为便于点灯维护，更新以下型号的阵列卡及其对应的管理工具。阵列卡型号根据实际情况不定时更新

因现网环境不具备安装阵列卡管理工具时，又需要对硬盘进行操作管理，可以考虑通过带外执行。

一、阵列卡管理工具有storcli、megacli、sas2iru、sas3iru、arcconf、perccli等

下述涉及到的命令仅供参考，需根据现场实际情况确定

1、storcli：

点灯：/opt/MegaRAID/storcli/storcli64 /ccontroller_id/eenclosure_id/sslot_id start locate

关灯：/opt/MegaRAID/storcli/storcli64 /ccontroller_id/eenclosure_id/sslot_id stop locate

全部点灯：/opt/MegaRAID/storcli/storcli64 /call/eall/sall start locate

全部关灯：/opt/MegaRAID/storcli/storcli64 /call/eall/sall stop locate

适用的RAID卡：LSI SAS3108、Avago SAS3408iMR、Avago SAS3408IT、Avago SAS3416iMR、Avago SAS3416IT、Avago SAS3508、Avago SAS3004iMR、Avago SAS3516、LSI SAS9305-24i、Avago MegaRAID SAS 9460-8i、Avago MegaRAID SAS 9440-8i、Avago MegaRAID SAS 9460-16i、LSI SAS2208

2、megacli：

点灯：MegaCli64 -PDLocate -Start -PhysDrv[:slot_id] -acontroller_id

关灯：MegaCli64 -PDLocate -Stop -PhysDrv[:slot_id] -acontroller_id

适用的RAID卡：SoftRAID、SAS 9261-8i

3、sas2iru

点灯：sas2ircu controller_id locate enclosure_id:slot_id on

关灯：sas2ircucontroller_id locate enclosure_id:slot_id off

适用的RAID卡：LSI SAS2308

4、sas3iru

点灯：sas3ircu controller_id locate enclosure_id:slot_id on

关灯：sas3ircu controller_id locate enclosure_id:slot_id off

适用的RAID卡：LSI SAS3008 IR、LSI SAS3008 IT、

5、arcconf

点灯：arcconf identify controller_id device physical_id TIME time

关灯：arcconf identify controller_id device physical_id

对所有盘点灯：arcconf identify controller_id all TIME time

对所有盘关灯：arcconf identify controller_id all stop

适用的RAID卡：PM8222-SHBA、PM8060、PM8068、HBA-H460-M1、HBA-P460-M1、MSCC SmartRAID 3152-8i、MSCC SmartHBA 2100-8i、

6、perccli

点灯：perccli /cx/ex/sx start locate

关灯：perccli /cx/ex/sx stop locate

适用的RAID卡：H730、H750等（主要为dell服务器H系列RAID卡）