AES128加密解密

之前工作项目要求对文件数据要进行解密处理，而且必须是AES128算法，然后自己去找资料熟悉该算法和流程，以及具体怎么实现的。由于只能对16字节进行处理，所以我对文件进行拆分，将大文件拆为多个小文件，利用多线程去处理文件，加快算法处理。最后功能还是比较耗时，暂时没想到合适的解决方法，注意：该算法在32位操作系统和64位操作系统处理时间有快慢。我这边也有一个验证解密加密是否正确的小插件。需要可以私信。

AES128加密解密的主要操作算法代码

Aes128加密解密，每轮只能对16字节进行处理；
16字节密钥也是最重要的；
加密流程：轮密钥加、字节代替、行移位、列混淆；
解密流程：轮密钥加、逆向字节代替、逆向行移位、逆向列混淆；
流程进行10轮；
16字节密钥还要进行扩展密钥处理；
具体原理操作流程后续补充。

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "aes.h"
/*** S盒*/
static const int S[16][16] = { 0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5, 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76,0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0, 0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0,0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc, 0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15,0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a, 0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75,0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0, 0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84,0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b, 0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf,0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85, 0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8,0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5, 0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2,0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17, 0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73,0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88, 0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb,0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c, 0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79,0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9, 0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08,0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6, 0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a,0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e, 0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e,0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94, 0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf,0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68, 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16 };/*** 逆S盒*/
static const int S2[16][16] = { 0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38, 0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb,0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87, 0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb,0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d, 0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e,0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2, 0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25,0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16, 0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92,0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda, 0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84,0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a, 0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06,0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02, 0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b,0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea, 0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73,0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85, 0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e,0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89, 0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b,0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20, 0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4,0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31, 0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f,0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d, 0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef,0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0, 0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61,0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26, 0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d };/*** 获取整形数据的低8位的左4个位*/
static int getLeft4Bit(int num) {int left = num & 0x000000f0;return left >> 4;
}/*** 获取整形数据的低8位的右4个位*/
static int getRight4Bit(int num) {return num & 0x0000000f;
}
/*** 根据索引，从S盒中获得元素*/
static int getNumFromSBox(int index) {int row = getLeft4Bit(index);int col = getRight4Bit(index);return S[row][col];
}/*** 把一个字符转变成整型*/
static int getIntFromChar(char c) {int result = (int)c;return result & 0x000000ff;
}/*** 把16个字符转变成4X4的数组，* 该矩阵中字节的排列顺序为从上到下，* 从左到右依次排列。*/
static void convertToIntArray(char* str, int pa[4][4]) {int k = 0;int i, j;for (i = 0; i < 4; i++)for (j = 0; j < 4; j++) {pa[j][i] = getIntFromChar(str[k]);k++;}
}/*** 打印4X4的数组*/
static void printArray(int a[4][4]) {int i, j;for (i = 0; i < 4; i++) {for (j = 0; j < 4; j++)printf("a[%d][%d] = 0x%x ", i, j, a[i][j]);printf("\n");}printf("\n");
}/*** 打印字符串的ASSCI，* 以十六进制显示。*/
static void printASSCI(char* str, int len) {int i;for (i = 0; i < len; i++)printf("0x%x ", getIntFromChar(str[i]));printf("\n");
}/*** 把连续的4个字符合并成一个4字节的整型*/
static int getWordFromStr(char* str) {int one, two, three, four;one = getIntFromChar(str[0]);one = one << 24;two = getIntFromChar(str[1]);two = two << 16;three = getIntFromChar(str[2]);three = three << 8;four = getIntFromChar(str[3]);return one | two | three | four;
}/*** 把一个4字节的数的第一、二、三、四个字节取出，* 入进一个4个元素的整型数组里面。*/
static void splitIntToArray(int num, int array[4]) {int one, two, three;one = num >> 24;array[0] = one & 0x000000ff;two = num >> 16;array[1] = two & 0x000000ff;three = num >> 8;array[2] = three & 0x000000ff;array[3] = num & 0x000000ff;
}/*** 将数组中的元素循环左移step位*/
static void leftLoop4int(int array[4], int step) {int temp[4];int i;int index;for (i = 0; i < 4; i++)temp[i] = array[i];index = step % 4 == 0 ? 0 : step % 4;for (i = 0; i < 4; i++) {array[i] = temp[index];index++;index = index % 4;}
}/*** 把数组中的第一、二、三和四元素分别作为* 4字节整型的第一、二、三和四字节，合并成一个4字节整型*/
static int mergeArrayToInt(int array[4]) {int one = array[0] << 24;int two = array[1] << 16;int three = array[2] << 8;int four = array[3];return one | two | three | four;
}/*** 常量轮值表*/
static const int Rcon[10] = { 0x01000000, 0x02000000,0x04000000, 0x08000000,0x10000000, 0x20000000,0x40000000, 0x80000000,0x1b000000, 0x36000000 };
/*** 密钥扩展中的T函数*/
static int T(int num, int round) {int numArray[4];int i;int result;splitIntToArray(num, numArray);leftLoop4int(numArray, 1);//字循环//字节代换for (i = 0; i < 4; i++)numArray[i] = getNumFromSBox(numArray[i]);result = mergeArrayToInt(numArray);return result ^ Rcon[round];
}//密钥对应的扩展数组
static int w[44];
/*** 打印W数组*/
static void printW() {int i, j;for (i = 0, j = 1; i < 44; i++, j++) {printf("w[%d] = 0x%x ", i, w[i]);if (j % 4 == 0)printf("\n");}printf("\n");
}/*** 扩展密钥，结果是把w[44]中的每个元素初始化*/
static void extendKey(char* key) {int i, j;for (i = 0; i < 4; i++)w[i] = getWordFromStr(key + i * 4);for (i = 4, j = 0; i < 44; i++) {if (i % 4 == 0) {w[i] = w[i - 4] ^ T(w[i - 1], j);j++;//下一轮}else {w[i] = w[i - 4] ^ w[i - 1];}}}/*** 轮密钥加*/
static void addRoundKey(int array[4][4], int round) {int warray[4];int i, j;for (i = 0; i < 4; i++) {splitIntToArray(w[round * 4 + i], warray);for (j = 0; j < 4; j++) {array[j][i] = array[j][i] ^ warray[j];}}
}/*** 字节代换*/
static void subBytes(int array[4][4]) {int i, j;for (i = 0; i < 4; i++)for (j = 0; j < 4; j++)array[i][j] = getNumFromSBox(array[i][j]);
}/*** 行移位*/
static void shiftRows(int array[4][4]) {int rowTwo[4], rowThree[4], rowFour[4];int i;for (i = 0; i < 4; i++) {rowTwo[i] = array[1][i];rowThree[i] = array[2][i];rowFour[i] = array[3][i];}leftLoop4int(rowTwo, 1);leftLoop4int(rowThree, 2);leftLoop4int(rowFour, 3);for (i = 0; i < 4; i++) {array[1][i] = rowTwo[i];array[2][i] = rowThree[i];array[3][i] = rowFour[i];}
}/*** 列混合要用到的矩阵*/
static const int colM[4][4] = { 2, 3, 1, 1,1, 2, 3, 1,1, 1, 2, 3,3, 1, 1, 2 };static int GFMul2(int s) {int result = s << 1;int a7 = result & 0x00000100;if (a7 != 0) {result = result & 0x000000ff;result = result ^ 0x1b;}return result;
}static int GFMul3(int s) {return GFMul2(s) ^ s;
}static int GFMul4(int s) {return GFMul2(GFMul2(s));
}static int GFMul8(int s) {return GFMul2(GFMul4(s));
}static int GFMul9(int s) {return GFMul8(s) ^ s;
}static int GFMul11(int s) {return GFMul9(s) ^ GFMul2(s);
}static int GFMul12(int s) {return GFMul8(s) ^ GFMul4(s);
}static int GFMul13(int s) {return GFMul12(s) ^ s;
}static int GFMul14(int s) {return GFMul12(s) ^ GFMul2(s);
}/*** GF上的二元运算*/
static int GFMul(int n, int s) {int result;if (n == 1)result = s;else if (n == 2)result = GFMul2(s);else if (n == 3)result = GFMul3(s);else if (n == 0x9)result = GFMul9(s);else if (n == 0xb)//11result = GFMul11(s);else if (n == 0xd)//13result = GFMul13(s);else if (n == 0xe)//14result = GFMul14(s);return result;
}
/*** 列混合*/
static void mixColumns(int array[4][4]) {int tempArray[4][4];int i, j;for (i = 0; i < 4; i++)for (j = 0; j < 4; j++)tempArray[i][j] = array[i][j];for (i = 0; i < 4; i++)for (j = 0; j < 4; j++) {array[i][j] = GFMul(colM[i][0], tempArray[0][j]) ^ GFMul(colM[i][1], tempArray[1][j])^ GFMul(colM[i][2], tempArray[2][j]) ^ GFMul(colM[i][3], tempArray[3][j]);}
}
/*** 把4X4数组转回字符串*/
static void convertArrayToStr(int array[4][4], char* str) {int i, j;for (i = 0; i < 4; i++)for (j = 0; j < 4; j++)*str++ = (char)array[j][i];
}
/*** 检查密钥长度*/
static int checkKeyLen(int len) {if (len == 16)return 1;elsereturn 0;
}/*** 参数 p: 明文的字符串数组。* 参数 plen: 明文的长度。* 参数 key: 密钥的字符串数组。*/
void aes(char* p, int plen, char* key) {int keylen = strlen(key);int pArray[4][4];int k, i;if (plen == 0 || plen % 16 != 0) {printf("明文字符长度必须为16的倍数！\n");exit(0);}if (!checkKeyLen(keylen)) {printf("密钥字符长度错误！长度必须为16。当前长度为%d\n", keylen);exit(0);}extendKey(key);//扩展密钥for (k = 0; k < plen; k += 16) {convertToIntArray(p + k, pArray);addRoundKey(pArray, 0);//一开始的轮密钥加for (i = 1; i < 10; i++) {subBytes(pArray);//字节代换shiftRows(pArray);//行移位mixColumns(pArray);//列混合addRoundKey(pArray, i);}subBytes(pArray);//字节代换shiftRows(pArray);//行移位addRoundKey(pArray, 10);convertArrayToStr(pArray, p + k);}
}
/*** 根据索引从逆S盒中获取值*/
static int getNumFromS1Box(int index) {int row = getLeft4Bit(index);int col = getRight4Bit(index);return S2[row][col];
}
/*** 逆字节变换*/
static void deSubBytes(int array[4][4]) {int i, j;for (i = 0; i < 4; i++)for (j = 0; j < 4; j++)array[i][j] = getNumFromS1Box(array[i][j]);
}
/*** 把4个元素的数组循环右移step位*/
static void rightLoop4int(int array[4], int step) {int temp[4];int i;int index;for (i = 0; i < 4; i++)temp[i] = array[i];index = step % 4 == 0 ? 0 : step % 4;index = 3 - index;for (i = 3; i >= 0; i--) {array[i] = temp[index];index--;index = index == -1 ? 3 : index;}
}/*** 逆行移位*/
static void deShiftRows(int array[4][4]) {int rowTwo[4], rowThree[4], rowFour[4];int i;for (i = 0; i < 4; i++) {rowTwo[i] = array[1][i];rowThree[i] = array[2][i];rowFour[i] = array[3][i];}rightLoop4int(rowTwo, 1);rightLoop4int(rowThree, 2);rightLoop4int(rowFour, 3);for (i = 0; i < 4; i++) {array[1][i] = rowTwo[i];array[2][i] = rowThree[i];array[3][i] = rowFour[i];}
}
/*** 逆列混合用到的矩阵*/
static const int deColM[4][4] = { 0xe, 0xb, 0xd, 0x9,0x9, 0xe, 0xb, 0xd,0xd, 0x9, 0xe, 0xb,0xb, 0xd, 0x9, 0xe };/*** 逆列混合*/
static void deMixColumns(int array[4][4]) {int tempArray[4][4];int i, j;for (i = 0; i < 4; i++)for (j = 0; j < 4; j++)tempArray[i][j] = array[i][j];for (i = 0; i < 4; i++)for (j = 0; j < 4; j++) {array[i][j] = GFMul(deColM[i][0], tempArray[0][j]) ^ GFMul(deColM[i][1], tempArray[1][j])^ GFMul(deColM[i][2], tempArray[2][j]) ^ GFMul(deColM[i][3], tempArray[3][j]);}
}
/*** 把两个4X4数组进行异或*/
static void addRoundTowArray(int aArray[4][4], int bArray[4][4]) {int i, j;for (i = 0; i < 4; i++)for (j = 0; j < 4; j++)aArray[i][j] = aArray[i][j] ^ bArray[i][j];
}
/*** 从4个32位的密钥字中获得4X4数组，* 用于进行逆列混合*/
static void getArrayFrom4W(int i, int array[4][4]) {int index, j;int colOne[4], colTwo[4], colThree[4], colFour[4];index = i * 4;splitIntToArray(w[index], colOne);splitIntToArray(w[index + 1], colTwo);splitIntToArray(w[index + 2], colThree);splitIntToArray(w[index + 3], colFour);for (j = 0; j < 4; j++) {array[j][0] = colOne[j];array[j][1] = colTwo[j];array[j][2] = colThree[j];array[j][3] = colFour[j];}}/*** 参数 c: 密文的字符串数组。* 参数 clen: 密文的长度。* 参数 key: 密钥的字符串数组。*/
void deAes(char* c, int clen, char* key) {int cArray[4][4];int keylen, k;keylen = strlen(key);if (clen == 0 || clen % 16 != 0) {printf("密文字符长度必须为16的倍数！现在的长度为%d\n", clen);exit(0);}if (!checkKeyLen(keylen)) {printf("密钥字符长度错误！长度必须为16、24和32。当前长度为%d\n", keylen);exit(0);}extendKey(key);//扩展密钥for (k = 0; k < clen; k += 16) {int i;int wArray[4][4];convertToIntArray(c + k, cArray);addRoundKey(cArray, 10);for (i = 9; i >= 1; i--) {deSubBytes(cArray);deShiftRows(cArray);deMixColumns(cArray);getArrayFrom4W(i, wArray);deMixColumns(wArray);addRoundTowArray(cArray, wArray);}deSubBytes(cArray);deShiftRows(cArray);addRoundKey(cArray, 0);convertArrayToStr(cArray, c + k);}
}

AES128加密解密相关推荐

AES-128加密解密方式(逐步更新)
@AES-128加密解密方式慢慢钻研也在慢慢更新前言说一下,本人小白起步,断断续续的学习Python,慢慢的垒代码,持续学习中.部分内容,可能是直接找到网上内容来使用的,请大家勿喷,感谢. 由于最 ...
AES128加密/解密(单片机可用)
通过网上代码进行修改,将输入输出缓冲区复用,降低内存消耗,使用需要注意的是,加密数据长度可以不是16字节整数倍,但是缓冲区必须是16字节整数倍,不足部分会自动补充0,解密数据长度必须是16的整数倍; ...
java aes128加密解密_java AES 128 位加密解密算法
最近在做app后台的服务器,使用到AES加密解密算法,无奈网上的都不符合要求,于是自己借鉴着写了一个AES加密解密工具. 密钥长度问题默认 Java 中仅支持 128 位密钥,当使用 256 位密钥 ...
android java加密_Android、iOS和Java通用的AES128加密解密示例代码
前言移动端越来越火了,我们在开发过程中,总会碰到要和移动端打交道的场景,比如android和iOS的打交道.为了让数据交互更安全,我们需要对数据进行加密传输. 这篇文章给大家分享AES的加密和解密. ...
AES128加密解密以及参数的处理
/*** AES加密实现方法*/public static byte[] AESEncrypt(byte[] plainBytes, byte[] keyBytes, String keyAlgori ...
AES128加密解密以及遇到的问题
由于工作需求,需要对一个字符串进行加密与解密的操作,自己在网上查了一下,发现AES对称加密算法非常符合我的需求.它的简单思路就是事先设置一个秘钥(比如放在配置文件中),然后根据这个秘钥对字符串进行加密 ...
ios java aes128_iOS AES128加密解密的两种模式(CBC和ECB)
原理什么的不在本篇的范畴,网上很多大牛总结的很好了请参考AES加密过程详解 1. 苹果默认是CBC模式的,有文档为证: /*! @enum CCOptions @abstract Options f ...
AES CBC加密/解密
简介高级加密标准(英语:Advanced Encryption Standard,缩写:AES),在密码学中又称Rijndael加密法,是美国联邦政府采用的一种区块加密标准.这个标准用来替代原先的D ...
java aes cfb 256_aes加密解密源码，包括aes128、aes192、aes256位，以及cbc、cfb、ecb、ofb、pcbc模式...
AES加解密总共有以下这些算法/模式/填充字节加密后数据长度不满16字节加密后长度 AES/CBC/NoPadding ...

AES128加密解密

AES128加密解密的主要操作算法代码

AES128加密解密相关推荐

最新文章

热门文章