ROM介绍：

sha1：3b1a53529f695a6e33c6e6f1d8e15a6dffa2b24e

md5：1d6f4a7d6300a821cd6a2d21a5692e4e

注：刷机之前请修改文件名为update.bin(港版固件为update.zip)才能被识别。

注意事項：

1. MX升級為Flyme 1.1.8後，不能降回至舊版本

2. 香港版手機升級内地版的系統軟體("update.bin")可能會造成應用程序數據不兼容的問題;

3. 請勿從非官方網站下載系統軟體更新檔

4. 升級系統軟體前, 請確定手機電量在20% 以上

5. 升級系統軟體有可能導致檔案遺失或損毀, 請把重要的個人資料或數據備份至電腦

6. 若升級系統軟體時勾選"Clear Data Simultaneously (Please backup your database)",升級後手機上的所有資料將會被刪除(如：備忘錄、郵件、連絡人等資訊)，不包括內置儲存空間的檔案，如音樂或照片等

7. 升級系統軟體時, 請勿關機或重新開機, 否則可能會導致系統檔案損毀而無法開機

8. 升級系統軟體後, 如出現系統異常重新啟動或應用程序強制關閉等情況,請嘗試重置手機

升級步驟:

1. 把MX系統軟體更新檔update.zip複製到MX的內置儲存空間的根目錄

2. 把MX關機

3. 等待MX完全關機後，同時按住電源鍵和音量加鍵開機

4. 成功進入系統升級模式後，按Upgrade即可進行系統升級

5. 系統升級中，此時請勿關機

6. 等待系統升級完成後，MX會自動重新啟動

7. 進入 設定->關於手機，查看系統版本是與下載的系統軟體版本相同，如果相同說明本次系統軟體升級成功

變更記錄：

系統為電池提供智能保護，改善在低溫情況下的充電流程

英文原文

Suitable model: MX(M030/M031/M032)

Warning:

1. After MX upgraded Flyme 1.1.8, it can't resume back to previous version

2. Upgrading HK MX with the mainland China Simple Chinese version firmware may lead to compatibility issues

3. Please do not upgrade the device with non-official firmware

4. Before upgrading, check that the battery has at least 20% capacity

5. To avoid loss of data & if required, please perform Flyme or relevant backups before upgrading

6. Selecting "Clear Data Simultaneously (Please backup your database)" on the upgrade screen will delete all personal data (such as Notes, Email, and Contacts). Music and Camera photos will remain intact.

7. To avoid bricking the phone, do not turn off or reboot the device while upgrading

8. Reset your phone if you experience any stability issues after upgrading firmware

Upgrade procedure:

1. Copy firmware “update.zip” onto the root directory

2. Turn off the phone

3. Press and hold the Power and Volume Up buttons to enter upgrade mode

4. After entering upgrade mode, press Upgrade key to upgrade

5. System upgrading, please do not shut down the phone

6. The system will automatically reboot after upgraded

7. After boot up, please check “Settings -> About” to verify the correct firmware version is installed

Change Note:

Provides intelligent battery protection, improve the charging process at low temperatures.