STM32f103——ILI9341

STM32f103 —— ILI9341

#ifndef ILI9341_H_
#define ILI9341_H_#include "type.h"//====================================TFT ILI9341=====================================
#define ILI9341_SPI          SPI1#define ILI9341_MOSI_GRP     GPIOA
#define ILI9341_MOSI_IDX     GPIO_Pin_7
#define ILI9341_MOSI_LOW()   GPIO_ResetBits(ILI9341_MOSI_GRP, ILI9341_MOSI_IDX)
#define ILI9341_MOSI_HIGH()  GPIO_SetBits(ILI9341_MOSI_GRP, ILI9341_MOSI_IDX)#define ILI9341_RS_GRP       GPIOA
#define ILI9341_RS_IDX       GPIO_Pin_3
#define ILI9341_RS_LOW()     GPIO_ResetBits(ILI9341_RS_GRP, ILI9341_RS_IDX)
#define ILI9341_RS_HIGH()    GPIO_SetBits(ILI9341_RS_GRP, ILI9341_RS_IDX)#define ILI9341_CS_GRP       GPIOA
#define ILI9341_CS_IDX       GPIO_Pin_4
#define ILI9341_CS_LOW()     GPIO_ResetBits(ILI9341_CS_GRP, ILI9341_CS_IDX)
#define ILI9341_CS_HIGH()    GPIO_SetBits(ILI9341_CS_GRP, ILI9341_CS_IDX)#define ILI9341_CLK_GRP      GPIOA
#define ILI9341_CLK_IDX      GPIO_Pin_5
#define ILI9341_CLK_LOW()    GPIO_ResetBits(ILI9341_CLK_GRP, ILI9341_CS_IDX)
#define ILI9341_CLK_HIGH()   GPIO_SetBits(ILI9341_CLK_IDX, ILI9341_CS_IDX)#define ILI9341_ENLED_GRP    GPIOB
#define ILI9341_ENLED_IDX    GPIO_Pin_2
#define ILI9341_ENLED_LOW()  GPIO_ResetBits(ILI9341_ENLED_GRP, ILI9341_ENLED_IDX)
#define ILI9341_ENLED_HIGH() GPIO_SetBits(ILI9341_ENLED_GRP, ILI9341_ENLED_IDX)#define ILI9341_RESET_GRP    GPIOB
#define ILI9341_RESET_IDX    GPIO_Pin_0
#define ILI9341_RESET_LOW()  GPIO_ResetBits(ILI9341_RESET_GRP, ILI9341_RESET_IDX)
#define ILI9341_RESET_HIGH() GPIO_SetBits(ILI9341_RESET_GRP, ILI9341_RESET_IDX)void ILI9341Config(void);
void ILI9341SetCursor(uint16_t x, uint16_t y);
void ILI9341SetColor(uint16_t rgb565);
void ILI9341WriteData(uint8_t high,uint8_t low);

#include "ili9341.h"
#include "delay.h"/* ILI9341液晶的SPI GPIO初始化 */
static void ili9341_spi_init(SPI_TypeDef* SPIx, uint16_t spi_baud_div)
{SPI_InitTypeDef SPI_InitStructure;GPIO_InitTypeDef GPIO_InitStructure;RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB, ENABLE);RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE);/* clk和mosi是复用功能，其它引脚是通用推挽输出 */GPIO_InitStructure.GPIO_Pin  = ILI9341_MOSI_IDX | ILI9341_CLK_IDX;GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;GPIO_Init(ILI9341_MOSI_GRP, &GPIO_InitStructure);GPIO_InitStructure.GPIO_Pin  = ILI9341_CS_IDX | ILI9341_RS_IDX;GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;GPIO_Init(ILI9341_CS_GRP, &GPIO_InitStructure);GPIO_InitStructure.GPIO_Pin  = ILI9341_ENLED_IDX | ILI9341_RESET_IDX;GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;GPIO_Init(ILI9341_RESET_GRP, &GPIO_InitStructure);SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;SPI_InitStructure.SPI_Mode = SPI_Mode_Master;SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_8;SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;SPI_InitStructure.SPI_CRCPolynomial = 7;SPI_Init(SPIx, &SPI_InitStructure);SPI_Cmd(SPIx, ENABLE);
}static void ili9341_spi_config(void)
{ili9341_spi_init(ILI9341_SPI, 0x02);ILI9341_ENLED_HIGH(); /* 点亮LCD */ILI9341_CS_HIGH();    /* 关闭失能cs */ILI9341_RESET_HIGH(); /* 复位引脚制高失能 */ILI9341_RS_HIGH();    /* RS制高 */
}/* spi读写数据 */
static uint8_t ili9341_read_write_byte(uint8_t data)
{while (SPI_I2S_GetFlagStatus(ILI9341_SPI, SPI_I2S_FLAG_TXE) == RESET);SPI_I2S_SendData(ILI9341_SPI, data); while (SPI_I2S_GetFlagStatus(ILI9341_SPI, SPI_I2S_FLAG_RXNE) == RESET);return SPI_I2S_ReceiveData(ILI9341_SPI); //返回通过SPIx最近接收的数据
}/* 写命令 */
static void ili9341_cmd_write(uint8_t cmd)
{ILI9341_RS_LOW();ILI9341_CS_LOW();ili9341_read_write_byte(cmd);ILI9341_CS_HIGH();
}/* 写数据 */
static void ili9341_data_write(uint8_t data)
{ILI9341_RS_HIGH();ILI9341_CS_LOW();ili9341_read_write_byte(data);ILI9341_CS_HIGH();
}/* 写16位数据 */
void ili9341_data_wtite_16(uint8_t high, uint8_t low)
{ILI9341_RS_HIGH();ILI9341_CS_LOW();ili9341_read_write_byte(high);ILI9341_CS_HIGH();ILI9341_RS_HIGH();ILI9341_CS_LOW();ili9341_read_write_byte(low);ILI9341_CS_HIGH();
}/* 初始化9341液晶，根据手册时序 */
static void ili9341_init(void)
{ILI9341_RESET_LOW();delay_ms(10);ILI9341_RESET_HIGH();delay_ms(120);//************* Start Initial Sequence **********//ili9341_cmd_write(0xCB);ili9341_data_write (0x39);ili9341_data_write (0x2C);ili9341_data_write (0x00);ili9341_data_write (0x34);ili9341_data_write (0x02);ili9341_cmd_write(0xCF);ili9341_data_write (0x00);ili9341_data_write (0xC1);ili9341_data_write (0X30);ili9341_cmd_write(0xE8);ili9341_data_write (0x85);ili9341_data_write (0x00);ili9341_data_write (0x78);ili9341_cmd_write(0xEA);ili9341_data_write (0x00);ili9341_data_write (0x00);ili9341_cmd_write(0xED);ili9341_data_write (0x64);ili9341_data_write (0x03);ili9341_data_write (0X12);ili9341_data_write (0X81);ili9341_cmd_write(0xF7);ili9341_data_write(0x20);ili9341_cmd_write(0xC0);    // Power controlili9341_data_write (0x23);  // VRH[5:0]ili9341_cmd_write(0xC1);    // Power controlili9341_data_write (0x10);  // SAP[2:0];BT[3:0]ili9341_cmd_write(0xC5);    // VCM controlili9341_data_write (0x3e);ili9341_data_write (0x28);ili9341_cmd_write(0xC7);    // VCM control2ili9341_data_write (0X86);ili9341_cmd_write(0x36);    // Memory Access Controlili9341_data_write (0xe8);ili9341_cmd_write(0X2A);ili9341_data_write(0x00);   // startili9341_data_write(0x00);ili9341_data_write(0x01);   // endili9341_data_write(0x3F);ili9341_cmd_write(0X2B);ili9341_data_write(0x00);   // startili9341_data_write(0x00);ili9341_data_write(0x00);   // endili9341_data_write(0xEF);ili9341_cmd_write(0x3A);ili9341_data_write (0x55);ili9341_cmd_write(0xB1);ili9341_data_write (0x00);ili9341_data_write (0x18);ili9341_cmd_write(0xB6);    // Display Function Controlili9341_data_write (0x08);ili9341_data_write (0x82);ili9341_data_write (0x27);ili9341_cmd_write(0xF2);    // 3Gamma Function Disableili9341_data_write (0x00);ili9341_cmd_write(0x26);    // Gamma curve selectedili9341_data_write (0x01);ili9341_cmd_write(0xE0);    // Set Gammaili9341_data_write (0x0F);ili9341_data_write (0x31);ili9341_data_write (0x2b);ili9341_data_write (0x0c);ili9341_data_write (0x0e);ili9341_data_write (0x08);ili9341_data_write (0x4e);ili9341_data_write (0Xf1);ili9341_data_write (0x37);ili9341_data_write (0x07);ili9341_data_write (0x10);ili9341_data_write (0x03);ili9341_data_write (0x0e);ili9341_data_write (0x09);ili9341_data_write (0x00);ili9341_cmd_write(0XE1);    // Set Gammaili9341_data_write (0x00);ili9341_data_write (0x0e);ili9341_data_write (0x14);ili9341_data_write (0x03);ili9341_data_write (0x11);ili9341_data_write (0x07);ili9341_data_write (0x31);ili9341_data_write (0xc1);ili9341_data_write (0x48);ili9341_data_write (0x08);ili9341_data_write (0x0f);ili9341_data_write (0x0C);ili9341_data_write (0x31);ili9341_data_write (0x36);ili9341_data_write (0x0f);ili9341_cmd_write(0x11);    // Exit Sleepdelay_ms(120);ili9341_cmd_write(0x29);    // Display onili9341_cmd_write(0x2c);
}//=================================================================
/* ILI9341配置:GPIO配置，液晶初始化 */
void ILI9341Config(void)
{ili9341_spi_config(); /* 配置ILI9341GPIO和点亮屏 */ili9341_init();       /* ILI9341液晶初始化 */
}void ILI9341SetColor(uint16_t rgb565)
{uint8_t H;uint8_t L;H = (rgb565 & 0xFF00) >> 8;L = (rgb565 & 0x00FF);WatchdogFeed();ili9341_data_wtite_16(H, L);
}void ILI9341SetCursor(uint16_t x, uint16_t y)
{ili9341_cmd_write(0x2a);ili9341_data_wtite_16(x >> 8, x);ili9341_cmd_write(0x2b);ili9341_data_wtite_16(y >> 8, y);ili9341_cmd_write(0x2c);
}void ILI9341WriteData(uint8_t high, uint8_t low)
{ili9341_data_wtite_16(high, low);
}

struct grap_char
{uint16_t x1; /*字的起始位置的X轴*/uint16_t y1; /*字的起始位置的Y轴*/uint8_t code[2]; /*要显示的内容*/uint16_t rgb565; /*显示的前景色*/uint16_t blkrgb565; /*显示的背景色*/
}; // 描点int grap_xy(int16_t x1, int16_t y1, int16_t x2, int16_t y2, int16_t blkrgb565) // 刷屏
{int16_t i;int16_t j;if (y2 > MAX_POSY ||x2 > MAX_POSX ||x1 > MAX_POSX ||y1 > MAX_POSY ||x1 >= x2 ||y1 > y2){return 0;}for (j = y1; j < y2; j++){ILI9341SetCursor(x1, j);for (i = x1; i < x2; i++){ILI9341SetColor(blkrgb565);}}return 1;
}

STM32f103——ILI9341相关推荐

基于STM32F103的液晶显示电子钟
摘要: 随着自动化和物联网行业的不断发展,数字信息时代已经到来.在这个以时间为主要提醒的代名词的时候,再加上在这个以数字为主流方向的时刻,数字时钟在生活和工作中显得尤为重要,需求也是不断的增强,对人们 ...
基于stm32f1（正点原子）的tft_lcd（ILI9341）学习
这里写目录标题一.TFT简介 1.显存 2.指令 3.常用指令 1.读 ID4 指令 2.存储访问控制指令 3.列地址设置指令 4.页地址设置指令 5.写 GRAM 指令 6.读 GRAM 指令 3 ...
基于STM32F103的简易示波器设计
基于STM32F103的简易示波器设计(基于正点原子mini开发板) 摘要本设计采用STM32F103微控制器,硬件为正点原子的MiniSTM32开发板,设计一个示波器,能够测量输入信号的频率.最大 ...
STM32F103 TFTLCD显示实验(一)
文章内容本文将介绍有关TFTLCD的有关知识,包括几个部分,分别如下: TFTLCD简介相关指令配置步骤 FSMC简介由于篇幅过长,因此,代码讲解放到下一章中,链接如下: STM32F103 ...
【正点原子STM32连载】第二十五章 TFT-LCD（MCU屏）实验摘自【正点原子】STM32F103 战舰开发指南V1.2
1)实验平台:正点原子stm32f103战舰开发板V4 2)平台购买地址:https://detail.tmall.com/item.htm?id=609294757420 3)全套实验源码+手册+视 ...
藏经阁（八）LCD控制器 ILI9341 解析
文章目录 TFT屏幕介绍 LCD控制器 ILI9341控制器内部框图 ILI9341时序详解 RGB565数据格式相关命令详解 1.读芯片ID号 (0xD3) 2.内存访问控制(0x36) 3.横向 ...
正点原子：STM32F103(战舰)、STM32F407(探索者)、STM32F103(MINI)原理图和PCB
目录 1.STM32F103(战舰) 2.STM32F407(探索者) 3.STM32F103(MINI) 为各位嵌入式好朋友分享三个重磅资源,正点原子三件套,可直接打样使用~ 1.STM32F103 ...
STM32F103 与 STM32F407引脚兼容问题
===========突袭网收集的解决方案如下=========== 解决方案1: STM32F103有的功能407都有,并且这些功能的引脚完全兼容,只是程序不同而已... 而STM32F407有的功 ...
stm32f103最小系统的组成及各部分功能
今天来跟大家普及一下stm32f103单片机的最小系统组成和各部分功能. 一.什么叫最小系统最小系统就像我们人,我们活着每天都要吃饭,喝水. 饭和水就是我们的"燃料",离开它们我 ...

STM32f103——ILI9341

STM32f103——ILI9341相关推荐

最新文章

热门文章