mcdata交换机笔记

Root> show zoning
  当然也可以用show all来查看所有的信息
  查看当前信息（习惯行的，可不做，只是为啦保存下当前的配置信息）
  Root> config zoning showActive
2.添加zone
  2.1首先Root> config zoning replaceZoneSet
  当然上面这不也可以不做原因如下：
  There are 2 ‘configure areas’ in the switch, the ‘Active’ and the ‘Pending’, you can’t

edit the Active zoneset directly, all your changes are made to the ‘Pending’ or named “Work

Area”, but this 2 ‘areas ’ are NOT always the same, so it’s better to let the pending work

area be same with the Active configuration
  2.2 添加zone
      Root> config zoning
      Config.Zoning> addzone xx__eva_sma
  2.3 将一个port成员加入到zone1中：
       Config.Zoning> addPortMem zone1 1 26
       该命令将domain ID为1的交换机上的26端口划入zone1中。
       将一个WWN成员加入到zone1中：
       Config.Zoning> addwwnMem zone1 50:06:0b:00:00:27:11:78
       或者直接Root> config zoning addWwnMem TheUltimateZone 10:00:00:00:C9:22:9B:64
       从一个zone中删除一个端口
       deletePortMem xx__eva_sma 11 141
       deletePortMem xx__eva_sma 11 142
       deletePortMem xx__eva_sma 11 140
  2.4 激活zone配置：
          Config.Zoning> activatezoneset
      或者 Root> config zoning activateZoneSet
  2.5 检查zone状态
          Config.Zoning> showactive
  2.6  通过此命令可查找到連接到该交換机设备的wwn号
        Root> show port status   
  2.7 删除zone
      Root> config zoning deleteZone TheLeastUltimateZone
  
  M-SERIES (McDATA) COMMANDS

M-SERIES  Switch Commands   
View=                      config ip show
Config ip                          (new IP and Subnet mask)
Show switch   
Show switch   
Show  system   
Show nameserver   
Show loginServer   
Show nameServer   
Show.Fabric nodes   
Maint  system  setOnlineState

M-SERIES  Zoning Commands   
Config.Zoning addWwnMem zoneName wwn   
Config.Zoning addZone              add a new zone to the working area
Config.Zoning activateZoneset              activation of changes
Config.Zoning showactive              shows actively connected running zoneset
Config.Zoning clearZone              clear WWNs in a zone
Config.Zoning deletezone              remove zone from the running config
Config.Zoning showPending              show pending zones
Config.Zoning renameZoneoldzonenamenewzonename   
Config.Zoning deleteWwnMem             zonenamewwn
Config.Zoning renameZoneSet             zoneSetName