本帖最后由 xujin071 于 2016-12-12 11:27 编辑

新买回的firefly-rk3288开发板，烧入最新的Android5.1.1编译的固件，一直卡在Android字符界面，进不了桌面，各位版主帮忙分析一下启动log信息。

[    2.338220] ======== PULL WL_REG_ON LOW! ========

[    2.338228] [WLAN_RFKILL]: rockchip_wifi_power: 0

[    2.346816] arm_release_ver of this mali_ko is 'r6p0-02rel0', rk_ko_ver is '13', built at '09:15:10', on 'Oct 22 2015'.

[    2.346900] mali ffa30000.gpu: Continuing without Mali clock control

[    2.346942] mali pd enabled

[    2.346955] clk enabled

[    2.346968] MALI_DVFS_STEP = 4, div_dvfs = 10

[    2.346978] mali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70

[    2.346988] mali_dvfs_infotbl[1].clock=297000,min_threshold=70,max_threshold=80

[    2.346998] mali_dvfs_infotbl[2].clock=417000,min_threshold=80,max_threshold=90

[    2.347008] mali_dvfs_infotbl[3].clock=480000,min_threshold=94,max_threshold=100

[    2.347111] turn on mali power

[    2.347125] kbase_platform_rk_init,register_reboot_notifier

[    2.347168] hrtimer: interrupt took 11959 ns

[    2.347273] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1

[    2.348078] mali ffa30000.gpu: Probed as mali0

[    2.349118] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '

[    2.349732] rk29_ipp: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '

[    2.350356] rk29_ipp: version magic '3.0.101+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '

[    2.351142] zram0: detected capacity change from 0 to 533413888

[    2.398062] Adding 520908k swap on /dev/block/zram0.  Priority:-1 extents:1 across:520908k SS

[    2.422039] EXT4-fs (mmcblk0p12): Unrecognized mount option "background_gc=on" or missing value

[    2.428887] bat_cap: oldcap path is /sys/devices/ff100000.adc

[    2.428939] bat_cap: oldcap_path no exist

[    2.429094] binder: 156:156 transaction failed 29189, size 0-0

[    2.429630] init: Warning!  Service displayd needs a SELinux domain defined; please fix!

[    2.433472] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'

[    2.433504] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'

[    2.433730] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead

[    2.434271] rtk_btusb: btchr_open: BT usb char device is opening

[    2.434290] rtk_btusb: btchr_open: Failed to get hci dev[NULL]

[    2.434306] rtk_btusb: btchr_open: BT usb char device is opening

[    2.434316] rtk_btusb: btchr_open: Failed to get hci dev[NULL]

[    2.434339] rtk_btusb: btchr_open: BT usb char device is opening

[    2.434349] rtk_btusb: btchr_open: Failed to get hci dev[NULL]

[    2.434364] rtk_btusb: btchr_open: BT usb char device is opening

[    2.434374] rtk_btusb: btchr_open: Failed to get hci dev[NULL]

[    2.438710] [WLAN_RFKILL]: wifi shut off power.

[    2.438727] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0

[    2.438734] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.

[    2.438795] 0,baud is:9600

[    2.438802] dhd_module_init: Exit err=0

[    2.438922] 1, baud is:115200

[    2.439069] 1, baud is:115200

[    2.439159] 0,baud is:9600

[    2.443338] 2, baud is:115200

[    2.443897] android_usb: already disabled

[    2.446128] read descriptors

[    2.446141] read strings

[    2.446171] pcd_pullup, is_on 1

[    2.497678] logd.auditd: start

[    2.516211] firefly_vga_get_enable 180, 1

[    2.516334] firefly_vga_get_status 186

[    2.516922] firefly_vga_set_mode 203

[    2.517499] firefly_vga_set_enable 159 enable:1

[    2.792931] EHCI: rk_ehci_hcd_enable, disable host controller

[    2.792939] dwc_otg_hcd_enable, enable host controller

[    2.823286] rk3288-lcdc lcdc0: blank mode:0

[    2.896677] Using Buffer DMA mode

[    2.896689] Periodic Transfer Interrupt Enhancement - disabled

[    2.896694] Multiprocessor Interrupt Enhancement - disabled

[    2.896700] OTG VER PARAM: 0, OTG VER FLAG: 0

[    2.896705] ^^^^^^^^^^^^^^^^^^Host Mode

[    2.940616] Init: Power Port (0)

[    3.255433] Indeed it is in host mode hprt0 = 00021501

[    3.413597] healthd: No charger supplies found

[    3.413610] healthd: No battery devices found

[    3.432545] usb 3-1: new high-speed USB device number 2 using usb20_host

[    3.432611] Indeed it is in host mode hprt0 = 00001101

[    3.629539] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101

[    3.629550] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[    3.629557] usb 3-1: Product: USB 2.0 Hub [MTT]

[    3.630136] hub 3-1:1.0: USB hub found

[    3.630191] hub 3-1:1.0: 4 ports detected

[    3.904948] usb 3-1.1: new low-speed USB device number 3 using usb20_host

[    4.007217] usb 3-1.1: New USB device found, idVendor=093a, idProduct=2510

[    4.007228] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    4.007235] usb 3-1.1: Product: USB Optical Mouse

[    4.007241] usb 3-1.1: Manufacturer: PixArt

[    4.010535] input: PixArt USB Optical Mouse as /devices/ff540000.usb/usb3/3-1/3-1.1/3-1.1:1.0/input/input3

[    4.011296] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ff540000.usb-1.1/input0

shell@firefly:/ $ [    8.696950] [otg id chg] last id -1 current id 1

[    8.696973] PortPower off

[    8.696980] rk_battery_charger_detect_cb , battery_charger_detect 6

[    8.796403] Using Buffer DMA mode

[    8.796419] Periodic Transfer Interrupt Enhancement - disabled

[    8.796425] Multiprocessor Interrupt Enhancement - disabled

[    8.796432] OTG VER PARAM: 0, OTG VER FLAG: 0

[    8.796438] ^^^^^^^^^^^^^^^^^Device Mode

[    8.894272] es8323_mic_state_ctrl read: 0

[    8.894289] mic_state_switch 0

[    8.894297] hp_det = 0,insert hp

[    8.894301] hp mic use intern

[    9.287339] ***************vbus detect*****************

[    9.289528] rk_battery_charger_detect_cb , battery_charger_detect 1

[    9.466583] Using Buffer DMA mode

[    9.466600] Periodic Transfer Interrupt Enhancement - disabled

[    9.466607] Multiprocessor Interrupt Enhancement - disabled

[    9.466614] OTG VER PARAM: 0, OTG VER FLAG: 0

[    9.466620] ^^^^^^^^^^^^^^^^^Device Mode

[    9.466660] *******************soft connect!!!*******************

[    9.584171] USB RESET

[    9.621746] android_work: sent uevent USB_STATE=CONNECTED

[    9.625342] USB RESET

[    9.698655] android_usb gadget: high-speed config #1: android

[    9.698760] android_work: sent uevent USB_STATE=CONFIGURED