在国际学术刊物发表SCI文章180余篇，包括在Advanced Materials 发表8篇、Physical Review Letters 2篇；Acta Materialia 14篇；Nanoscale 2篇；Scripta Mater.9篇、MSEA 21篇、APL8篇、JAC7篇；。论文被他人SCI引用10000余次，H index = 49，第一作者论文有2篇被SCI引用超过500次、15篇被SCI引用超过100次；授权美国发明专利1项，中国发明专利30余项，国际学术会议摘要110余篇，包括4次大会特邀报告和20余次邀请报告。详见 https://publons.com/researcher/2872257/yonghao-zhao/publications/

近三年， 发表SCI论文60余篇，第一/通讯40余篇，包括Acta Mater. Nanoscale, JMST等一区20余篇，JAC等二区论文20余篇。 详见https://publons.com/researcher/2872257/yonghao-zhao/publications/

代表性论文

Yue Yang, Xiang Chen*, Jinfeng Nie*, Kang Wei, Qingzhong Mao, Fenghua Lu, and Yonghao Zhao*, Exceptional high strength in applicable bulk magnesium-lithium alloys prepared by rotary swage

Materials Research Letters, in press, 2021

K. Wei, R. Hu, L.R. Xiao, Z.H. Hu, Y. Cao, D.D. Yin, H. Zhou*, Y.H. Zhao*, Y.T Zhu*, Grain size effect on tensile properties and deformation mechanisms of pure magnesium

Acta Mater.2020, 206, 116604

Silu Liu , Y.Z. Guo , Z.L. Pan , X.Z. Liao , E.J. Lavernia , Y.T. Zhu, Q.M. Wei, Yonghao Zhao*

Microstructural softening induced adiabatic shear banding in Ti-23Nb-0.7Ta-2Zr-O gum metal

J. Mater. Sci. Tech. 2020, 54, 31-39

4. Kang Wei, Lirong Xiao, Bo Gao, Lei Li, Yi Liu, Zhigang Ding, Wei Liu, Hao Zhou*, Yonghao Zhao*

Enhancing the strain hardening and ductility of Mg alloy by introducing stacking faults,

J. Magnesium and Alloys, 2020, 30 June, http://doi.org/10.1016/j.jma.2019.09.015

5. Jinfeng Nie, Yuyao Chen; Xiang Chen; Xiangfa Liu; Guiliang Liu; Yonghao Zhao*; yuntian zhu

Stiff, strong and ductile heterostructured aluminum composites reinforced with oriented nanoparticles

Scripta Mater,189 (2020) 140–144

6. Yingchun Wan, Bei Tang, Yonghao Gao, Lingling Tang, Gang Sha, Bo Zhang, Ningning Liang, Chuming Liu*, Shunong Jiang, Zhiyong Chen, Xueyi Guo, Yonghao Zhao*

Bulk Nanocrystalline High-Strength Magnesium Alloys Prepared via  Rotary Swaging

Acta Mater. 2020, ,200, 274-286

A promising new class of irradiation tolerant materials: Ti2ZrHfV0.5Mo0.2 high-entropy alloy

J. Mater. Sci. Tech., 35, 369-373, 2019.

8. Yiping Lu, Xiaoxia Gao Yong Dong, ,Tongmin Wang, NingLiu, Li Jiang, Yonghao Zhao*, Jinchuan Jie, Huijun Kang, Sheng Guo, Zhiqiang Cao, Tingju Li

Low-cost efficient preparation of bulk quasi-nanocrystallinemetal alloy material by direct 才rystallization method

Nanoscale, 2018, 10, 1912-1919.

9. Xuzhou Gao, YipingLu, Bo Zhang, GuanzhongWu, Gang Sha, Jizhi Liu, YonghaoZhao*

Microstructural origins of high strength and high ductility in AlCoCrFeNi2.1 eutectic high-entropy alloy

Acta Mater. 2017, 141, 59-66.

10. S.L. Liu, Y.Z. Guo, Yonghao Zhao*, Q.M. Wei, X.Z. Liao, Y.T. Zhu, E.J. Lavernia,

Dynamic properties and structural evolution of gum metal

Acta Mater.2017, 132, 193-208.

11. Sheng Cheng, Yonghao Zhao*, et al.

Structure modulation driven by cyclic deformation in nanocrystalline NiFe alloy

Phys. Rev. Lett., 24 June 2010, vol. 104, no. 25, p. 255501

12. Sheng Cheng, Yonghao Zhao*, et al.

High plasticity and substantial deformation in nanocrystalline alloys under dynamic loading

Adv. Mater. 2 Oct 2009; vol. 21, no. 48, p. 5001-5004

13. Y.H. Zhao,et al.

High tensile ductility and strength in bulk nanostructured nickel

Adv. Mater.; 18 Aug 2008; vol.20, no.16, p.3028-3033

14.Y.H. Zhao,X.Z. Liao, S. Cheng, E. Ma and Y.T. Zhu

Simultaneously increasing the ductility and strength of nanostructured alloys

Adv. Mater.; 5 Sep 2006; vol.18, no.17, p.2280-2283

15.  Y.H. Zhao, et al.

Simulteneously elevating the ductility and strength of ultra-fine grained pure Cu

Adv. Mater.; 17 Nov 2006; vol.18, no.22, p.2949-2953

16.Y.H. Zhao, X.Z. Liao, Z. Jin, R.Z. Valiev and Y.T. Zhu

Microstructure and mechanical properties of ultra-fine grained 7075 Al alloys processed by ECAP and their evolutions during annealing

Acta Mater.; 6 Sep 2004; v.52, no.15, p.4589-4599

17.Y.H. Zhao, H.W. Sheng and K. Lu

Microstructural evolution and thermal properties in nanocrystalline Fe during mechanical attrition

Acta Mater.; 22 Jan 2001; v.49, no.2, p.365-375

近3年发表SCI英文论文

1.Yue Yang, Xiang Chen*, Jinfeng Nie*, Kang Wei, Qingzhong Mao, Fenghua Lu, and Yonghao Zhao*

Exceptional high strength in applicable bulk magnesium-lithium alloys prepared by rotary swage

MRL, in press, 2021

2.Silu Liu, Jian Yin, Yonghao Zhao*

Revealing twinning from triple lines in nanocrystalline copper via molecular dynamics simulation and experimental observation

JMR&T, 2021, in press,

3.王伟彤，陈淑英，张 勇*，赵永好*

高熵合金强韧化方法及力学性能研究进展,

， in press, 2021

4. Yonghao Zhao*

A new strategy to avoid grain boundary precipitation and strength-toughness loss of precipitation strengthened alloys - in situthermal mechanical processing

Trans. Nonferrous Metals Soc. China 2021, in press

5. Silu Liu,  Yonghao Zhao*

Mechanical properties, deformation and fracture mechanisms of bimodal Cu under tensile test

Rev. Adv. Mater. Sci. 2021, in press

6.K. Wei, R. Hu, L.R. Xiao, Z.H. Hu, Y. Cao, D.D. Yin, H. Zhou*, Y.H. Zhao*, Y.T Zhu*

Grain size effect on tensile properties and deformation mechanisms of pure magnesium

7. Ao Meng, Xiang Chen*, Jinfeng Nie, Lei Gu, Qingzhong Mao, Yonghao Zhao*

Microstructure evolution and mechanical properties of commercial pure titanium subjected to rotary swaging

Journal of Alloys and Compounds 859 (2020) 158222

8.Xueran Liu, Limin Zhuang, Yonghao Zhao*

Microstructure and mechanical properties of ultrafine-grained copper by accumulative rollbonding and subsequent annealing

Materials 2020, 13(22), 5171; https://doi.org/10.3390/ma13225171 (registering DOI)

9.Jinfeng Nie, Yuyao Chen; Xiang Chen; Xiangfa Liu; Guiliang Liu; Yonghao Zhao; yuntian zhu

Key roles of particles in grain refinement and material strengthening for an aluminum matrix composite

MSEA 2020-07-2413 January 2021Volume 801Article 140414

10.Ningning Liang, XiangWang, Yang Cao*, Yusheng Li , Yuntian Zhu, Yonghao Zhao*

Effective Surface Nano-Crystallization of Ni2FeCoMo0.5V0.2 Medium Entropy Alloy by Rotationally Accelerated Shot Peening (RASP)

Entropy 2020, 22, 1074; doi:10.3390/e22101074

11. Lei Song;  Jinfeng Nie*; Fenghua Lu; Feng Jin; Yusheng Li; guiliang Liu; Xiangfa Liu; Yonghao Zhao*

Effect of rolling deformation on microstructure and tensile properties of heterogenous AlNp/Al nanocomposites with particle network,

12.Yingchun Wan, Bei Tang, Yonghao Gao, Lingling Tang, Gang Sha, Bo Zhang, Ningning Liang, Chuming Liu*, Shunong Jiang, Zhiyong Chen, Xueyi Guo*, Yonghao Zhao*

Bulk Nanocrystalline High-Strength Magnesium Alloys Prepared via  Rotary Swaging

Acta Mater. 2020,Volume 200, November 2020, Pages 274-286

13. Yonghao Zhao*, J.Z. Liu, T. Toppimg, E. J. Lavernia

Precipitation and aging phenomena in an ultrafine grained Al-Zn alloy by severe plastic deformation

J. Alloys and Compound, 2020,Available online 31 August 2020, 156931, Volume 851, 15 January 2021, 156931

14.Jinfeng Nie*, Yuyao Chen; Xiang Chen; Xiangfa Liu; Guiliang Liu; Yonghao Zhao*;YuntianZhu

Stiff, strong and ductile heterostructured aluminum composites reinforced with oriented nanoplatelets

15. Xuzhou Gao, Liangjun Dai, Yonghao Zhao*

Twin boundary-dislocation interactions in nanocrystalline Cu-30% Zn alloys prepared by high pressure torsion

Journal of Materials Research and Technology, 2020, Volume 9, Issue 5, September–October 2020, Pages 11958-11967, https://doi.org/10.1016/j.jmrt.2020.08.060

16. Kang Wei, Lirong Xiao, Bo Gao, Lei Li, Yi Liu, Zhigang Ding, Wei Liu, Hao Zhou*, Yonghao Zhao*

Enhancing the strain hardening and ductility of Mg alloy by introducing stacking faults,

17.  Silu Liu , Y.Z. Guo , Z.L. Pan , X.Z. Liao , E.J. Lavernia , Y.T. Zhu, Q.M. Wei, Yonghao Zhao*

Microstructural softening induced adiabatic shear banding in Ti-23Nb-0.7Ta-2Zr-O gum metal

J. Mater. Sci. Tech.2020,Volume 54, 1 October 2020, Pages 31-39

Critical microstructures and defects in heterostructured materials and their effects on mechanical properties

Acta Materialia, Volume 189, 1 May 2020, Pages 129-144

19. Jinfeng Nie , Fenghua Lu , Zhaowen Huang , Xia Ma , Hao Zhou , Cai Chen , Xiang Chen , Huabing Yang , Yang Cao , Xiangfa Liu* , Yonghao Zhao*, Yuntian Zhu

Improving the high-temperature ductility of Al composites by tailoring the nanoparticle network

Materialia 9 (2020) 100523

20. Fenghua Lu, Jinfeng Nie*, Xia Ma, Yusheng Li, Zhouwen Jiang, Yong Zhang, Yonghao Zhao, Xiangfa Liu*

Simultaneously improving the tensile strength and ductility of the AlNp/ Al composites by the particle’s hierarchical structure with bimodal distribution and nano-network

Materials Science & Engineering A770 (2020) 138519

21. Y.H. Zhao*, J.F. Bingert, T.D. Topping, P.L. Sun, X.Z. Liao, Y.T. Zhu, E.J. Lavernia

Mechanical behavior, deformation mechanism and microstructure evolutions of ultrafine-grained Al during recovery via annealing

Mater. Sci. Eng. A, 2020, vol. 772, pp. 138706. https://doi.org/10.1016/j.msea.2019.138706

22.L. Gu, Y.H. Zhao*

Revealing intrinsic lattice expansion and grain boundary excess volume of nanocrystalline Se prepared via various methods

Materialia 9 (2020) 100535

23.Xuzhou Gao, Yiping Lu, Jizi Liu, Jun Wang, Tongming Wang, Yonghao Zhao*

Extraordinary ductility and strain hardening of Cr26Mn20Fe20Co20Ni14 TWIP high-entropy alloy by cooperative planar slipping and twinning

Materialia, 2019, 100485

24. Wei Jiang, Hao Zhou, Yang Cao,* Jinfeng Nie, Yusheng Li, Yonghao Zhao, Megumi Kawasaki, Terence G. Langdon, and Yuntian Zhu*

On the Heterogeneity of Local Shear Strain Induced by High-Pressure Torsion

Adv. Eng. Mater. 2019, 1900477

25. Yuyao Chen, Jinfeng Nie*, Fang Wang, Huabing Yang, Chongchong Wu, Xiangfa Liu, Yonghao Zhao*

Revealing hetero-deformation induced (HDI) stress strengthening effect in laminated Al-(TiB2+ TiC)p/6063 composites prepared by accumulative roll bonding

J. Alloys and Compounds, 2019, 152285

26. Jinfeng Nie, Fang Wang, Yuyao Chen, Qingzhong Mao, Huabing Yang, Zhiwei Song, Xiangfa Liu, Yonghao Zhao*

Microstructure and corrosion behavior of Al-TiB2/TiC composites processed by hot rolling

Results in Physics, 14, 102471, 2019

27. Ao Meng, Jinfeng Nie, Kang Wei, Huijun Kang, Zhuangjia Liu, Yonghao Zhao*

Optimization of strength, ductility and electrical conductivity of a Cu–Cr–Zr alloy by cold rolling and aging treatment

Vacuum 167 (2019) 329–335

28. Yang, Yue; Nie, Jinfeng ; Mao, Qingzhong, Zhao Yonghao*

Improving the combination of electrical conductivity and tensile strength of Al 1070 by rotary swaging deformation

Results in Physics, 13, 102236, 2019

Grain size effect on deformation twin thickness in a nanocrystalline metal with low stacking-fault energy

J. Mater. Res. 2019, 34,2398-2405.

A promising new class of irradiation tolerant materials: Ti2ZrHfV0.5Mo0.2 high-entropy alloy

J MaterSci& Tech,35,369-373,2019.

31.Yanfang Liu, Fang Wang, Yang Cao, Jinfeng Nie, Hao Zhou, Huabing Yang, Xiangfa Liu, Xianghai An, Xiaozhou Liao, Yonghao Zhao, Yuntian Zhu

Unique defect evolution during the plastic deformation of a metal matrix composite

Scripta Mater. 162 (2019) 316–320

J. Alloys and Compounds, 777, 8-17, 2019.

Y Liu, Y Cao, H Zhou, X Chen, Y Liu, L Xiao, X Huan, Y Zhao, Y Zhu

Advanced Engineering Materials, 1900478, 2019

ACS Appl. Mater. & Inter., 10, 8197-8204, 2018.

Inter. J. Adv. Manu. Tech., 99, 1967-1977, 2018

36. Ningning,Yonghao Zhao*, Q. Zhan, J.F. Bingert, E.J. Lavernia

Stabilizing ultrafine grained Cu by grain lamella

J. Mater. Sci.2018, v. 53, no. 18, 13173-13185

37. Zhigang Ding, Wei Liu, Hao Sun, Shuang Li, Dalong Zhang, Yonghao Zhao, Enrique J. Lavernia, and Yuntian Zhu

Origins and dissociation of pyramidal II dislocations in magnesium and its Alloys`

Acta Mater. 146, 265-272 (2018)

38. Yiping Lu, Xiaoxia Gao Yong Dong, Tongmin Wang, NingLiu, Li Jiang,  Yonghao Zhao*, Jinchuan Jie, Huijun Kang, Sheng Guo, Zhiqiang Cao, Tingju Li

Low-cost efficient preparation of bulk quasi-nanocrystallinemetal alloy material by direct crystallization method

Nanoscale, 10, 1912-1919, 2018.

39. Ningning Liang, Jizi Liu, Sicong Lin, Yue Wang , Jingtao Wang , Yonghao Zhao, Yuntian Zhu

A multiscale multiphase nested structure contributing high strength, high electrical conductivity and high thermal stability for Cu-Cr-Zr alloy

J. Alloys and Compounds, 735, 1389-1394, 2018

Proceedings of the Advances in Materials, Machinery, Electrical Engineering, 114, 79-82, 2017

ActaMetallurgica Sinica A, 53, 335-344, 2017

42. Li, Yusheng; Li, Lingzhen; Nie, Jinfeng; Cao, Yang; Zhao, Yonghao; Zhu, Yuntian Microstructure evolution and mechanical properties of 5052 alloy with gradient structures

J. Mater. Res.2017, 32, 4443-445

43. Jin-feng Nie, Yong-hao Zhao*, Fang Wang, Yu-sheng Li, Yan-fang Liu, Xiang-fa Liu,

Microstructure and mechanical properties of Al-TiB2/TiC in situ composites improved via hot rolling,

Transactions of Nonferrous Metals Society of China, 2017, 27, 2548-2554

44. B. Zhang, F. Xue, S. L. Li, N.N. Liang, Y.H. Zhao, G. Sha*

Materials Science Forum, 898, 818-25, 2017.

45. B. Zhang, F. Xue, S. L. Li, N.N. Liang, Y.H. Zhao, G. Sha*

Decomposition of ferrite in a duplex stainless steel during thermal aging

Acta Mater., 2017, 140, 388-397.

46. Xuzhou Gao, YipingLu, Bo Zhang, GuanzhongWu, Gang Sha, Jizhi Liu, YonghaoZhao*

Microstructural origins of high strength and high ductility in AlCoCrFeNi2.1 eutectic high-entropy alloy

Acta Mater.2017,141, 59-66.

47. X. Wang, Y. S. Li*, Q. Zhang, Y. H. Zhao, Y. T. Zhu,

Gradient Structured Copper Induced by Rotationally Accelerated Shot Peening,

J.Mater. Sci. & Tech. 2017, 33,758-761

48. Lingling Tang, Yonghao Zhao*, R. K. Islamgaliev, R. Z. Valiev, and Y. T. Zhu

Microstructure and thermal stability of nanocrystalline Mg-Gd-Y-Zr alloy processed by high pressure torsion

J. Alloys and Compounds, 2017, 721, 577-585.

49. Y.S. Zhang ,W. Zhang, J.J. Hu, J.W. Lu, P.X. Zhang, Y.H. Zhao*

Microstructure and mechanical property evolutions of bulk core-shell structured Ti-N alloys during annealing

J. Alloys and Compounds, 2017, 710, 428-423

50S.L. Liu, Y.Z. Guo, Yonghao Zhao*, Q.M. Wei, X.Z. Liao, Y.T. Zhu, E.J. Lavernia,

Dynamic properties and structural evolution of gum metal

Acta Mater.2017, vol. 132, 193-208.

51. Ningning Liang ,Yonghao Zhao*, Jingtao Wang , Yuntian Zhu

Comparison investigation of Charpy impact behavior of ultrafine-grain Cu with equi-axed and lamella grain structures

Scientific Report, 2017,7, 44783.

52. Y.H. Zhao*, Y.T. Zhu

Lattice expansion of nanocrystalline Se

Reviews on Advanced Materials Science, 2017, 48, 52-61

53. Jinfeng Nie, Mingxing  Liu, Fang Wang, Yusheng Li, Xiangfa  Liu; Yonghao Zhao*

Microstructure evolution and mechanical properties of Al-TiB2/TiC in situ aluminum based composites during Accumulative Roll Bonding (ARB) Process

Materials, 10, 2017, 109

54. Y.S. Zhang,,Y.H. Zhao*, W. Zhang, J.W. Lu, X.M. Zhang, P.X. Zhang

Formation of a core-shell network structural titanium-nitrogen composite with high strength

Sci. Rep. 7, 40039, 2017

55. Yiping Lu, Xiaoxia Gao, Yong Dong, ,Tongmin Wang, NingLiu, Li Jiang,  Yonghao Zhao, Jinchuan Jie, Huijun Kang, Sheng Guo, Zhiqiang Cao, Tingju Li

Directly cast bulk eutectic and near-eutectic high entropy alloys withbalanced strength and ductility in a wide temperature range

Acta Mater., 124, 143-150, 201

Z SONG, Y ZHAO, G WU, X GAO

China's Manganese Industry, 5, 2017