cadence SPB17.4 - allegro - WARNING: Unsupported curve-fit, spline, or 3D POLYLINE

概述

在做logo的封装.

本来想用PS画好图, 导出.ai, 用Adobe Illustrator 2022导出dxf, 然后在allegro中导入dxf, 就可以得到精确的logo图形.

想的很好, 试了一下不行. 有报错如下:

Reading Layer Conversion File
Reading DXF file...
NOTE: Replacing illegal character $ with X in $MODEL_SPACE.
NOTE: Replacing illegal character $ with X in $PAPER_SPACE.
done.
WARNING:  Unsupported curve-fit, spline, or 3D POLYLINE on line 1092
WARNING:  Unsupported curve-fit, spline, or 3D POLYLINE on line 23066
WARNING:  Unsupported curve-fit, spline, or 3D POLYLINE on line 43696
WARNING:  Unsupported curve-fit, spline, or 3D POLYLINE on line 65670

报错的意思: allegro不支持拟合曲线和样条曲线.

用autoCAD将dxf转成最早的R12版本和2018版本都不行.

白忙活了.

还是要用allegro导入logo图片的方法, 不过要自己调整导入图片时的比例, 要来回实验, 挺麻烦的.

END

cadence SPB17.4 - allegro - WARNING: Unsupported curve-fit, spline, or 3D POLYLINE相关推荐

cadence SPB17.4 - allegro - Artwork will be rounded down
cadence SPB17.4 - allegro - Artwork will be rounded down 前言出装配图时,弹出如下警告对话框具体提示信息如下: -------------- ...
cadence SPB17.4 - allegro - create and switch Visibility view
cadence SPB17.4 - allegro - create and switch Visibility view 文章目录 cadence SPB17.4 - allegro - creat ...
cadence SPB17.4 - allegro - allegro_free_viewer
cadence SPB17.4 - allegro - allegro_free_viewer 前言想看下板子连通后, 每条网络走线是否合理. 当然可以在cadenceSPB17.4_PCB Edi ...
cadence SPB17.4 - allegro - 尺寸标注
cadence SPB17.4 - allegro - 尺寸标注前言自己手欠,动了参数,导致标注时,效果看着和默认的不同. 看着好难受, 研究一下. 官方本地文档位置 D:/cadence/spb ...
cadence SPB17.4 - allegro - 手工放置过孔
cadence SPB17.4 - allegro - 手工放置过孔文章目录 cadence SPB17.4 - allegro - 手工放置过孔概述实验手工放置一个过孔给过孔分配网络拷贝 ...
cadence SPB17.4 - allegro - 手工放置原理图没有的封装
cadence SPB17.4 - allegro - 手工放置原理图没有的封装前言假设要在拼版中,放置mark点.那原理图中不可能有的. 或者就是要在成品PCB上,单独放一个新的PCB元件封装. ...
cadence SPB17.4 - allegro - 做logo封装
cadence SPB17.4 - allegro - 做logo封装前言板子铺好地铜了, 准备在顶层丝印层放个logo. 因为allegro是不支持中文的, 查资料, 都是导入dxf或者plt文 ...
cadence SPB17.4 - allegro添加过孔
cadence SPB17.4 - allegro添加过孔前言尝试放过孔数组,居然将allegro(SPB17.4 S026)搞成无响应了(不知道是哪操作不对,等多久都没反应),只能强行关闭all ...
cadence SPB17.4 - allegro - CAM350_V10.7CN 引入槽孔(.rou)文件报错问题的优雅解决思路
cadence SPB17.4 - allegro - CAM350_V10.7CN 引入槽孔(.rou)文件报错问题的优雅解决思路文章目录 cadence SPB17.4 - allegro - ...

cadence SPB17.4 - allegro - WARNING: Unsupported curve-fit, spline, or 3D POLYLINE

cadence SPB17.4 - allegro - WARNING: Unsupported curve-fit, spline, or 3D POLYLINE

概述

END

cadence SPB17.4 - allegro - WARNING: Unsupported curve-fit, spline, or 3D POLYLINE相关推荐

最新文章

热门文章