assign{ex_op,ex_to_rf_we,ex_to_rf_waddr,ex_to_rf_wdata}=ex_to_rf_bus;//Sirireg [`IF_TO_ID_WD-1:0] if_to_id_bus_r;wire [31:0] inst;wire [31:0] id_pc;wire ce;wire wb_rf_we;wire [4:0] wb_rf_waddr;wire [31:0] wb_rf_wdata;reg id_stop;always @ (posedge clk) beginif (rst) beginif_to_id_bus_r <= `IF_TO_ID_WD'b0;id_stop <=1'b0;        end// else if (flush) begin//     ic_to_id_bus <= `IC_TO_ID_WD'b0;// endelse if (stall[1]==`Stop && stall[2]==`NoStop) beginif_to_id_bus_r <= `IF_TO_ID_WD'b0;id_stop <=1'b0;  endelse if (stall[1]==`NoStop) beginif_to_id_bus_r <= if_to_id_bus;id_stop <=1'b0;  end else if (stall[2]==`Stop)beginid_stop <= 1'b1;endendassign inst = (~id_stop)?inst_sram_rdata:inst;assign {ce,id_pc} = if_to_id_bus_r;assign {wb_rf_we,wb_rf_waddr,wb_rf_wdata} = wb_to_rf_bus;wire [5:0] opcode;wire [4:0] rs,rt,rd,sa;wire [5:0] func;wire [15:0] imm;wire [25:0] instr_index;wire [19:0] code;wire [4:0] base;wire [15:0] offset;wire [2:0] sel;wire [63:0] op_d, func_d;wire [31:0] rs_d, rt_d, rd_d, sa_d;wire [2:0] sel_alu_src1;wire [3:0] sel_alu_src2;wire [11:0] alu_op;wire data_ram_en;wire stop_div_mul;wire [3:0] data_ram_wen;wire rf_we;wire [4:0] rf_waddr;wire sel_rf_res;wire [2:0] sel_rf_dst;//modifiedwire [31:0] rdata1, rdata2;wire [31:0] rdata1_1, rdata2_1;assign opcode = inst[31:26];assign rs = inst[25:21];//reg1_addr_oassign rt = inst[20:16];//reg2_addr_oassign rd = inst[15:11];assign sa = inst[10:6];assign func = inst[5:0];assign imm = inst[15:0];assign instr_index = inst[25:0];assign code = inst[25:6];assign base = inst[25:21];assign offset = inst[15:0];assign sel = inst[2:0];regfile u_regfile(.clk    (clk    ),.raddr1 (rs ),.rdata1 (rdata1_1 ),.raddr2 (rt ),.rdata2 (rdata2_1 ),.we     (wb_rf_we     ),.waddr  (wb_rf_waddr  ),.wdata  (wb_rf_wdata  )); assign rdata1 = (ce == 1'b0) ? 32'b0 : ((ex_to_rf_we == 1'b1 ) && (ex_to_rf_waddr==rs)) ? ex_to_rf_wdata :((mem_to_rf_we == 1'b1) && (mem_to_rf_waddr==rs))? mem_to_rf_wdata : rdata1_1 ;assign rdata2 = (ce == 1'b0) ? 32'b0 : ((ex_to_rf_we == 1'b1 ) && (ex_to_rf_waddr==rt)) ? ex_to_rf_wdata :((mem_to_rf_we == 1'b1) && (mem_to_rf_waddr==rt))? mem_to_rf_wdata : rdata2_1 ;//Siriwire inst_ori, inst_lui, inst_addiu;wire inst_add,inst_addi,inst_addu;wire inst_sub,inst_subu;wire inst_slt,inst_slti,inst_sltu,inst_sltiu;wire inst_div,inst_divu,inst_mult,inst_multu;//乘除wire inst_and,inst_andi,inst_nor,inst_or,inst_xor,inst_xori;   ////移位wire inst_sllv,inst_sll;//逻辑左移wire inst_srav,inst_sra;//算术右移wire inst_srlv,inst_srl;//逻辑右移//分支跳转wire inst_bne;//不等跳转wire inst_bgez,inst_bgtz;//大于（&？等于）0跳转wire inst_blez,inst_bltz;//小于（&？等于）0跳转wire inst_bgezal;//大于等于0跳转，并保存pc值至通用寄存器wire inst_bltzal;//小于0跳转，并保存pc值至通用寄存器wire inst_beq,inst_beqz;wire inst_j,inst_jal,inst_jr,inst_jalr;//无条件跳转//数据移动wire inst_mfhi,inst_mflo,inst_mthi,inst_mtlo;//自陷指令wire inst_break,inst_syscall;//访存指令wire inst_lb,inst_lbu;wire inst_lh,inst_lhu;wire inst_lw;wire inst_sb,inst_sh,inst_sw;//特权指令wire inst_eret;wire inst_mfc0;wire inst_mtc0;//wire op_add, op_sub, op_slt, op_sltu;wire op_and, op_nor, op_or, op_xor;wire op_sll, op_srl, op_sra, op_lui;decoder_6_64 u0_decoder_6_64(.in  (opcode  ),.out (op_d ));decoder_6_64 u1_decoder_6_64(.in  (func  ),.out (func_d ));decoder_5_32 u0_decoder_5_32(.in  (rs  ),.out (rs_d ));decoder_5_32 u1_decoder_5_32(.in  (rt  ),.out (rt_d ));assign inst_add     = op_d[6'b00_0000]&func_d[6'b10_0000];assign inst_addi    = op_d[6'b00_1000];assign inst_addu    = op_d[6'b00_0000]&func_d[6'b10_0001];assign inst_addiu   = op_d[6'b00_1001];assign inst_sub     = op_d[6'b00_0000]&func_d[6'b10_0010];assign inst_subu    = op_d[6'b00_0000]&func_d[6'b10_0011];assign inst_slt     = op_d[6'b00_0000]&func_d[6'b10_1010];assign inst_slti    = op_d[6'b00_1010];assign inst_sltu    = op_d[6'b00_0000]&func_d[6'b10_1011];assign inst_sltiu   = op_d[6'b00_1011];assign inst_div     = op_d[6'b000000]&func_d[6'b011010];assign inst_divu    = op_d[6'b000000]&func_d[6'b011011];assign inst_mult    = op_d[6'b000000]&func_d[6'b011000];assign inst_multu   = op_d[6'b000000]&func_d[6'b011001];assign inst_and     = op_d[6'b00_0000]&func_d[6'b10_0100];assign inst_andi    = op_d[6'b00_1100];assign inst_lui     = op_d[6'b00_1111];assign inst_nor     = op_d[6'b00_0000]&func_d[6'b10_0111];assign inst_or      = op_d[6'b00_0000]&func_d[6'b10_0101];assign inst_ori     = op_d[6'b00_1101];assign inst_xor     = op_d[6'b00_0000]&func_d[6'b10_0110];assign inst_xori    = op_d[6'b00_1110];assign inst_sllv    = op_d[6'b00_0000]&func_d[6'b00_0100];assign inst_sll     = op_d[6'b00_0000]&func_d[6'b00_0000];assign inst_srav    = op_d[6'b00_0000]&func_d[6'b00_0111];assign inst_sra     = op_d[6'b00_0000]&func_d[6'b00_0011];assign inst_srlv    = op_d[6'b00_0000]&func_d[6'b00_0110];assign inst_srl     = op_d[6'b00_0000]&func_d[6'b00_0010];assign inst_beq     = op_d[6'b00_0100];assign inst_beqz    = op_d[6'b00_0100];   //*****************assign inst_bne     = op_d[6'b00_0101];assign inst_bgez    = op_d[6'b00_0001]&rt_d[5'b0_0001];assign inst_bgtz    = op_d[6'b00_0111];assign inst_blez    = op_d[6'b00_0110];assign inst_bltz    = op_d[6'b00_0001]&rt_d[5'b0_0000];assign inst_bgezal  = op_d[6'b00_0001]&rt_d[5'b1_0001];assign inst_bltzal  = op_d[6'b00_0001]&rt_d[5'b1_0000];assign inst_j       = op_d[6'b00_0010];assign inst_jal     = op_d[6'b00_0011];assign inst_jr      = op_d[6'b00_0000]&func_d[6'b00_1000];assign inst_jalr    = op_d[6'b00_0000]&func_d[6'b00_1001];assign inst_mfhi    = op_d[6'b00_0000]&func_d[6'b01_0000];assign inst_mflo    = op_d[6'b00_0000]&func_d[6'b01_0010];assign inst_mthi    = op_d[6'b00_0000]&func_d[6'b01_0001];assign inst_mtlo    = op_d[6'b00_0000]&func_d[6'b01_0011];assign inst_break   = op_d[6'b00_0000]&func_d[6'b00_1101];assign inst_syscall = op_d[6'b00_0000]&func_d[6'b00_1100];assign inst_lb      = op_d[6'b10_0000];assign inst_lbu     = op_d[6'b10_0100];assign inst_lh      = op_d[6'b10_0001];assign inst_lhu     = op_d[6'b10_0101];assign inst_lw      = op_d[6'b10_0011];assign inst_sb      = op_d[6'b10_1000];assign inst_sh      = op_d[6'b10_1001];assign inst_sw      = op_d[6'b10_1011];assign inst_eret    = op_d[6'b01_0000]&inst[25];assign inst_mfc0    = op_d[6'b01_0000]&rs_d[5'b0_0000];assign inst_mtc0    = op_d[6'b01_0000]&rs_d[5'b0_0100];//Siriassign id_pc_plus8 = id_pc+32'h8;wire  [31:0] idc1;wire [31:0] idc2;// rs to reg1assign sel_alu_src1[0] = inst_add|inst_addi|inst_addu|inst_addiu|inst_sub|inst_subu|inst_div|inst_divu|inst_mult|inst_multu|inst_slt|inst_slti|inst_sltu|inst_sltiu|inst_and|inst_andi|inst_nor|inst_or|inst_ori|inst_xor|inst_xori|inst_sllv|inst_srav|inst_srlv|inst_jr|inst_bgez|inst_lw|inst_sw|inst_jalr|inst_mthi|inst_mtlo|inst_lb|inst_sb|inst_sh|inst_lh|inst_lbu|inst_lhu;//除了第一行都是新加的// pc to reg1assign sel_alu_src1[1] = inst_jal|inst_bgezal|inst_bltzal|inst_jalr;// sa_zero_extend to reg1assign sel_alu_src1[2] = inst_sll|inst_sra|inst_srl;// rt to reg2assign sel_alu_src2[0] = inst_add|inst_addu|inst_sub|inst_subu|inst_div|inst_divu|inst_mult|inst_multu|inst_slt|inst_sltu|inst_sltiu|inst_and|inst_nor|inst_or|inst_xor|inst_sll|inst_sw|inst_sllv|inst_sra|inst_srav|inst_srl|inst_srlv|inst_sb|inst_sh;// imm_sign_extend to reg2assign sel_alu_src2[1] = inst_lui|inst_addiu|inst_addi|inst_slti|inst_sltiu;// 32'h8 to reg2assign sel_alu_src2[2] = inst_jal|inst_bgezal|inst_bltzal|inst_jalr;// imm_zero_extend to reg2assign sel_alu_src2[3] = inst_ori|inst_andi|inst_xori;assign op_add = inst_addiu|inst_add|inst_addi|inst_addu|inst_jal|inst_jalr|inst_bgezal|inst_bltzal;assign op_sub = inst_sub|inst_subu;assign op_slt = inst_slt|inst_slti;assign op_sltu = inst_sltiu|inst_sltu;assign op_and = inst_and|inst_andi;assign op_nor = inst_nor;//或非assign op_or = inst_ori|inst_or;//或assign op_xor = inst_xor|inst_xori;//异或assign op_sll = inst_sll|inst_sllv;assign op_srl = inst_srl|inst_srlv;assign op_sra = inst_sra|inst_srav;assign op_lui = inst_lui;assign alu_op = {op_add, op_sub, op_slt, op_sltu,op_and, op_nor, op_or, op_xor,op_sll, op_srl, op_sra, op_lui};// load and store enableassign data_ram_en = inst_sw|inst_lw|inst_lb|inst_sb|inst_sh|inst_lh|inst_lbu|inst_lhu;assign stop_div_mul = inst_divu|inst_div;// |inst_mult|inst_multu;// write enableassign data_ram_wen = inst_sw?4'b1111:inst_sb?4'b0001:inst_sh?4'b0011:4'b0;wire [3:0] lb_lh_lw;assign lb_lh_lw = inst_lw?4'b1111:inst_lh?4'b0011:inst_lb?4'b0001:inst_lbu?4'b0101:inst_lhu?4'b0111:4'b0;// wire [1:0]sb_sh_en;// assign sb_sh_en = {inst_sb,inst_sh};// regfile store enableassign rf_we = inst_ori|inst_lui| inst_addiu | inst_beq|inst_add|inst_addi|inst_addu|inst_sub|inst_subu|inst_slt|inst_slti|inst_sltu|inst_sltiu|inst_and|inst_andi|inst_nor|inst_or|inst_xor|inst_xori|inst_sllv|inst_sll  //逻辑左移|inst_srav|inst_sra  //算术右移| inst_srlv|inst_srl  //逻辑右移|inst_bgezal  //大于等于0跳转，并保存pc值至通用寄存器|inst_bltzal  //小于0跳转，并保存pc值至通用寄存器|inst_jal|inst_jalr //无条件跳转|inst_lw|inst_mfhi|inst_mflo|inst_lb|inst_lh|inst_lbu|inst_lhu;  // store in [rd]assign sel_rf_dst[0] = inst_add|inst_addu|inst_sub|inst_subu|inst_slt|inst_sltu|inst_and|inst_nor|inst_or|inst_xor|inst_sll|inst_sllv|inst_sra|inst_srav|inst_srl|inst_srlv|inst_jalr|inst_mfhi|inst_mflo;    // store in [rt] assign sel_rf_dst[1] = inst_ori | inst_lui | inst_addiu|inst_slti|inst_sltiu|inst_andi|inst_ori|inst_xori|inst_lw|inst_addi|inst_lb|inst_lh|inst_lbu|inst_lhu;// store in [31]assign sel_rf_dst[2] = inst_jal|inst_bltzal|inst_bgezal;// sel for regfile addressassign rf_waddr = {5{sel_rf_dst[0]}} & rd | {5{sel_rf_dst[1]}} & rt| {5{sel_rf_dst[2]}} & 32'd31;// 0 from alu_res ; 1 from ld_resassign sel_rf_res = inst_lw|inst_lb|inst_lh|inst_lbu|inst_lhu; //hilowire hilo_we;wire [1:0] hilo_read;wire [1:0] hilo_write;wire signed_mul_i;//是否为有符号乘法运算，1为有符号wire [1:0]div_divu;// read from hi loassign hilo_read = {inst_mfhi,inst_mflo};// write to hi loassign hilo_write = {inst_mthi,inst_mtlo};assign hilo_we = inst_mthi|inst_mtlo|inst_divu|inst_div|inst_mult|inst_multu;assign signed_mul_i = inst_mult;assign div_divu = {inst_div,inst_divu};/assign id_to_ex_bus = {lb_lh_lw,       //171:168signed_mul_i,   //167stop_div_mul,   //166div_divu,       //165:164   hilo_write,     //163:162hilo_we,        //161hilo_read,      //160:159id_pc,          // 158:127inst,           // 126:95alu_op,         // 94:83sel_alu_src1,   // 82:80sel_alu_src2,   // 79:76data_ram_en,    // 75data_ram_wen,   // 74:71rf_we,          // 70rf_waddr,       // 69:65sel_rf_res,     // 64rdata1,         // 63:32rdata2          // 31:0};wire br_e;wire [31:0] br_addr;wire rs_eq_rt;wire rs_ge_z;wire rs_gt_z;wire rs_le_z;wire rs_lt_z;wire rs_eq_z;wire [31:0] pc_plus_4;assign pc_plus_4 = id_pc + 32'h4;assign rs_eq_rt = (rdata1 == rdata2);assign rs_ge_z  = (rdata1 >= 0 & rdata1[31] != 1);assign rs_gt_z  = (rdata1 >  0 & rdata1[31] != 1);assign rs_le_z  = (rdata1[31]==1|rdata1==32'b0);assign rs_lt_z  = (rdata1[31]==1);assign rs_eq_z  = ~rdata1;assign br_e = inst_beq & rs_eq_rt|inst_bne & !rs_eq_rt|(inst_bgez|inst_bgezal) & rs_ge_z|inst_bgtz & rs_gt_z|inst_blez & rs_le_z|(inst_bltz|inst_bltzal) & rs_lt_z|inst_j|inst_jal|inst_jr|inst_jalr;//|inst_beqz & rs_eq_z;   *********************assign br_addr = inst_beq|inst_bne|inst_bgez|inst_bgtz|inst_blez|inst_bltz|inst_bgezal|inst_bltzal ?(pc_plus_4 + {{14{inst[15]}},inst[15:0],2'b0}) : inst_j|inst_jal ?{pc_plus_4[31:28],instr_index,2'b0} :inst_jr|inst_jalr ?rdata1 :32'b0;assign br_bus = {br_e,//是否执行相等的跳转br_addr//跳转位置};//stall相关wire load_stop;assign load_stop = (ex_op==6'b10_0011) | (ex_op==6'b10_0000) | (ex_op==6'b10_1011)| (ex_op==6'b10_1001)| (ex_op==6'b10_1000)|(ex_op==6'b10_0001) | (ex_op==6'b10_0100) | (ex_op==6'b10_0101);assign stallreq=(load_stop&&(ce==1'b1)&&(ex_to_rf_we==1'b1)&&(ex_to_rf_waddr==rs))?`Stop :(load_stop&&(ce==1'b1)&&(ex_to_rf_we==1'b1)&&(ex_to_rf_waddr==rt))? `Stop: `NoStop;endmodule

EX模块

`include "lib/defines.vh"
module EX(input wire clk,//传入时钟周期input wire rst,//复位信号，负责初始化各项数据input wire [`StallBus-1:0] stall,//停止信号，负责暂停流水线input wire [`ID_TO_EX_WD-1:0] id_to_ex_bus,//ID段到EX段的总线output wire [`EX_TO_MEM_WD-1:0] ex_to_mem_bus,//EX段到MEM段的总线output wire data_sram_en,//是否对内存有操作output wire [3:0] data_sram_wen,//写入内存的使能output wire [31:0] data_sram_addr,//写入的内存的地址output wire [31:0] data_sram_wdata,//写入内存的数据output wire [`EX_TO_RF_BUS-1:0] ex_to_rf_bus,//EX段到ID段的总线output wire stallreq_for_ex // 判断是否需要暂停（乘法，除法）// input wire flush,
);reg [`ID_TO_EX_WD-1:0] id_to_ex_bus_r;always @ (posedge clk) beginif (rst) beginid_to_ex_bus_r <= `ID_TO_EX_WD'b0;end// else if (flush) begin//     id_to_ex_bus_r <= `ID_TO_EX_WD'b0;// endelse if (stall[2]==`Stop && stall[3]==`NoStop) beginid_to_ex_bus_r <= `ID_TO_EX_WD'b0;endelse if (stall[2]==`NoStop) beginid_to_ex_bus_r <= id_to_ex_bus;endendwire [31:0] ex_pc, inst;wire [11:0] alu_op;wire [2:0] sel_alu_src1;wire [3:0] sel_alu_src2;//wire data_ram_en;//wire [3:0] data_ram_wen;wire rf_we;wire [4:0] rf_waddr;wire sel_rf_res;wire [31:0] rf_rdata1, rf_rdata2;wire [1:0] hilo_read;wire hilo_we;wire [1:0] hilo_write;wire stop_div_mul;wire signed_mul_i;wire [1:0]div_divu;wire [1:0]sb_sh_en;wire [1:0]mul_mulu;//reg is_in_delayslot;wire [3:0]new_data_sram_wen;wire [3:0]lb_lh_lw;assign {mul_mulu,lb_lh_lw,signed_mul_i,stop_div_mul,div_divu,       //166:165// signed_div_i,hilo_write,hilo_we,hilo_read,      ex_pc,          // 148:117inst,           // 116:85alu_op,         // 84:83sel_alu_src1,   // 82:80sel_alu_src2,   // 79:76data_sram_en,    // 75new_data_sram_wen,   // 74:71rf_we,          // 70rf_waddr,       // 69:65sel_rf_res,     // 64rf_rdata1,         // 63:32rf_rdata2          // 31:0} = id_to_ex_bus_r;//load store相关wire [5:0] ld_st_op;assign ld_st_op=data_sram_en?inst[31:26]: 6'b00_0000;assign data_sram_addr=data_sram_en?rf_rdata1+{{16{inst[15]}},inst[15:0]}:32'b0;assign data_sram_wen=    (new_data_sram_wen == 4'b1111)?4'b1111:((new_data_sram_wen == 4'b0011)&(data_sram_addr[1:0]==2'b00))?4'b0011:((new_data_sram_wen == 4'b0011)&(data_sram_addr[1:0]==2'b10))?4'b1100:((new_data_sram_wen == 4'b0001)&(data_sram_addr[1:0]==2'b00))?4'b0001:((new_data_sram_wen == 4'b0001)&(data_sram_addr[1:0]==2'b01))?4'b0010:((new_data_sram_wen == 4'b0001)&(data_sram_addr[1:0]==2'b10))?4'b0100:((new_data_sram_wen == 4'b0001)&(data_sram_addr[1:0]==2'b11))?4'b1000:4'b0;assign data_sram_wdata=(data_sram_wen == 4'b1111)?rf_rdata2:(data_sram_wen == 4'b0011)?{16'b0,rf_rdata2[15:0]}:(data_sram_wen == 4'b1100)?{rf_rdata2[15:0],16'b0}:(data_sram_wen == 4'b1000)?{rf_rdata2[7:0],24'b0}:(data_sram_wen == 4'b0100)?{8'b0,rf_rdata2[7:0],16'b0}:(data_sram_wen == 4'b0010)?{16'b0,rf_rdata2[7:0],8'b0}:(data_sram_wen == 4'b0001)?{24'b0,rf_rdata2[7:0]}:32'b0;// {//                            new_data_sram_wen[3]?rf_rdata2[31:24]:8'b0,//                            new_data_sram_wen[2]?rf_rdata2[23:16]:8'b0,//                            new_data_sram_wen[1]?rf_rdata2[15:8]:8'b0,//                            new_data_sram_wen[0]?rf_rdata2[7:0]:8'b0//                        };wire [4:0] new_lb_lw_lh;assign new_lb_lw_lh =    ( lb_lh_lw == 4'b1111)?5'b1_1111:((lb_lh_lw == 4'b0011)&(data_sram_addr[1:0]==2'b00))?5'b1_1100:((lb_lh_lw == 4'b0011)&(data_sram_addr[1:0]==2'b10))?5'b1_0011:((lb_lh_lw == 4'b0001)&(data_sram_addr[1:0]==2'b00))?5'b1_1000:((lb_lh_lw == 4'b0001)&(data_sram_addr[1:0]==2'b01))?5'b1_0100:((lb_lh_lw == 4'b0001)&(data_sram_addr[1:0]==2'b10))?5'b1_0010:((lb_lh_lw == 4'b0001)&(data_sram_addr[1:0]==2'b11))?5'b1_0001:((lb_lh_lw == 4'b0111)&(data_sram_addr[1:0]==2'b00))?5'b0_1100:((lb_lh_lw == 4'b0111)&(data_sram_addr[1:0]==2'b10))?5'b0_0011:((lb_lh_lw == 4'b0101)&(data_sram_addr[1:0]==2'b00))?5'b0_1000:((lb_lh_lw == 4'b0101)&(data_sram_addr[1:0]==2'b01))?5'b0_0100:((lb_lh_lw == 4'b0101)&(data_sram_addr[1:0]==2'b10))?5'b0_0010:((lb_lh_lw == 4'b0101)&(data_sram_addr[1:0]==2'b11))?5'b0_0001:5'b0_0000;wire [31:0] imm_sign_extend, imm_zero_extend, sa_zero_extend;assign imm_sign_extend = {{16{inst[15]}},inst[15:0]};assign imm_zero_extend = {16'b0, inst[15:0]};assign sa_zero_extend = {27'b0,inst[10:6]};//数据移动指令相关wire [31:0] alu_src1, alu_src2;wire [31:0] alu_result, ex_result;wire [2:0] lsa_data;assign lsa_data = inst[7:6] + 1'b1;assign alu_src1 = sel_alu_src1[1] ? ex_pc :sel_alu_src1[2] ? sa_zero_extend : (inst[31:26] == 6'b011100)? rf_rdata1 << lsa_data :rf_rdata1;assign alu_src2 = sel_alu_src2[1] ? imm_sign_extend :sel_alu_src2[2] ? 32'h8 :sel_alu_src2[3] ? imm_zero_extend : rf_rdata2;alu u_alu(.alu_control (alu_op ), // 进行哪种运算.alu_src1    (alu_src1    ),// 第一个操作数.alu_src2    (alu_src2    ),// 第二个操作数.alu_result  (alu_result  ) // 计算结果);
///wire [63:0]hilo_data;wire [31:0]hi;wire [31:0]lo;// MUL partwire [63:0] mul_result;wire mul_signed; // 有符号乘法标记wire inst_mul, inst_mulu;assign {inst_mul,inst_mulu} = mul_mulu;assign mul_signed = signed_mul_i;wire mul_ready_i;reg mul_start_o;reg [31:0] mul_opdata1_o;reg [31:0] mul_opdata2_o;reg signed_mul_o;reg stallreq_for_mul;mul u_mul(.clk        (clk            ), //时钟.resetn     (~rst           ), //复位信号.mul_signed (signed_mul_o     ),//是否是有符号的乘法.ina        (mul_opdata1_o      ), // 乘法源操作数1.inb        (mul_opdata2_o      ), // 乘法源操作数2.start_i    (mul_start_o  ),//乘法开始信号.ready_o    (mul_ready_i    ),//乘法结束信号.result     (mul_result     ) // 乘法结果 64bit);always @ (*) beginif (rst) beginstallreq_for_mul = `NoStop;mul_opdata1_o = `ZeroWord;mul_opdata2_o = `ZeroWord;mul_start_o = `DivStop;signed_mul_o = 1'b0;endelse beginstallreq_for_mul = `NoStop;mul_opdata1_o = `ZeroWord;mul_opdata2_o = `ZeroWord;mul_start_o = `DivStop;signed_mul_o = 1'b0;case ({inst_mul,inst_mulu})2'b10:beginif (mul_ready_i == `DivResultNotReady) beginmul_opdata1_o = rf_rdata1;mul_opdata2_o = rf_rdata2;mul_start_o = `DivStart;signed_mul_o = 1'b1;stallreq_for_mul = `Stop;endelse if (mul_ready_i == `DivResultReady) beginmul_opdata1_o = rf_rdata1;mul_opdata2_o = rf_rdata2;mul_start_o = `DivStop;signed_mul_o = 1'b1;stallreq_for_mul = `NoStop;endelse beginmul_opdata1_o = `ZeroWord;mul_opdata2_o = `ZeroWord;mul_start_o = `DivStop;signed_mul_o = 1'b0;stallreq_for_mul = `NoStop;endend2'b01:beginif (mul_ready_i == `DivResultNotReady) beginmul_opdata1_o = rf_rdata1;mul_opdata2_o = rf_rdata2;mul_start_o = `DivStart;signed_mul_o = 1'b0;stallreq_for_mul = `Stop;endelse if (mul_ready_i == `DivResultReady) beginmul_opdata1_o = rf_rdata1;mul_opdata2_o = rf_rdata2;mul_start_o = `DivStop;signed_mul_o = 1'b0;stallreq_for_mul = `NoStop;endelse beginmul_opdata1_o = `ZeroWord;mul_opdata2_o = `ZeroWord;mul_start_o = `DivStop;signed_mul_o = 1'b0;stallreq_for_mul = `NoStop;endenddefault:beginendendcaseendend// DIV partwire [63:0] div_result;wire inst_div, inst_divu;wire div_ready_i;///assign {inst_div,inst_divu} = div_divu;///reg stallreq_for_div;assign stallreq_for_ex = stallreq_for_div|stallreq_for_mul;reg [31:0] div_opdata1_o;reg [31:0] div_opdata2_o;reg div_start_o;reg signed_div_o;div u_div(.rst          (rst          ),//复位.clk          (clk          ),//时钟.signed_div_i (signed_div_o ),//是否为有符号除法运算.opdata1_i    (div_opdata1_o    ),//被除数.opdata2_i    (div_opdata2_o    ),//除数.start_i      (div_start_o      ),//是否开始除法运算.annul_i      (1'b0      ),//是否取消除法运算.result_o     (div_result     ), // 除法结果 64bit.ready_o      (div_ready_i      )//除法运算是否结束);always @ (*) beginif (rst) beginstallreq_for_div = `NoStop;div_opdata1_o = `ZeroWord;div_opdata2_o = `ZeroWord;div_start_o = `DivStop;signed_div_o = 1'b0;endelse beginstallreq_for_div = `NoStop;div_opdata1_o = `ZeroWord;div_opdata2_o = `ZeroWord;div_start_o = `DivStop;signed_div_o = 1'b0;case ({inst_div,inst_divu})2'b10:beginif (div_ready_i == `DivResultNotReady) begindiv_opdata1_o = rf_rdata1;div_opdata2_o = rf_rdata2;div_start_o = `DivStart;signed_div_o = 1'b1;stallreq_for_div = `Stop;endelse if (div_ready_i == `DivResultReady) begindiv_opdata1_o = rf_rdata1;div_opdata2_o = rf_rdata2;div_start_o = `DivStop;signed_div_o = 1'b1;stallreq_for_div = `NoStop;endelse begindiv_opdata1_o = `ZeroWord;div_opdata2_o = `ZeroWord;div_start_o = `DivStop;signed_div_o = 1'b0;stallreq_for_div = `NoStop;endend2'b01:beginif (div_ready_i == `DivResultNotReady) begindiv_opdata1_o = rf_rdata1;div_opdata2_o = rf_rdata2;div_start_o = `DivStart;signed_div_o = 1'b0;stallreq_for_div = `Stop;endelse if (div_ready_i == `DivResultReady) begindiv_opdata1_o = rf_rdata1;div_opdata2_o = rf_rdata2;div_start_o = `DivStop;signed_div_o = 1'b0;stallreq_for_div = `NoStop;endelse begindiv_opdata1_o = `ZeroWord;div_opdata2_o = `ZeroWord;div_start_o = `DivStop;signed_div_o = 1'b0;stallreq_for_div = `NoStop;endenddefault:beginendendcaseendendassign hilo_data =  (hilo_we & (inst[5:1]==5'b01101))? div_result:(hilo_we & (inst[5:1]==5'b01100))? mul_result:hilo_write[0]? {32'b0,rf_rdata1}:hilo_write[1]? {rf_rdata1,32'b0} : 64'b0 ;hilo u_hilo(.clk        (clk            ),//传入时钟周期.rst        (rst            ),//复位信号，负责初始化各项数据.we         (hilo_we        ),//是否写入hilo寄存器.hilo_data  (hilo_data      ),//写入hilo寄存器的地址.hi         (hi             ),//写入hi寄存器的数据.lo         (lo             ) //写入lo寄存器的数据); ///assign ex_result = data_sram_en ?data_sram_wdata: hilo_read[1]?hi: hilo_read[0]?lo:alu_result;assign ex_to_mem_bus = {new_lb_lw_lh,    //86:82ld_st_op,       // 81:76ex_pc,          // 75:44data_sram_en,    // 43data_sram_wen,   // 42:39sel_rf_res,     // 38rf_we,          // 37rf_waddr,       // 36:32ex_result       // 31:0};//Siriwire ex_to_rf_we;wire [4:0] ex_to_rf_waddr;wire [31:0] ex_to_rf_wdata;assign ex_to_rf_we =rf_we;assign ex_to_rf_waddr=rf_waddr;assign ex_to_rf_wdata=ex_result;assign ex_to_rf_bus={ld_st_op,ex_to_rf_we,ex_to_rf_waddr,ex_to_rf_wdata};//Siriendmodule

MEM模块

`include "lib/defines.vh"
module MEM(input wire clk,//传入时钟周期input wire rst,//复位信号，负责初始化各项数据input wire [`StallBus-1:0] stall,//停止信号，负责暂停流水线input wire [`EX_TO_MEM_WD-1:0] ex_to_mem_bus,//EX段到MEM段的总线input wire [31:0] data_sram_rdata,//从内存读入的数据output wire [`MEM_TO_WB_WD-1:0] mem_to_wb_bus,//MEM段到WB段的总线output wire [`MEM_TO_RF_BUS-1:0] mem_to_rf_bus//MEM段到ID段的总线// input wire flush,
);reg [`EX_TO_MEM_WD-1:0] ex_to_mem_bus_r;always @ (posedge clk) beginif (rst) beginex_to_mem_bus_r <= `EX_TO_MEM_WD'b0;end// else if (flush) begin//     ex_to_mem_bus_r <= `EX_TO_MEM_WD'b0;// endelse if (stall[3]==`Stop && stall[4]==`NoStop) beginex_to_mem_bus_r <= `EX_TO_MEM_WD'b0;endelse if (stall[3]==`NoStop) beginex_to_mem_bus_r <= ex_to_mem_bus;end// else begin//     pass;// endendwire [31:0] mem_pc;wire data_ram_en;wire [3:0] data_ram_wen;wire sel_rf_res;wire rf_we;wire [4:0] rf_waddr;wire [31:0] rf_wdata;wire [31:0] ex_result;wire [31:0] mem_result;wire [5:0] ld_st_op;wire[4:0]new_lb_lw_lh;assign {new_lb_lw_lh,ld_st_op,       // 81:76mem_pc,         // 75:44                                                                                                                                              data_ram_en,    // 43data_ram_wen,   // 42:39sel_rf_res,     // 38rf_we,          // 37rf_waddr,       // 36:32ex_result       // 31:0} =  ex_to_mem_bus_r;//load store 相关wire mem_inst_lw;assign mem_inst_lw=(ld_st_op==6'b10_0011);// wire mem_inst_sw;// assign mem_inst_sw=(ld_st_op==6'b10_1011);wire mem_inst_lb;assign mem_inst_lb=(ld_st_op==6'b100000)|(ld_st_op==6'b100100);wire mem_inst_lh;assign mem_inst_lh=(ld_st_op==6'b100001)|(ld_st_op==6'b100101);assign mem_result=mem_inst_lw?data_sram_rdata: (mem_inst_lb&(new_lb_lw_lh==5'b1_1000))?{{24{data_sram_rdata[7]}},data_sram_rdata[7:0]}:(mem_inst_lb&(new_lb_lw_lh==5'b1_0100))?{{24{data_sram_rdata[15]}},data_sram_rdata[15:8]}:(mem_inst_lb&(new_lb_lw_lh==5'b1_0010))?{{24{data_sram_rdata[23]}},data_sram_rdata[23:16]}:(mem_inst_lb&(new_lb_lw_lh==5'b1_0001))?{{24{data_sram_rdata[31]}},data_sram_rdata[31:24]}:(mem_inst_lh&(new_lb_lw_lh==5'b1_1100))?{{16{data_sram_rdata[15]}},data_sram_rdata[15:0]}:(mem_inst_lh&(new_lb_lw_lh==5'b1_0011))?{{16{data_sram_rdata[31]}},data_sram_rdata[31:16]}:(mem_inst_lb&(new_lb_lw_lh==5'b0_1000))?{24'b0,data_sram_rdata[7:0]}:(mem_inst_lb&(new_lb_lw_lh==5'b0_0100))?{24'b0,data_sram_rdata[15:8]}:(mem_inst_lb&(new_lb_lw_lh==5'b0_0010))?{24'b0,data_sram_rdata[23:16]}:(mem_inst_lb&(new_lb_lw_lh==5'b0_0001))?{24'b0,data_sram_rdata[31:24]}:(mem_inst_lh&(new_lb_lw_lh==5'b0_1100))?{16'b0,data_sram_rdata[15:0]}:(mem_inst_lh&(new_lb_lw_lh==5'b0_0011))?{16'b0,data_sram_rdata[31:16]}:32'b0;assign rf_wdata = sel_rf_res ? mem_result : ex_result;assign mem_to_wb_bus = {mem_pc,     // 41:38rf_we,      // 37rf_waddr,   // 36:32rf_wdata    // 31:0};//Siriwire mem_to_rf_we;wire [4:0] mem_to_rf_waddr;wire [31:0] mem_to_rf_wdata;assign mem_to_rf_we =rf_we;assign mem_to_rf_waddr=rf_waddr;assign mem_to_rf_wdata=rf_wdata;assign mem_to_rf_bus={mem_to_rf_we,mem_to_rf_waddr,mem_to_rf_wdata};//Siriendmodule

WB模块

`include "lib/defines.vh"
module WB(input wire clk,//传入时钟周期input wire rst,//复位信号，负责初始化各项数据input wire [`StallBus-1:0] stall,//停止信号，负责暂停流水线input wire [`MEM_TO_WB_WD-1:0] mem_to_wb_bus,//MEM段到WB段的总线output wire [`WB_TO_RF_WD-1:0] wb_to_rf_bus,//WB段到ID段的总线//debug用来判断程序是否正确运行output wire [31:0] debug_wb_pc, // 当前的指令output wire [3:0] debug_wb_rf_wen,//当前的写入使能output wire [4:0] debug_wb_rf_wnum,//当前的写入地址output wire [31:0] debug_wb_rf_wdata //当前的写入数据// input wire flush,
);reg [`MEM_TO_WB_WD-1:0] mem_to_wb_bus_r;always @ (posedge clk) beginif (rst) beginmem_to_wb_bus_r <= `MEM_TO_WB_WD'b0;end// else if (flush) begin//     mem_to_wb_bus_r <= `MEM_TO_WB_WD'b0;// endelse if (stall[4]==`Stop && stall[5]==`NoStop) beginmem_to_wb_bus_r <= `MEM_TO_WB_WD'b0;endelse if (stall[4]==`NoStop) beginmem_to_wb_bus_r <= mem_to_wb_bus;endendwire [31:0] wb_pc;wire rf_we;wire [4:0] rf_waddr;wire [31:0] rf_wdata;assign {wb_pc,rf_we,rf_waddr,rf_wdata} = mem_to_wb_bus_r;// assign wb_to_rf_bus = mem_to_wb_bus_r[`WB_TO_RF_WD-1:0];assign wb_to_rf_bus = {rf_we,rf_waddr,rf_wdata};assign debug_wb_pc = wb_pc;assign debug_wb_rf_wen = {4{rf_we}};assign debug_wb_rf_wnum = rf_waddr;assign debug_wb_rf_wdata = rf_wdata;endmodule

regfile模块

`include "defines.vh"
module regfile(input wire clk,//读端口1input wire [4:0] raddr1,output wire [31:0] rdata1,//读端口2input wire [4:0] raddr2,output wire [31:0] rdata2,//写端口input wire we,input wire [4:0] waddr,input wire [31:0] wdata
);reg [31:0] reg_array [31:0];// writealways @ (posedge clk) beginif (we && waddr!=5'b0) begin //也就是we不为000000，waddr不为000000时。reg_array[waddr] <= wdata;endend// read out 1assign rdata1 = (raddr1 == 5'b0) ? 32'b0 : (raddr1==waddr)&&(we==1'b1)? wdata :reg_array[raddr1];// read out2assign rdata2 = (raddr2 == 5'b0) ? 32'b0 : (raddr2==waddr)&&(we==1'b1)? wdata :reg_array[raddr2];endmodule

mul.v模块

`include "..\defines.vh"
module mul (input wire clk,input wire resetn,input wire mul_signed, //signed is 1, unsigned is 0input wire [31:0] ina,input wire [31:0] inb,input wire start_i,output reg signed [63:0] result,output reg ready_o);
`define Signed 1'b1
`define UnSigned 1'b0reg [63:0] my_result;
reg [63:0] add_;
reg [31:0] ex_ina;
reg [31:0] ex_inb;
reg reverse;reg [62 :0] temp0;reg [61 :0] temp1;reg [60 :0] temp2;reg [59 :0] temp3;reg [58 :0] temp4;reg [57 :0] temp5;reg [56 :0] temp6;reg [55 :0] temp7;reg [54 :0] temp8;reg [53 :0] temp9;reg [52 :0] temp10;reg [51 :0] temp11;reg [50 :0] temp12;reg [49 :0] temp13;reg [48 :0] temp14;reg [47 :0] temp15;reg [46 :0] temp16;reg [45 :0] temp17;reg [44 :0] temp18;reg [43 :0] temp19;reg [42 :0] temp20;reg [41 :0] temp21;reg [40 :0] temp22;reg [39 :0] temp23;reg [38 :0] temp24;reg [37 :0] temp25;reg [36 :0] temp26;reg [35 :0] temp27;reg [34 :0] temp28;reg [33 :0] temp29;reg [32 :0] temp30;reg [31 :0] temp31;reg [63:0] out1_0;//reg [61:0] out1_1;reg [59:0] out1_2;reg [57:0] out1_3;reg [55:0] out1_4;reg [53:0] out1_5;reg [51:0] out1_6;reg [49:0] out1_7;reg [47:0] out1_8;reg [45:0] out1_9;reg [43:0] out1_10;reg [41:0] out1_11;reg [39:0] out1_12;reg [37:0] out1_13;reg [35:0] out1_14;reg [33:0] out1_15;reg [63:0] out2_0;reg [59:0] out2_1;reg [55:0] out2_2;reg [51:0] out2_3;reg [47:0] out2_4;reg [43:0] out2_5;reg [39:0] out2_6;reg [35:0] out2_7;reg [63:0] out3_0;reg [55:0] out3_1;reg [47:0] out3_2;reg [39:0] out3_3;reg [63:0] out4_0;reg [47:0] out4_1;reg [63:0]final_result;reg [2:0] count; // 32*1乘法器function [31:0] mut32_1;input [31:0] operand;input sel;beginmut32_1 = sel ? operand : 32'b0;endendfunctionalways @ (posedge clk) beginif (!resetn) begincount<=3'b0;ready_o <= `DivResultNotReady;temp0<=63'b0;temp1<=62'b0;temp2<=61'b0;temp3<=60'b0;temp4<=59'b0;temp5<=58'b0;temp6<=57'b0;temp7<=56'b0;temp8<=55'b0;temp9<=54'b0;temp10<=53'b0;temp11<=52'b0;temp12<=51'b0;temp13<=50'b0;temp14<=49'b0;temp15<=48'b0;temp16<=47'b0;temp17<=46'b0;temp18<=45'b0;temp19<=44'b0;temp20<=43'b0;temp21<=42'b0;temp22<=41'b0;temp23<=40'b0;temp24<=39'b0;temp25<=38'b0;temp26<=37'b0;temp27<=36'b0;temp28<=35'b0;temp29<=34'b0;temp30<=33'b0;temp31<=32'b0;endelse begincase (count)3'd0:beginif(start_i==1'b1)beginif (mul_signed==`UnSigned) beginex_ina<=ina;ex_inb<=inb;reverse<=1'b0;end else beginex_ina<=ina;ex_inb<=inb;if(ina[31]==1'b1) beginex_ina<=~(ina-1);endif (inb[31]==1'b1) beginex_inb<=~(inb-1);endreverse<=ina[31]+inb[31];endcount<=3'd1;endelse beginready_o <= `DivResultNotReady;result <= 64'b0;endend3'd1:begintemp31<=mut32_1(ex_ina,ex_inb[0]);temp30<=mut32_1(ex_ina,ex_inb[1])<<1;temp29<=mut32_1(ex_ina,ex_inb[2])<<2;temp28<=mut32_1(ex_ina,ex_inb[3])<<3;temp27<=mut32_1(ex_ina,ex_inb[4])<<4;temp26<=mut32_1(ex_ina,ex_inb[5])<<5;temp25<=mut32_1(ex_ina,ex_inb[6])<<6;temp24<=mut32_1(ex_ina,ex_inb[7])<<7;temp23<=mut32_1(ex_ina,ex_inb[8])<<8;temp22<=mut32_1(ex_ina,ex_inb[9])<<9;temp21<=mut32_1(ex_ina,ex_inb[10])<<10;temp20<=mut32_1(ex_ina,ex_inb[11])<<11;temp19<=mut32_1(ex_ina,ex_inb[12])<<12;temp18<=mut32_1(ex_ina,ex_inb[13])<<13;temp17<=mut32_1(ex_ina,ex_inb[14])<<14;temp16<=mut32_1(ex_ina,ex_inb[15])<<15;temp15<=mut32_1(ex_ina,ex_inb[16])<<16;temp14<=mut32_1(ex_ina,ex_inb[17])<<17;temp13<=mut32_1(ex_ina,ex_inb[18])<<18;temp12<=mut32_1(ex_ina,ex_inb[19])<<19;temp11<=mut32_1(ex_ina,ex_inb[20])<<20;temp10<=mut32_1(ex_ina,ex_inb[21])<<21;temp9<=mut32_1(ex_ina,ex_inb[22])<<22;temp8<=mut32_1(ex_ina,ex_inb[23])<<23;temp7<=mut32_1(ex_ina,ex_inb[24])<<24;temp6<=mut32_1(ex_ina,ex_inb[25])<<25;temp5<=mut32_1(ex_ina,ex_inb[26])<<26;temp4<=mut32_1(ex_ina,ex_inb[27])<<27;temp3<=mut32_1(ex_ina,ex_inb[28])<<28;temp2<=mut32_1(ex_ina,ex_inb[29])<<29;temp1<=mut32_1(ex_ina,ex_inb[30])<<30;temp0<=mut32_1(ex_ina,ex_inb[31])<<31;count<=3'd2;// ready_o<=1'b0;end3'd2:beginout1_0  <= temp0+temp1;out1_1  <= temp2+temp3;out1_2  <= temp4+temp5;out1_3  <= temp6+temp7;out1_4  <= temp8+temp9;out1_5  <= temp10+temp11;out1_6  <= temp12+temp13;out1_7  <= temp14+temp15;out1_8  <= temp16+temp17;out1_9  <= temp18+temp19;out1_10  <= temp20+temp21;out1_11  <= temp22+temp23;out1_12  <= temp24+temp25;out1_13  <= temp26+temp27;out1_14  <= temp28+temp29;out1_15  <= temp30+temp31;count<=3'd3;// ready_o<=1'b0;end3'd3:beginout2_0  <= out1_0+out1_1;out2_1  <= out1_2+out1_3;out2_2  <= out1_4+out1_5;out2_3  <= out1_6+out1_7;out2_4  <= out1_8+out1_9;out2_5  <= out1_10+out1_11;out2_6  <= out1_12+out1_13;out2_7  <= out1_14+out1_15;count<=3'd4;// ready_o<=1'b0;end3'd4:beginout3_0 <= out2_0+out2_1;out3_1 <= out2_2+out2_3;out3_2 <= out2_4+out2_5;out3_3 <= out2_6+out2_7;count <= 3'd5;// ready_o<=1'b0;end3'd5:beginout4_0 <= out3_0+out3_1;out4_1 <= out3_2+out3_3;count<=3'd6;// ready_o<=1'b0;end3'd6:beginfinal_result<=out4_0+out4_1;count<=3'd7;// ready_o<=1'b0;end3'd7:beginresult<=reverse?~(final_result)+1'b1:final_result;// count<=3'd0;ready_o <= `DivResultReady;if (start_i == `DivStop) begincount <= 3'b0;ready_o <= `DivResultNotReady;result <= {`ZeroWord,`ZeroWord};endendendcase end
end
endmodule

参照《自己动手做CPU》自己动手做CPU相关推荐

动手给自己的Blog做了个整容手术，决定在CSDN上安家了
动手给自己的Blog做了个整容手术,决定在CSDN上安家了使用CSDN Blog已经差不多1年半的时间了,但是CSDN 给我的感觉却很不好,很不稳定,在这1年半的时间的里面,CSDN 的Blog没有 ...
虚拟机服务器多线程设置,cpu核数线程做虚拟机
cpu核数线程做虚拟机内容精选换一换在服务器上运行多个虚拟机,每台虚拟机的业务不同,造成不同程度的资源占用,对于存储IO密集型的虚拟机,为了避免相邻的虚拟机的干扰,需要将不同虚拟机处理IO的存储 ...
“做中学学中做”教学模式在计算机基础教学中的应用探索
"做中学学中做"方法在教学活动中尊重学生的个性差异,强调学生认知中的经验与交往,使学生成为学习的主体,让学生亲身经历探究自然的过程,在观察.提问.设想.动手实验.表达.交流的探究活 ...
时间计算题100道_时间不够用？题目做不完？做题攻略和时间分配来啦
来源微信公众号硬核考研每天免费分享考研资料各位同学们,大家晚上好呀! 10月还剩下了一个小尾巴,不知道大家在做真题时的时间怎样分配,很多考研儿们都会有时间不够用,题目做不完的烦恼.今天小编就来给大 ...
Mars 是什么、能做什么、如何做的——记 Mars 在 PyCon China 2018 上的分享
最近,在 PyCon China 2018 的北京主会场.成都和杭州分会场都分享了我们最新的工作 Mars,基于矩阵的统一计算框架.本文会以文字的形式对 PyCon 中国上的分享再进行一次阐述. 听到 ...
Mars 是什么、能做什么、如何做的——记 Mars 在 PyCon China 2018 上的分享...
最近,在 PyCon China 2018 的北京主会场.成都和杭州分会场都分享了我们最新的工作 Mars,基于矩阵的统一计算框架.本文会以文字的形式对 PyCon 中国上的分享再进行一次阐述. 听到 ...
什么是接口自动化？为什么要做？和怎么做接口自动化？
目录 1.服务端接口测试介绍什么是服务端? 2.什么是接口? 3.什么是接口测试? 4.为什么要做接口测试? 5.如何做接口测试? 6.接口测试自动化介绍什么是接口测试自动化? 7.为什么要做接口 ...
nodejs 解析http_如何在NodeJS中大规模解析PDF：做什么和不做什么
nodejs 解析http by Tom 由汤姆如何在NodeJS中大规模解析PDF:做什么和不做什么 (How to parse PDFs at scale in NodeJS: what to ...
央行发布论文：区块链能做什么，不能做什么？
来源:悟空智能科央行发布工作论文<区块链能做什么.不能做什么?>,论文称,不要夸大或迷信区块链的功能.区块链应用要立足实际情况.目前区块链投融资领域泡沫明显. 论文从经济学角度研究了区块 ...
西文是指什么_儒家君子文化：何为君子？为什么要做君子，而不做小人？
引导语:中华传统美德是中华文化的精髓,君子文化是中华传统美德的集中体现.所以研究君子文化就是对中华传统美德的弘扬,就是对中华传统文化精髓的挖掘,就是对中华民族深沉的精神追求.根本的精神基因.独特的精神 ...

参照《自己动手做CPU》自己动手做CPU

文件关系

代码

流程图

IF模块

ID模块

MEM模块

WB模块

regfile模块

mul.v模块

参照《自己动手做CPU》自己动手做CPU相关推荐

最新文章

热门文章