高通平台如何修改特殊电压
转载：https://blog.csdn.net/qq_36781842/article/details/103721013
高通平台如何设置LDO电压，以LDO17为例，默认给屏供电，设置为2.85V现在设置为3.3V。
修改的rpm和sbl部分代码，修改LDO17电压为3.3V 。
(1).
--- a/RPM.BF.2.2/rpm_proc/core/systemdrivers/pmic/config/msm8937/pm_config_target.c
+++ b/RPM.BF.2.2/rpm_proc/core/systemdrivers/pmic/config/msm8937/pm_config_target.c
@@ -66,7 +66,7 @@ static pm_rpm_ldo_rail_info_type ldo_rail_a[] =
{5, 50, 0, PM_ACCESS_ALLOWED, PM_NONE, PM_NPA_SW_MODE_LDO__IPEAK, PM_NPA_BYPASS_DISALLOWED, PM_DROOP_DETECT_DIS, 1775, 3325, 0, PM_SETTLING_ERR_DIS, PM_SETTLING_EN, 0}, // LDO14 ULT P50
{5, 50, 0, PM_ACCESS_ALLOWED, PM_NONE, PM_NPA_SW_MODE_LDO__IPEAK, PM_NPA_BYPASS_DISALLOWED, PM_DROOP_DETECT_DIS, 1775, 3325, 0, PM_SETTLING_ERR_DIS, PM_SETTLING_EN, 0}, // LDO15 ULT P50
{5, 50, 0, PM_ACCESS_ALLOWED, PM_NONE, PM_NPA_SW_MODE_LDO__NPM, PM_NPA_BYPASS_DISALLOWED, PM_DROOP_DETECT_DIS, 1800, 1800, 0, PM_SETTLING_ERR_EN, PM_SETTLING_EN, 0}, // LDO16 P50 - removed in 8909
- {5, 50, 0, PM_ACCESS_ALLOWED, PM_NONE, PM_NPA_SW_MODE_LDO__NPM, PM_NPA_BYPASS_DISALLOWED, PM_DROOP_DETECT_DIS, 2800, 2900, 0, PM_SETTLING_ERR_DIS, PM_SETTLING_EN, 0}, // LDO17 ULT P600
+ {5, 50, 0, PM_ACCESS_ALLOWED, PM_NONE, PM_NPA_SW_MODE_LDO__NPM, PM_NPA_BYPASS_DISALLOWED, PM_DROOP_DETECT_DIS, 2800, 3300, 0, PM_SETTLING_ERR_DIS, PM_SETTLING_EN, 0}, // LDO17 ULT P600
{5, 50, 0, PM_ACCESS_ALLOWED, PM_NONE, PM_NPA_SW_MODE_LDO__NPM, PM_NPA_BYPASS_DISALLOWED, PM_DROOP_DETECT_DIS, 2675, 2725, 0, PM_SETTLING_ERR_DIS, PM_SETTLING_EN, 0}, // LDO18 ULT P150
{5, 62.5, 0, PM_ACCESS_ALLOWED, PM_NONE, PM_NPA_SW_MODE_LDO__IPEAK, PM_NPA_BYPASS_DISALLOWED, PM_DROOP_DETECT_DIS, 1225, 1375, 0, PM_SETTLING_ERR_DIS, PM_SETTLING_EN, 0}, // LDO19 LDO WLAN
{5, 250, 0, PM_ACCESS_ALLOWED, PM_NONE, PM_NPA_SW_MODE_LDO__NPM, PM_NPA_BYPASS_DISALLOWED, PM_DROOP_DETECT_DIS, 1740, 1740, 0, PM_SETTLING_ERR_EN, PM_SETTLING_EN, 0}, // LDO20 LDO XO LDO - LN_LDO
（2）、
--- a/BOOT.BF.3.3/boot_images/core/systemdrivers/pmic/target/msm8937_pm8937_pmi8937/system/src/pm_sbl_boot_oem.c
+++ b/BOOT.BF.3.3/boot_images/core/systemdrivers/pmic/target/msm8937_pm8937_pmi8937/system/src/pm_sbl_boot_oem.c
@@ -75,7 +75,9 @@ pm_err_flag_type
pm_driver_post_init (void)
{
pm_err_flag_type err_flag = PM_ERR_FLAG__SUCCESS;
-
+ pm_ldo_sw_enable(0, PM_LDO_17, PM_OFF); //disable LDO
+ pm_ldo_volt_level(0, PM_LDO_17, 3300000); //change LDO range
+ pm_ldo_sw_enable(0, PM_LDO_17, PM_ON); //enable LDO again
return err_flag;
}
（3）、
--- a/kernel/msm-3.18/arch/arm/boot/dts/qcom/msm8937-mdss-panels.dtsi
+++ b/kernel/msm-3.18/arch/arm/boot/dts/qcom/msm8937-mdss-panels.dtsi
@@ -35,8 +35,8 @@
qcom,panel-supply-entry@0 {
reg = <0>;
qcom,supply-name = "vdd";
- qcom,supply-min-voltage = <2850000>;
- qcom,supply-max-voltage = <2850000>;
+ qcom,supply-min-voltage = <3300000>;
+ qcom,supply-max-voltage = <3300000>;
qcom,supply-enable-load = <100000>;
qcom,supply-disable-load = <100>;
};
高通官方给出的修改建议：
1. LDO default voltage, range and default using devices can be found at PMIC device specification
doc
Such as 80-NJ117-1 table 3-7 for PM8994, 80-NT390-1 table 3-6 for PM8952
2. If you want to change the LDO voltage, please check first
a. can't set the LDO voltage bigger than the max programmable range
b. check HW, confirm the voltage don't impact other devices
c. Don't suggest change the LDO which used by RF or GPS default to other devices
3. LDO comman range and index
File: \rpm_proc\core\systemdrivers\pmic\config\common\pm_config_common.c
N1200, such as PM8994 L1
pm_pwr_volt_info_type n1200_volt[3] =
{
{ 375000, 1537500, 12500}, //LDO 0 (auto low range)
{ 375000, 1537500, 12500}, //LDO 1 (ultra low range)
{ 750000, 1537500, 12500}, //LDO 2 (low range)
};
N600, such as L26
pm_pwr_volt_info_type n600_volt[3] =
{
{ 0, 0, 0}, //LDO //invalid range -- place holder
{ 375000, 1287500, 12500}, //LDO 1 (ultra low range)
{ 750000, 1537500, 12500}, //LDO 2 (low range)
};
Other, N300, such as L2
pm_pwr_volt_info_type nmos_volt[3] =
{
{ 0, 0, 0}, //invalid range -- place holder
{ 0, 0, 0}, //invalid range -- place holder
{ 750000, 1537500, 12500}, //LDO 2 (low range)
};
PMOS LDO,
pm_pwr_volt_info_type pmos_volt[5] =
{
{ 0, 0, 0}, //invalid range -- place holder
{ 0, 0, 0}, //invalid range -- place holder
{ 750000, 1537500, 12500}, //LDO 2 (low range)
{1500000, 3075000, 25000}, //LDO 3 (mid range)
{1750000, 4900000, 50000}, //LDO 4(high range)
};
4. LDO control by RPM, need to check or change the range at RPM first
You must set the voltage in one range according above table, RPM will check it, if it is not right, will
crash.
Such as PMOS,
index 2: 750mv to 1537MV
index 3: 1500mv to 3075mv
index 4: 1750mv to 4900mv
Example for L23 of PM8994,
rpm_proc\core\systemdrivers\pmic\config\msm8996\pm_config_target.c
pm_rpm_ldo_rail_info_type ldo_rail_a[] =
{
{10, 200, 0, PM_ACCESS_ALLOWED, PM_NONE, PM_NPA_SW_MODE_LDO__IPEAK,
PM_NPA_BYPASS_ALLOWED, PM_DROOP_DETECT_DIS, 2700, 2900, 0,
PM_SETTLING_ERR_EN, PM_SETTLING_EN, 0}, // LDO23 P600
}
L23 min voltage is 2700mv, max voltage is 2900mv,
From index range, L23 current index is 3,
If change L23 to 3V, can change 2900 to 3075 directly,
If change L23 to 3.3V, for PMOS index 3 max voltage is 3075V, need change to index 4,
So, can change min 1750 max 3300 or just change max to 3300, min still keep 2700
But can't change min to 1700, for index 4, min voltage is 1750
5. Change the codes at SBL
If LDO range is changed, must change it at SBL before RPM loaded, else will crash at RPM for
index diff.
a. If index don't change, don't need to enable LDO also, don't need to change any codes at SBL,
just need to change at kernel
b. If index don't change, need to enable LDO at SBL
pm_ldo_volt_level(0, PM_LDO_23, 3000000); //set LDO voltage
pm_ldo_sw_enable(0, PM_LDO_23, PM_ON); //enable LDO at SBL
c. If index change, LDO default is off
pm_ldo_volt_level(0, PM_LDO_23, 3300000); //change LDO range
pm_ldo_sw_enable(0, PM_LDO_23, PM_ON); //enable LDO
d. If index change, LDO default is on, need to disable it first, then change the index
pm_ldo_sw_enable(0, PM_LDO_23, PM_OFF); //disable LDO
pm_ldo_volt_level(0, PM_LDO_23, 3300000); //change LDO range
pm_ldo_sw_enable(0, PM_LDO_23, PM_ON); //enable LDO again
e. Where add the codes?
1) Old platform, such as msm8916, msm8939/8909
boot_images\core\systemdrivers\pmic\framework\src\pm_init.c
At the end of function pm_oem_init( )
2) msm8952/53/37/76 platform
This file is pm_sbl_boot_oem.c, but need to change at the right platform path,
At the end of function pm_driver_post_init ( )
Path for diff platform,
boot_images\core\systemdrivers\pmic\target\msm8953_pm8953_pmi8950\system\src\
boot_images\core\systemdrivers\pmic\target\msm8952_pm8950_pmi8950\system\src\
boot_images\core\systemdrivers\pmic\target\msm8976_pm8950_pmi8950_pm8004\
system\src
3) msm8994/96 change at XBL
\boot_images\QcomPkg\Library\PmicLib\target\msm8996_pm8994_pmi8994\system\src\
pm_sbl_boot_oem.c
At the end of function pm_driver_post_init ( )
4) At new platform must add in pm_driver_post_init ( ), if add in pm_device_post_init( ), for LDO
don't init, also will crash at RPM
6. Change the voltage at kernel
Change voltage min, max and init value at dtsi
\arch\arm\boot\dts\qcom\msm8996-regulator.dtsi
rpm-regulator-ldoa23 {
status = "okay";
pm8994_l23: regulator-l23 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
qcom,init-voltage = <2800000>;
status = "okay";
};
};
7. How to use the LDO at kernel side
Can check the doc 80-NV610-47 for PM8952 and 80-NM328-63 for PM8994.
One attention, must call egulator_set_optimum_mode( ) before enable LDO, it will set LDO to
normal mode.
Can check the sample codes in msm_hsusb_ldo_enable( )
static int msm_hsusb_ldo_enable( )
{
case USB_PHY_REG_3P3_ON:
ret = regulator_set_optimum_mode(hsusb_3p3,
USB_PHY_3P3_HPM_LOAD);
ret = regulator_enable(hsusb_3p3);
break;
case USB_PHY_REG_3P3_OFF:
ret = regulator_disable(hsusb_3p3);
ret = regulator_set_optimum_mode(hsusb_3p3, 0);
break;
}
高通平台如何修改特殊电压相关推荐
- 高通平台耳机知识记录
一. 在高通平台中,默认使用内部codec的时候,耳机的输出及控制都是在内部codec中进行的,所以,可以想象得到,耳机的整个初始化起源过程,是在codec的初始化中.高通平台的machine驱动文件 ...
- 高通平台耳机知识记录（转载）
一. 在高通平台中,默认使用内部codec的时候,耳机的输出及控制都是在内部codec中进行的,所以,可以想象得到,耳机的整个初始化起源过程,是在codec的初始化中.高通平台的machine驱动文件 ...
- 高通平台 设置LDO电源域
高通平台如何设置LDO电压,以LDO17为例,默认给屏供电,设置为2.85V现在设置为3.3V. 修改的rpm和sbl部分代码,修改LDO17电压为3.3V . (1). --- a/RPM.BF.2 ...
- 高通平台提高核电电压
高通平台提高核电电压 高通平台有一些异常的复位重启以及死机问题,抓不到dump信息,很可能和核电的电压有关系.我们可以提升核电电压来确认是否是该问题. 修改文件在rpm中: rpm_proc/core ...
- 高通平台第一帧splash和Bootanimation修改
高通平台第一帧splash和Bootanimation A.Splash image/第一帧图像/开机logo(有很多叫法,但比较官方的一般叫bootloader logo或者LK display l ...
- 高通平台添加或者移植一个完整的camera
OV8865 1.kernel部分: A.kernel_driver: 把驱动文件ov8865_qtech_f8865ac.c 放到kernel/drivers/media/platform/msm/ ...
- 高通平台环境搭建，编译，系统引导流程分析 .
1.高通平台android开发总结 1.1 搭建高通平台环境开发环境 在高通开发板上烧录文件系统 建立高通平台开发环境 高通平台,android和 modem 编译流程分析 高通平台 7620 启动流 ...
- 高通平台 /sys/module/lpm_levels/parameters/sleep_disabled节点
高通平台 /sys/module/lpm_levels/parameters/sleep_disabled节点默认值为N,可通过修改init.rc文件来修改,最近遇到一个问题,就是两台设备韦根测试收发 ...
- Android高通平台调试Camera驱动全纪录
项目比较紧,3周内把一个带有外置ISP,MIPI数据通信,800万像素的camera从无驱动到实现客户全部需求. 1日 搭平台,建环境,编译内核,烧写代码. 我是一直在Window下搭个虚拟机登服务器 ...
最新文章
- “小霸王学习机”再现？树莓派400正式发布，售价70美元
- 给Clouderamanager集群里安装基于Hive的大数据实时分析查询引擎工具Impala步骤（图文详解）...
- hive数据仓库建设
- [游戏模版21] Win32 物理引擎 能量守恒
- 银行业数据中心性能测试的策略与实践（PPT）
- datastore_使用Spring Session和JDBC DataStore进行会话管理
- 肖仰华 | 大规模、高质量的金融知识图谱，如何自动化构建？
- android新建项目错误,新建Android项目出错
- HDU5763 Another Meaning（KMP+dp）
- Kaggle入门预测赛，手写数字识别Digit Recognizer，使用Kaggle kernel作答，F=0.98
- property 、classmethod 、 staticmethod 的用法
- Stata 16(统计学软件) v16.0中文版安装教程
- 《超越宝典汽配汽修管理系统——“美容管理”模块》项目研发阶段性总结
- android绘制半圆弧线_半圆形进度条Android - 绘制半圆
- [spring boot] 我的图床我做主，自己动手写一个shareX图床
- snubber电路总结
- c语言选择结构作用,c语言选择结构程序设计教案
- PostgreSQL学习篇9.3 浮点数类型
- 微信小程序setData注意事项，使用方法
- 离子液体N-丙基-吡啶二氰胺盐[C3py][DCA]|N-丙基-吡啶二氰胺[C3py][DCA]|齐岳
热门文章
- 写定时任务发送邮件报错(Could not connect to SMTP host:smtp.exmail.qq.com,port:465)
- 图片还原去遮挡_[转摘]图像复原(图片去噪与去模糊)-低级图像处理/视觉任务
- 如何在Word里的字母上方添加特殊符号——“拼音指南”+“切换域代码”完美解决！
- python实现：计算字符的个数，接受一个由字母和数字组成的字符串和一个字符，然后输出输入的字符串中含有该字符的个数。不区分大小写。
- 三分钟学会图片（ImageView）拖动和放大缩小
- 关于C的表达式未定义行为
- 用Jupyter Notebook集成Symphony大数据平台实践金融分析
- 使用Web3JS的API在页面中进行转账交易-案例
- 用户编号与计算机绑定,手机绑定了什么怎么查-太平洋IT百科手机版
- Sublime Text 常用热键